• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.174-179
• /
• 2008

The measurement dissolution sensor system using GMR-SV device with magnetic sensitivity of 0.8 %/Oe and Mg-film thick of 200 nm and Mg-foil thick of 50 mm was fabricated and characterized. During the water dissolving process of Mg-film and Mg-foil, the subtle variation of magnetic field by the decrease of current in solenoid was detected by the GMR-SV sensor. The variations of Mg bubble number and ORP as a function of time for three different kinds of edible, tap, and distilled water, are measured and compared. A After 45 min, the speed of fast dissolving Mg was shown the order of edible > tap > DI water. The variation of output magnetoresistance as a function of dissolved time of Mg-film and Mg-foil for edible water, which is composed of mineral content of $0.8{\sim}5.4\;mg/l$ was investigated. The response times for the dissolution in edible water were 5 min and 20 min, respectively. From the measurement of dissolving time and speed for Mg-film and Mg-foil using GMR-SV device, the mineral Mg sensor system in edible water can be possible to develop.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.22 no.1
• /
• pp.22-29
• /
• 2013

In general, to conduct aesthetic restorations, various analyses are carried out using a camera from the initial examination with the final prosthesis in consideration. With the reality that many dentists are using digital cameras, it can be considered that the time of digital impression has already started. Just as the recent general trend is that more and more internationally renowned photographers are switching their film cameras to digital counterparts, it is likely that CAD/CAM will show another direction in the area of the aesthetic dentistry that we may want to pursue. With the word 'digital', the convenience and economics often come to mind in the first place. However, from the dental clinical viewpoint, it is important to improve and develop the CAD/CAM system based on understanding its specialty and superiority while respecting the conventional analog techniques. However, a regretful aspect is that it is often difficult to catch up with the latest advancements for proper referencing and follow-up of digital technologies since the CAD/CAM device and material are developing very rapidly. Accordingly, although it is ideal to have hands-on experiences in various digital material and devices, and adapt to their fast changes, it must be stressed that the clinical application is to be implemented on the basis of the proven traditional way of dental clinics in order to obtain better outcomes. This presentation will explore types of approaches that can be made by combining the traditional techniques and the CAD/CAM from the aesthetic viewpoint. In addition, it is hoped and eagerly awaited that the CAD/CAM restoration may play a significant role in the field of the 'digital art'.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.12-20
• /
• 2018

Efforts have been made to reconstruct low-resolution underwater images to high-resolution ones by using the image SR (Super-Resolution) method, all to improve efficiency when acquiring side-scan sonar images. As side-scan sonar images are similar with the optical images with respect to exploiting 2-dimensional signals, conventional image restoration methods for optical images can be considered as a solution. One of the most typical super-resolution methods for optical image is a sparse coding and there are studies for verifying applicability of sparse coding method for underwater images by analyzing sparsity of underwater images. Sparse coding is a method that obtains recovered signal from input signal by linear combination of dictionary and sparse coefficients. However, it requires huge computational load to accurately estimate sparse coefficients. In this study, a sparse coding based underwater image super-resolution method is applied while a selective reconstruction method for object region is suggested to reduce the processing time. For this method, this paper proposes an edge detection and object and non object region classification method for underwater images and combine it with sparse coding based image super-resolution method. Effectiveness of the proposed method is verified by reducing the processing time for image reconstruction over 32 % while preserving same level of PSNR (Peak Signal-to-Noise Ratio) compared with conventional method.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.125-130
• /
• 2015

Specific techniques and materials in conservation of traditional lacquer has not been transmitted. This study aims to compare the basic characteristics of the filler which used in the base layer of lacquer conservation. Tohoe(a mixture of lacquer and Clay) and the three kinds of additives which is mixed with Tohoe and Goksu(a mixture of lacquer, wood powder and rice starch) are estimated in drying rate, impact resistance, abrasion. Among those samples, the more amount of clay causes fast dryness speed and worse cracks on the surface. The impact resistance is weakened at high amount of clay. There is no significant differences of impact resistance between both additives that is mixed with the samples and additives. The samples that are mixed with Goksu and additives show high impact resistance. In the polishing test, the more amount of filling powders show higher grinding degree and the sample that are mixed with wood powder and charcoal show higher degree as well. The highest grinding degree is Maekchil and Goksu but the lowest one is the sample of the rooftile powder mixture.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.23-31
• /
• 2007

Fast bridge construction has been increasingly needed according to the changed construction environment. This paper deals with quasi-static tests on precast piers for bridge substructures. One of the most crucial aspect of the design of precast prestressed concrete bridge piers is the seismic performance. Seven precast pier elements were fabricated. The amount of prestressing bars, the prestressing force, and the location and number of the joint between segments were the main test parameters. Test results showed that the introduced axial prestress made the restoration of the deformation under small lateral displacement and minor damage. However, there was no effect of the prestress when the plastic hinge region was damaged severely due to large lateral displacement. Judging from the observed damage, the design of the joints in precast piers should be done for the first joint between the foundation and the pier segment. The amount of the necessary prestressing steel may be designed to satisfy the P-M diagram according to the service loads, not by having the same steel ratio as normal RC bridge piers. In order to satisfy the current required displacement ductility, it is necessary to have the same amount of the transverse reinforcements as RC piers. As the steel ratio increases, the energy absorption capacity increases. The number of joints showed a little influence on the energy absorption capacity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.403-408
• /
• 2005

Ankylosis is defined as a fusion of cementum or dentine with alveolar bone. Due to the loss of the periodontal ligament on the ankylotic area, the tooth is incapable of continued eruption and hence is unable to follow the normal vertical development of the neighboring teeth and alveolar process. A 6-year-old female was referred to the Dept. of Pediatric Dentistry for ankylosis of primary molars and congenital missing of permanent premolars on both jaws. She had neither specific past medical history nor trauma and infection history in oral and maxillofacial region. Radiographic finding is that the maxillary primary molars were the early onset of ankylosis and had fast root resorption rate. However the mandibular primary molars were ankylosed later and being resorbed slower than maxillary primary molars. The object of treating this case is to maintain the proper alveolar bone growth and retention of deciduous molars. The point of managing this case is as follows: Proper treatment (observation, restoration, or extraction) should be established after thorough consideration of the time of onset, the root resorption rate, progression of infraocclusion and the development of alveolar bone support. We should consider the timing of extraction of the ankylosed teeth without problem of neighbouring alveolar bone growth and tilting of adjacent teeth in the view of growth spurt. Early diagnosis is important to avoid many of the complications with infraoccluded primary molars.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.339-349
• /
• 1999

The dental structure substituted by restorative materials may produce discomfort resulting from hot or cold stimuli. To investigate the effects of this stimuli on the human teeth, thermal analysis was carried out by calculation of general heat conduction equation in a modeled tooth using numerical method. The method has been applied to axisymmetric and two-dimensional model, analyzing the effects of constant temperature $4^{\circ}C\;and\;60^{\circ}C$. That thermal shock was provided for 2 seconds and 4 seconds, respectively and recovered to normal condition of $20^{\circ}C$ until 10 seconds. The thermal behavior of tooth covered with a crown of gold or stainless steel was compared with that of tooth without crown. At the same time, the effects of restorative materials(amalgam, gold and zinc oxide-eugenol(ZOE)) on the temperature of PDJ(pulpo-dentinal junction) has been studied. The geometry used for thermal analysis so far has been limited to two-dimensional as well as axisymmetric tooth models. But the general restorative tooth forms a cross shaped cavity which is no longer two-dimensional and axisymmetric. Therefore, in this study, the three-dimensional model was developed to investigate the effect of shape and size of cavity. This three-dimensional model might be used for further research to investigate the effects of restorative materials and cavity design on the thermal behavior of the real shaped tooth. The results were as follows; 1. When cold temperature of $4^{\circ}C$ was applied to the surface of the restored teeth with amalgam for 2 seconds and recovered to ambient temperature of $20^{\circ}C$, the PDJ temperature decreased rapidly to $29^{\circ}C$ until 3 seconds and reached to $25^{\circ}C$ after 9 seconds. This temperature decreased rather slowly with stainless steel crown, but kept similar temperature within $1^{\circ}C$ differences. Using the gold as a restorative material, the PDJ temperature decreased very fast due to the high thermal conductivity and reached near to $25^{\circ}C$ but the temperature after 9 seconds was similar to that in the teeth without crown. The effects of coldness could be attenuated with the ZOE situated under the cavity. The low thermal conductivity caused a delay in temperature decrease and keeps $4^{\circ}C$ higher than the temperature of other conditions after 9 seconds. 2. The elapse time of cold stimuli was increased also until 4 seconds and recovered to $20^{\circ}C$ after 4 seconds to 9 seconds. The temperature after 9 seconds was about $2-3^{\circ}C$ lower than the temperature of 2 seconds stimuli, but in case of gold restoration, the high thermal conductivity of gold caused the minimum temperature of $21^{\circ}C$ after 5 seconds and got warm to $23^{\circ}C$ after 9 seconds. 3. The effects of hot stimuli was also investigated with the temperature of $60^{\circ}C$. For 2 seconds stimuli, the temperature increased to $40^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 3 seconds of stimuli and decreased to $30^{\circ}C$ after 9 seconds in the teeth without crown. This temperature was sensitive to surface temperature in the teeth with gold restoration. It increased rapidly to $41^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 2 seconds and decreased to $28^{\circ}C$ after 9 seconds, which showed $13^{\circ}C$ temperature variations for 9 seconds upon the surface temperature. This temperature variations were only in the range of $5^{\circ}C$ by using ZOE in the bottom of cavity and showed maximum temperature of $37^{\circ}C$ after 3 seconds of stimuli.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.285-320
• /
• 2020

This study aims to examine the processes of changes of the two main roles, Sangjwa(the young Buddist monk) chum and Omjung(the monk with a boil on his face) chum, performed in Yangju Byeolsandae Nori, on the basis of Chumsawi (dance-movement). Above all, having studied many artistic remains performed by Jo jong sun, Jung han gyu, Park jun seup, Kim sung tae from 1929 to 1942, two main roles, in which Geodeureum chum is now an essential part in almost all performances, were then played only in Kkaekki chum to Taryong Jangdan without performances of Geodeureum chum. In case of Sangjwa chum, players had performed ad libitum and without restraint only on the basis of five sorts of Kkaekki chum's movements. In Omjung chum, witty remarks along with the drama had become more important factors than dances. Let alone two main roles, other parts then also showed no big changes in dance performance. Performers just tried to maintain its slender existence within stifling atmosphere because of oppressions and restraints during the Japanese imperialism. After the restoration of independence in 1945, Kim sung tae and his disciples made a great effort on the restoration of Talnori. During the Korean war, many players also endeavored to keep a good track of Talnori, teaching and training their young followers. Especially performers such as Park jun seup, Park sang hwan, Kim sung tae, and Lee jang sun put much more efforts on restoring Talnori. From that time, Geodeureum chum began to appear in two main roles' performances. In Sangjwa's performances, Byeogsa ritual dance, which was performed to Taryong Jangdan, changed into performances to Yeombul Jangdan, and Kkaekki chum -originally slow and ritual dance, became very fast and active one. Geodeureum chum, called Yongteulim, was added in Omjung chum, so that dance had more important role in performance. Even at this time, dance movements were not clearly and completely organized and arranged, because Geodeureum chum's performance was not clearly defined as orderly dance movements but was regarded as just a movement. After Geodeureum chum being designated as a cultural treasure, Lee byeong kwon took over the task from Park sang hwan, Sangjwa chum's performer, so Geodeureum chum became much more well organzied, arranged and orderly. Geodeureum chum played by Sangjwa had almost the same order of scenes and movements as Geodeureum chum played by Yeonnip. Based on this performance, the order of dances and movements was consistently arranged and settled. Following Park jun seup's performances, Jangsam was more widely applied and used in Omjung chum than ever before, so Omjung chum became much more organized and arranged. Well-arranged Omjung chum had also almost the same dances and movements as Nojang chum's. Yeonnip and Nojang's performances were not directly and intentionally studied and applied to two main roles in Yangju Byeolsandae Nori. Players seemed to borrow those parts naturally through many times of performances. Through their persistent efforts, Jangdan and dance movements have more clearly and completely been organized, establied, and improved through many years' performances. And dance movement can be performed exactly to Jangdan, so we have more complete and orderly types of dance movements. Thanks to many performers' efforts, Sangjwa chum has been established as one that only top performer can play, and Omjung chum has become an integral part in Yangju Byeolsandae Nori.

• Korean Journal of Environmental Biology
• /
• v.32 no.2
• /
• pp.138-152
• /
• 2014

The objective of the study survey was to determine the effect of marine sand extraction on community composition and rate of recolonization of the meiobenthos following cessation of mining activities. Because of meiobenthic distribution in nature, high abundance, intimate association with sediments, fast reproduction, benthic larva period, sensitivity to pollution and rapid life histories, meiobenthos are widely regarded as ideal organisms to study the potential ecological indicator of natural and anthropogenic stresses. The community structure of meiobenthos was studied at seven stations within sandy tidal and sub tidal zones in Jangbongdo in the Yellow Sea, Korea from Aug. 2006 to Dec. 2007. Meiobenthic samples were collected by three core samples, with a 3.6 cm in diameter, from each sediment sample taken with a Smith-McIntyre Grab. It was found that sand mining often causes complete removal of the sediment and the damage to the habitats of meiobenthos. This study in the effect showed that sand mining resulted in a reduction in total abundance and biomass of meiobenthos in mining area. The finding of this study further showed that initial restoration of abundance and biomass within one year of the cessation of sand mining.