• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.438-441
• /
• 1998

In this paper, we proposes an adaptive flux observer to estimate initial values of rotor fluxes and unknown rotor resistance. The error system between the model of induction motor and a proposed observer is devided as a fast subsystem and a slow one by a singular perturbation system. The fast subsystem is exponentially convergent on a boundary-layer. And the overall error system is reduced to a quasi-steady-state system. The adaptive law for an unknown rotor resistance is designed to stabilize the approximate error system. As computer simulation results show, the proposed adaptive flux observer estimates fast initial values of rotor fluxes and unknown rotor resistance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.114-115
• /
• 2018

To develop an effective shielding material for spent fuel that emits fast neutrons is necessary. In this study, thermal neutron and fast neutron shielding performance of polyethylene coated boron carbide-incorporated cement paste was quantitatively analyzed by Monte Carlo N-Particle transport code (MCNP) simulations. As the results of the simulations, fast neutrons were effectively shielded through large quantity of hydrogen and boron elements in polyethylene and boron carbide.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.353-358
• /
• 2010

High pressure gas is a widely used storage mode for hydrogen fuel. A typical hydrogen tank that is charged with hydrogen gas can function as a hydrogen supply source in a large number of applications. The filling process of a high-pressure hydrogen tank should be reasonably short. However, when the fill time is short, the maximum temperature in the tank increases. Therefore the process should be designed in such a way to avoid high temperatures in the tank because of safety reasons. The paper simulates the fast filling process of hydrogen tanks using Computational Fluid Dynamics method. The local temperature distribution in the tank is obtained. Results obtained are compared with available experimental data. Further work is going on to improve the accuracy of the calculations.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.323-324
• /
• 2007

In this paper, we present the method of skipping the quantization for fast video encoding. Based on the theoretical analyzes for the integer transform and quantization in H.264 video coder, we can derive a sufficient threshold under which each quantized coefficient becomes zero. In addition, in order to reduce the complexity of the fast video encoding, complexity is improved, leading to improvement of total encoding time saving for given threshold. The simulation results show the capability of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.7
• /
• pp.565-573
• /
• 1990

In this paper, optimum bandwidth at BbT=0.25 was simulated uisng the formular of S.Elnoubi, who analyzed effect of receiving bandpass filter of discriminator type GMSK modem under static and fast Rayleigh fading channel which is applicable to land mobile channel environment, and measured with experimental system. The experimental results were well agreed with the simulation. The result shows that filter bandwidth is optimal at BrT=0.7 under static fading(fDT=0), while the performance is less sensitive to the bandwidth as Eb/No and fading rate fDT bacome higher.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.513-518
• /
• 2012

In this paper, we proposed a method of fast track merging which is the foundation of track to track association technique. The existing method of track merging is performed throughout comparison between tracks to tracks. Therefore, it has heavy calculation time. In our research, we developed a method for fast clustering by using nearest neighbor measurement identification. The simulation results show that the proposed method is more faster than previous method about 3.3%. We expect that this method could be effectively used in multi-target tracking particularly in heavy clutter environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.143-157
• /
• 1994

This paper is concerned with the position control of electrohydraulic servo system under parameter variation. An adaptive sliding mode control which uses the direct parameter estimation scheme, is proposed to design a robust controller for fast and accurate control of the system. It is shown that the adaptive sliding mode control algorithm is robust and effective in attaining fast and accurate position control of system under time-dependent parameter variation. It is also shown experimentally that chattering phenomena in a sliding mode control can significantly be reduced by using boundary layer technique, and that new approach in sliding mode control introducing a term proportional to the distance between the current state and the sliding surface in the control law is effective to obtain fast response and to increase stability of the system. Computer simulation on the dynamic performance of the control system is also presented.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.177-184
• /
• 2006

Since well-known explicit methods for cloth simulation were regarded unstable for large time steps or stiff springs, implicit methods have been proposed to achieve the stability. Large time step makes the simulation fast, and large stiffness enables a less elastic cloth property. Also, there have been efforts to devise so-called semi-implicit methods to achieve the stability and the speed together. In this paper we improve Kang's method (Kang and Cho 2002), and thus devise a scalable method for cloth simulation that varies from an almost explicit to a full implicit method. It is almost as fast as explicit methods and, more importantly, almost as stable as implicit methods allowing large time steps and stiff springs. Furthermore, it has a less artificial damping than the previously proposed semi-implicit methods.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.406-418
• /
• 2020

In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2009

Recently, some frequency domain CMA (Constant Modulus Algorithm) have been introduced in an effort to reduce computational complexities [1,2]. In [1], a fast algorithm that minimizing cost function designed for block input signal is employed, while in [2], a novel cost function that minimizing sample by sample input is used. Although, the two fast algorithm save computational complexities as compared to CMA, the convergence behaviors of the two fast algorithm show different results with repsect to CMA. Thus, in this paper, some analytical results on the error surface of the fast frequency domain CMA are introduced. From the analytical results, we show that the more recent algorithm [2] outperforms the previous algorithm [1]. Simulation results reveals that the recent algorithm [2] shows 50% enhanced convergence with respect to the old fast algorithm [1]. Also, we show that the recent fast algorithm [2] has comparable convergence performance with respect to conventional CMA algorithm.