• International Journal of High-Rise Buildings
• /
• v.1 no.4
• /
• pp.311-332
• /
• 2012

Earthquake response of mid-rise to high-rise buildings provided with friction dampers is investigated. The steel buildings are modelled as shear-type structures and the investigation involved modelling of the structures of varying heights ranging from five storeys to twenty storeys, in steps of five storeys, subjected to real earthquake ground motions. Three basic types of structures considered in the study are: moment resisting frame (MRF), braced frame (BF), and friction damper frame (FDF). Mathematical modelling of the friction dampers involved simulation of the two distinct phases namely, the stick phase and the slip phase. Dynamic time history analyses are carried out to study the variation of the top floor acceleration, top floor displacement, storey shear, and base-shear. Further, energy plots are obtained to investigate the energy dissipation by the friction dampers. It is seen that substantial earthquake response reduction is achieved with the provision of the friction dampers in the mid-rise and high-rise buildings. The provision of the friction dampers always reduces the base-shear. It is also seen from the fast Fourier transform (FFT) of the top floor acceleration that there is substantial reduction in the peak response; however, the higher frequency content in the response has increased. For the structures considered, the top floor displacements are lesser in the FDF than in the MRF; however, the top floor displacements are marginally larger in the FDF than in the BF.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.103-110
• /
• 2008

In this paper, an efficient butterfly structure for 8K/2K-Point Radix-4 FFT algorithm using CORDIC(coordinate rotation digital computer) is proposed. It is shown that CORDIC can be efficiently used in twiddle factor calculation of the Radix-4 FFT algorithm. The Verilog-HDL coding results for the proposed CORDIC butterfly structure show 36.9% cell area reduction comparison with those of the conventional multiplier butterfly structure. Furthermore, the 8K/2K-point Radix-4 pipeline structure using the proposed butterfly and delay commutators is compared with other conventional structures. Implementation coding results show 11.6% cell area reduction. Due to its efficient processing scheme, the proposed FFT structure can be widely used in large size of FFT like OFDM Modem.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.1
• /
• pp.26-30
• /
• 2009

STATEMENT OF PROBLEM. Qualitative and semi-quantitative methods have been developed for TMJ sound classification, but the criteria presented are completely inhomogeneous. Thus, to develop more objective criteria for defining TMJ sounds, electroacoustical systems have been developed. We used Joint vibration analysis in the BioPAK system(Bioresearch Inc., Milwaukee, USA) as the electrovibratography. PURPOSE. The aim of this study was to examine the TMJ sounds with repect to frequency spectra patterns and the integral > 300 Hz /< 300 Hz ratios via six-months follow-up. MATERIAL AND METHODS. This study was done before and after the six-months recordings with 20 dental school students showed anterior disk displacement with reduction. Joint vibrations were analyzed using a mathematical technique known as the Fast Fourier Transform. RESULTS. In this study Group I and Group II showed varied integral > 300 /< 300 ratios before and after the six-months recordings. Also, by the comparative study between the integral > 300 /< 300 ratios and the frequency spectrums, it was conceivable that the frequency spectrums showed similar patterns at the same location that the joint sound occurred before and after the six-months recordings. while the frequency spectrums showed varied patterns at the different locations that the joint sound occurred before and after six-month recordings, it would possibly be due to the differences in the degree of internal derangement and/or in the shape of the disc. CONCLUSIONS. It is suggested that clinicians consider the integral > 300 /< 300 ratios as well as the frequency spectrums to decide the starting-point of the treatment for TMJ sounds.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.4
• /
• pp.74-84
• /
• 1997

최근. 급격한 도시화 현상으로 인한 불투성 지표의 증가는 도시의 생태적 측면에 변화를 일으키고 있으며, 도시의 온난화 현상. 도시의 사막화 현상 등이 그 결과로 나타나고 있다. 특히, 분투수성 지표가 많은 도시에서는 그 수문학적 기능이 투수성 지표에 의존하고 있으며, 도시의 투수성 지표에는 오픈 스페이스와 주변의 생산녹지 등이 있다 이러한 관점에서 투수성 지표에 관한 연구가 필요함에도 불구하고 많지 않았고, 대부분 포인트별 연구였다. 본 연구는 도시 내의 수문기능 환경변화개선에 관한 기초자료로 동경의 대표적 도시공원인 코카네이 (소금정) 공원과 동경 근교의 치바현 (천엽현)위치한 치바(천엽)대학 부속 카시와 (상) 농장을 대상지로 선정 토양환경기능의 간접적 지표가 되는 토양경도를 나카야마식(산중식) 토양경도 계륵 사용하여 5120 Cm의 라인위에 10 Cm간격으로 512개씩 코카네이(소금정) 공원에서 9라인. 카시와(상) 농장에서 7라인을 공간별로 측정하고. 그 측정값을 다중비교검정과 Bartlett's 검정에 의하여 검정후에, 랜덤 데이타분석에 적합한 FFT(Fast Fourier Transform)를 사용하여 분석하였다 본 연구의 측정값을 다중비교검정과 Bartlett's 검정한 결과, 유의타가 없었고, 각 데이터를 분석한 결과. 공원의 9라인과 농장의 7라인은 분석 그래프의 유형에 의해 각각 2가지로 분류되었고, 전체적으로는 3가지로 분류할 수 있었다 특히 공원과 농장의 분석 그래프에서는 수평 방향으로의 변화에 대한 수직방향의 변화가 비슷한 스펙트럼이 공통적으로 나타났고. 각각 최대 값은 다르나 제1주기 부분에서는 답압과 같은 인위적인 요인에 의한 논은 수직방향의 스펙트럼 변화가 관찰되었다. 또한, 강우가 녹지의 경도변화에 미치는 가를 관찰하기 위하여 강우전과 강우후에 같은 라인(Line1과 Line2)을 측정하여 분석한 결과, 측정값의 평균에서는 차이를 보였으나. 주기의 변화는 거의 없었다. 전체적으로 분석 그래프에서는 공간별로 스펙트럼의 수평방향에 대한 수직방향의 변화량의 차이는 보였으나 비슷한 주기를 나타냈고, 가작의 유형은 공원의 녹지공간(lawn-area)과 나지공간(bare-area)으로, 농장을 녹지공간(lawn-area)과 경작공간(field-area)으로 분류할 수있었다. 종합적으로 녹지를 지질학적 구조의 고유한 특징이 아닌. 답압 등과 같은 인위적인 요인에 따른 속성들에 의하여 나타나는 스펙트럼의 분석을 통하여 녹지공간(lawn-area). 나지공간(bare-area)그리고, 경작공간(field-area)으로 분류할 수 있었다..

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.229-234
• /
• 2006

Acquisition is to detect the presence of the GPS signal. Once the signal is detected, the estimated frequency and code phase are passed to a tracking loop to demodulate the navigation data. In order to detect the weak signal, multiple length of data integration is always needed. In this paper, we present five different acquisition approaches based on circular correlation and Fast Fourier Transform (FFT), using coherent as well as non-coherent integration techniques for the multiple length of collected GPS satellite signal. Moreover a general approach of determining the acquisition threshold is introduced based on noise distribution which has been proved effective, and independent of the hardware. In the end of this paper, the processing speed and acquisition gain of each method are illustrated, compared, and analyzed. The results show that coherent approach is much more time consuming compared to noncoherent approaches, and in the case of multiple length of data integration from 2ms to 8ms, the processing times consumed by the fastest non-coherent acquisition method are only 25.87% to 1.52% in a single search, and 34.76% to 1.06% in a global search of those in the coherent acquisition. However, coherent acquisition also demonstrates its better performance in the acquisition gain, and in the case of 8ms of data integration it is 4.23 to 4.41 dB higher than that in the non-coherent approaches. Finally, an applicable scheme of combining coherent and non-coherent acquisition approaches in the development of a real-time Software GPS receiver in the University of Tokyo is provided.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1790-1795
• /
• 2013

The current velocity and turbulence information in each range cell can be obtained from the first and second Doppler spectrum moment estimates. However, the very widely used correlation method often called as the pulse-pair method has the inherent restrictions under the highly turbulent conditions since it does not satisfy the assumptions that the return Doppler spectrum should be symmetric and have a single peak value. Therefore, in this paper, the quality of pulse-pair estimates were compared with that of FFT estimates for problem analysis using various shapes of simulated Doppler spectra. It can be known that the pulse-pair method often yields meaningless results if the received signals are severely biased or multi-peak Doppler spectra in the Doppler frequency domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.344-355
• /
• 2008

In this paper, we are dealing with the problems of performance evaluation of Differentiated Services(DiffServ) networks. For successful performance evaluation, the ability to accurately represent "real" traffic on the network by suitable traffic models is an essential ingredient. Many research results on the nature of real traffic measurements demonstrated LRD(long-range dependence) property for the Internet traffic including Web, TELNET, and P2P traffic. The LRD can be effectively represented by self-similarity. In this paper, we design and implement self-similar traffic generator using the aggregated On/Off source model, based on the analysis of the On-Off source model, FFT-FGN(Fast Fourier Transform-Fractional Gaussian Noise) model, and RMD(Random Midpoint Displacement) model. We confirmed the self-similarity of our generated traffic by checking the packet inter-arrival time of TCPdump data. Further we applied the implemented traffic generator to the performance evaluation of DiffServ networks and observed the effect of performance to the a value of the On/Off model, and performance of EF/BE class traffic by CBQ.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2016

A new algorithm for determining optimal accelerometer locations is proposed by using a frequency-domain Hankel matrix which is much simpler to construct than a time-domain Hankel matrix. The algorithm was examined through simulation studies by comparing the outcomes with those from other available methods. To compare and analyze the results from different methods, a dynamic analysis was carried out under seismic excitation and acceleration data were obtained at the selected optimal sensor locations. Vibrational amplitudes at the selected sensor locations were determined and those of all the other degrees of freedom were determined by using a spline function. MAC index of each method was calculated and compared to look at which method could determine more effective locations of accelerometers. The proposed frequency-domain Hankel matrix could determine reasonable selection of accelerometer locations compared with the others.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.214-219
• /
• 2009

This paper proposes a watermarking algorithm considering the frequency characteristics of Haegeum sounds for copyright protection of digital Haegeum sound contents. The harmonics of Haegeum sounds commonly have large magnitude values in 1500Hz~2000Hz and 2800Hz~3500Hz so that those bands are selected to embed a watermark. The proposed method computes the FFT (fast Fourier transform) of the original sound signal and embeds the watermark bits generated by PN (pseudo noise) sequence into the harmonics in the selected bands. Furthermore, the proposed method is robust to lowpass filter, bandpass filter, cropping, noise addition, MP3 compression attacks and the maximum BER (bit error rate) is 1.41% after lowpass filter attack. To measure the quality of the watermarked sound, subjective listening test, MUSHRA (multiple stimuli with hidden reference and anchor), was conducted. The mean value of MUSHRA listening test is bigger than 98 and 96.67 for every Haegeum sounds and Korean classical music with Haeguem, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.359-369
• /
• 2003

We present efficient generalized algorithms for all-to-all personalized communication operations in a 2D torus. All-to-all personalized communication, or complete exchange, is at the heart of numerous applications, such as matrix transposition, Fast Fourier Transform(FFT), and distributed table lookup. Some algorithms have been Presented when the number of nodes is power-of-2 or multiple-of-four form, but there has been no result for general cases yet. We first present complete exchange algorithm called multiple-Hop-2D when the number of nodes is in the form of multiple-of-two. Then by extending this algorithm, we present two algorithms for an arbitrary number of nodes. Split-and-Merge algorithm first splits the whole network into zones. After each zone performs complete exchange, merge is applied to finish the desired complete exchange. By handling extra steps in Double-Hop-2D algorithm, Modified Double-Hop-2D algorithm performs complete exchange operation for general cases. Finally, we compare the required start-up time for these algorithms.