• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1703-1707
• /
• 2013

A fast and simple sampling and sample preparation device, (NTD) has been developed and applied to sample and analyze volatile components from ground coffee beans. Coffee fragrances and other volatile organic compounds (VOCs) were sampled by the NTD and then analyzed by gas chromatograph-mass spectrometry (GC/MS). Divinylbenzene (DVB) particles (80/100 mesh size) were the sorbent bed of the NTD. More than 150 volatile components were first identified based on the database of the mass library and then finally 30 fragrances including caffeine were further confirmed by comparing experimental retention indices (i.e. Kovat index) with literature retention indices. Total sampling time was 10 minutes and no extra solvent extraction and/or reconstitution step need. Straight n-alkanes (C6-C20) were used as retention index probes for the calculation of experimental retention indices. In addition, this report suggests that an empty needle can be an alternative platform for analyzing polymers by pyrolysis-GC/MS.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.122-130
• /
• 2004

Crude oil is complex mixture of thousands of different organic compound formed from a variety of organic materials that are chemically converted under differing geological conditions over long periods of time. Also oil composition varies according to crude source, refining, processing, handling and storage. The oil fingerprint method is application of specific knowledge of petrochemicals and use of sophisticated analytical equipment and techniques to identify the source(s) of oil pollution. KNMPA currently utilizes three primary analytical techniques: Gas Chromatography (GC), Fluorescence Spectroscopy(FL) and Infrared Spectroscopy(IR). Of all these techniques, GC technique are most widely used. Gas Chromatography is used as a primary analytical method because high reliableness, high separating efficiency and repeatability, but it is timeconsumable. The study results of identification of waterborne spilled oil by Fast Gas Chromatograph method showed that analytical time is cut down to 30minutes in comparison with packed column method and chromatograms represent high resolution and high repeatability.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.432-441
• /
• 2001

An automated on-line portable preconcentration-short column gas chromatograph was developed, which used preconcentrator using adsorption tube with Tenax-GR and Curie-point heating. The developed system operated with 3 steps of processing, preconcentration, thermal desorption, and analysis and cleaning, and could continued operating within 1~2 min cycle. The recoveries of preconcentrator for toluene was ranged between $94.7{\pm}6.6%$ and $103.8{\pm}3.1%$ with less than 7% of RSD. For benzene, toluene and xylene(BTX) standard gas test, IDL was 41, 49, $472ng/m^3$ benzene, toluene and o-xylene, respectively. The BTX mixture was analyzed within 30 sec with baseline separation by the system equipped with 4 m long capillary column. The deficiency of separation power caused by short column was solved by the control of sample injection volume and inlet/outlet pressure ratio. The automated portable preconcentration-short column gas chromatograph system was found to be useful for the continuous air monitoring of BTX at ppb levels in ambient air.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2197-2204
• /
• 2005

The combination of Gas chromatography (GC) for separation and Flame Ionization Detection (FID) for detection and identification of the components of a mixture of compounds is a fast and strongly proved method of analytic chemistry. The objective of this research was to design a combined High-speed miniature screening Gas chromatograph along with a Flame Ionization Detector for quick, quantitative and qualitative analysis of gas components. This combined GC-FID system is suitable to detect the volatile and semi-volatile hydrocarbons present in a gas mixture. The construction made it less expensive, easy to use and movable. The complete gas path was developed. On/off valves, temperature and flow sensors and their interface electronics were used for controlling purpose. A Microcontroller was programmed to measure the temperature and gas flow using the sensors and to control and regulate them using the electronics and valves. A pocket PC with its touch screen served as a user interface for the system. Software was developed for the pocket PC, which makes the communication possible with the Microcontroller. The system parameters can be indicated in the Pocket PC as simple text and also the analysis result can be displayed.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.237-242
• /
• 2005

This experiment was carried out to develop the fast and simple method for pesticide residue analysis by using solvent free solid injector (SFSI) and to validate the efficiency of the method developed for the residue analysis of the endocrine disruptor-like pesticides such as endosulfan, metribuzin, trifluralin and vinclozolin. The samples after freeze drying were sealed in glass capillary tubes and then introduced into the heated injector of gas chromatogaphy. The required pre-heating times were 1 min for endosulfan and trifluralin, 5 min for vinclozolin, and 10 min for metribuzin. The detection limits of endosulfan in chinese cabbages, metribuzin in lettuces, trifluralin in spinachs and vinclozolin in hot peppers were 0.05, 0.1, 0.05 and 0.05 ng, respectively and their recoveries were ranged from 74%, $98{\sim}107%$, $86{\sim}95%$ and $94{\sim}95%$, respectively. The detected level of metribuzine residue in field lettuce samples by using the SFSI was 0.6 ng/mg.