• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.132-138
• /
• 2006

A tape feeder is an important part to supply a micro chip such as 1005 and 0603 components in SMT process. Traditional sprocket wheel type feeder has several problems such as backlash and indexing errors, low compatibility and confidence. However, it is very difficult to solve such problems due to the inevitable fraction defectives of sprocket wheel. Thus, the object of this works is to develop a linear type high precision tape feeding system using cam-slider mechanism. The proposed cam-slider mechanism is composed of several links and a plate, pneumatic actuator is used to generate linear motion. The proposed mechanism has distinct advantages over the conventional mechanism. It has reduced feeding errors, long lift-cycle, and slim width. As a result, the developed tape feeder using cam-slider mechanism shows special characteristics far high precision feeding for chip-mounters.

• 천문학회보
• /
• 제41권1호
• /
• pp.70.3-70.3
• /
• 2016

Active galactic nuclei (AGNs) typically show a non-thermal continuum locally represented by a power-law and many prominent emission lines in the UV and optical regions. AGNs are classified by two types, where Type I AGNs exhibit both broad and narrow lines and only narrow lines are observed in Type 2 AGNs. The unification models of AGNs invoke the existence of a molecular torus just outside of the broad line region. In the presence of a high column HI region associated with the molecular torus, we propose that significant fraction of broad line photons near Lyman series can be scattered by atomic hydrogen in the torus. In particular, $Ly{\alpha}$ being the strongest emission line, strong linear polarization may develop around $Ly{\alpha}$ through Rayleigh scattering. We adopt a Monte Carlo technique to investigate the polarized transfer of $Ly{\alpha}$ in a thick HI region with the shape of a torus. We consider the range of HI column density N_HI = 1020-23 with fixed geometric parameters of the torus such as the inner and outer radii and the height. We present the polarized spectra and angular distribution of Rayleigh scattered radiation around $Ly{\alpha}$. We find that the $Ly{\alpha}$ core part is polarized in the direction perpendicular to the symmetry axis whereas in the far wing part it is polarized in the parallel direction. It is concluded that the unification of AGNs implies that $Ly{\alpha}$ can be uniquely polarized through Rayleigh scattering.

• Parasites, Hosts and Diseases
• /
• 제55권4호
• /
• pp.385-389
• /
• 2017

Seroprevalence of Toxoplasma gondii infection among the residents of Cheorwon-gun, Gangwon-do, Korea, which partly includes the demilitarized zone (DMZ), were surveyed for 4 years and evaluated by RDT using recombinant fragment of major surface antigen (SAG1A). Sera from 1336, 583, 526, and 583 adult residents were collected on a yearly basis from 2010 to 2013, respectively. The total positive seroprevalence was 19.3, 21.9, 23.4, and 26.8% from 2010 to 2013, respectively. The positive seroprevalence in men (23.6, 27.5, 29.5, 34.6%) was far higher than women (14.1, 18.3, 19.4, 21.4%), from 2010 to 2013, respectively. This high seroprevalence of toxoplasmosis in Cheorwon-gun may have been influenced in part by its geographical locality of the area as it includes the DMZ, where civilian access is strictly limited, thus creating a relatively isolated area that is a well-preserved habitat. Further research is necessary to study the epidemiology of toxoplasmosis in this area.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.571-583
• /
• 2017

A kind of accordion-web RBS connection, "Tubular Web RBS (TW-RBS)" connection is proposed in this research. TW-RBS is made by replacing a part of web with a tube at the desirable location of the beam plastic hinge. This paper presents first a numerical study under cyclic load using ABAQUS finite element software. A test specimen is used for calibration and comparison of numerical results. Obtained results indicated that TW-RBS would reduce contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Furthermore, the tubular web like corrugated sheet can improve both the out-of-plane stiffness of the beam longitudinal axis and the flange stability condition due to the smaller width to thickness ratio of the beam flange in the plastic hinge region. Thus, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam as just local buckling of the beam flange at the center of the reduced section was observed during the tests. Also change of direction of strain in arc shape of the tubular web section is smaller than the accordion webs with sharp corners therefore the tubular web provides a better condition in terms of low-cycle fatigue than other accordion web with sharp corners.

• 한국응용곤충학회지
• /
• 제19권2호
• /
• pp.113-124
• /
• 1980

한국 동굴거미 연구의 기저로서 지금까지의 연구경과의 개요와 조사동굴 및 확인된 동굴거미의 목록을 수록하였다. 1) 한국산 동굴거미에 대한 연구는 1961년 11월에 시작되어 약 20년이 경과한 바, 기간 39편의 논문이 10명의 저자에 의해 발표되었고, 15과 27속 29종이 보고되었으며, 16종의 신종이 기재되었으나 본격적인 조사연구는 이제부터라고 하겠다. 2) 조사된 동굴은 석탄암동굴이 121개, 용암동굴이 33개이며 이들에 대한 정확한 명칭과 소재지를 밝혀두었다. 3) 현재까지의 한국산 동굴거미로 확인된 23과 80속 85종과 독립종이 확실시되어 그 속명만을 수록한 13미확정종의 목록을 밝혔다. 아직 연구 정리되지 못한 Leptonetidae, Nesticidae, Cybaeinae, Erigonidae 중에는 분류학적이나 생태학적면에서 중요한 것들이 많이 남아 있다. 4) 해외 동굴거미와 공통되는 것은 일본산과의 25종 서구산과의 2종이 있으며 이들의 대부분은 외래성의 것이고, 진동굴성의 것은 전혀 없었다.

• Journal of Korea Trade
• /
• 제23권6호
• /
• pp.1-13
• /
• 2019

Purpose - This study deals with a strategic plan for meeting the value added criteria effectively, which is one of the methods of determining origin used in preferential trade such as FTA. Automobile products, one of the major Korean export items, were selected to give a practical use against the FTA requirements. Design/methodology - This study is based on the value-added criteria of the Korea-US and Korea-EU FTAs that apply various value-added criteria. The Korea-US FTA adopts the RVC method based on the integration, deduction and net cost methods, while the MC method is employed in the Korea-EU FTA. The methodology used in this work is an extended literature review, analysis of the value-added criteria applied to automobile products under Korea-US and Korea-EU FTA with some secondary statistics. Findings - Based on in - depth analysis of the value - added criteria requirements for automobile products stipulated in the Korea - US FTA and the Korea - EU FTA, two strategic considerations are suggested. First is 'appropriate value-added strategy' and the second is 'strategy of changing production and trade structure'. The second strategy is a bit used in Korea but this is not considered best if the first strategy is ignored or forgotten. The second one is meaningful when this becomes inevitable. Research limitations/implications - This study is primarily designed to assist Korean auto mobile industry players exporting to EU and USA but this may help to auto part or material producers in FTA counter party territories being EU or USA as the preferential tariffs are applied on a inter region basis. A further research other than auto mobiles using other major FTAs might be followed later. Originality/value - There has been so far little research on strategic factors to meet the value-added origin requirements. This study, therefore, is expected to contribute facilitating the decision of FTA origin and to improve the utilization of FTA by allowing exporting companies using value added criterion to more smoothly meet origin requirements. This will also enable the tax authorities to utilize the value-added criterion to validate effectively the origin of imports where preferential tariffs are applied.

• 한국수자원학회논문집
• /
• 제51권spc1호
• /
• pp.1091-1103
• /
• 2018

한반도는 계절 및 지리적 위치에 따라 강수특성이 상이하여 수자원 관리 및 계획수립 시 홍수, 가뭄을 사전에 대비하는 것이 매우 중요하다. 더욱이 기후변화로 인한 강수 및 기온의 변화는 홍수 및 가뭄 등 수재해의 변동을 더욱 심화시킬 것으로 예상된다. 본 연구에서는 남한 5대강(한강, 낙동강, 금강, 섬진강, 영산강)을 대상으로 기후변화에 따른 우기(7~9월)와 건기(10~3월)에서의 미래 하천유량의 변화를 전망 및 분석하고자 한다. 이를 위해 CMIP5의 핵심실험인 2개 RCP 시나리오(RCP4.5, RCP8.5)를 이용하였으며, 적정 GCM (INMCM4 모형)을 선정하였다. 5대강 유역의 유량을 전망하기 위해 상세화된 기후변화 시나리오를 장기 강우-유출모형(PRMS 모형)의 입력으로 하여 유량해석을 수행하였다. 장기간의 자료를 활용하여 PRMS의 모형 매개변수를 추정하였으며, 과거기간(1976~2005년) 대비 미래 3기간(2025s, 2055s, and 2085s)에 대한 우기 및 건기시의 유량변화를 분석하였다. 평가결과, 건기에서의 유출량 감소는 RCP8.5 시나리오 대비 RCP4.5 시나리오에서 더 크게 나타났으며, RCP4.5 시나리오 하에서 2025s, 2055s 기간의 유출량은 -7.23%, -3.81% 감소하는 것으로 나타나 가까운 미래(2025s) 기간에서의 유출량 감소가 더욱 클 것으로 전망되었다. 먼 미래(2085s) 기간의 경우, 북부지역은 유량이 증가, 남부지역은 유량이 감소하는 것으로 나타났다. 한편, RCP 8.5 시나리오 하에서는 남부지역을 포함한 대부분의 지역이 가뭄에 대한 취약성이 높아지는 것으로 나타났다. 우기에서의 유출량 변화는 2개 RCP 시나리오 및 미래 전 기간에서 지역에 따라 유량이 증가(북부 및 서부지역) 또는 감소(남부)하는 것으로 나타났다.

• 미술이론과 현장
• /
• 제1호
• /
• pp.23-48
• /
• 2003

Art theorists support art productions by, introducing them to the public, explaining their meanings, and playing a crucial part in the development of art. These tasks seem like their opus. Because the principles of art production and the artistic languages are quite different from the ordinaries, we need 'interpreters' who can mediate us and the artists. Art works need interpretation. And the interpretation includes not only the characteristics of the given art work, but the customs, history, and the unique qualities of the race that produced the art work. The former director of the Korean National Museum, Choi Soon-woo wrote on the characteristics of Korean art as those that stem from the poised, arbitrary, and non-elaborate state of mind. The statement of the former Director of the National Museum has its weight far greater than just a personal opinion. In fact, we encounter the same resonance of this statement over and over reproduced in the mass media. The problem lies on that it deals with not only a single art work, but the entire Korean art. And going further, this kind of remarks are already infused into every sector of our thought on art appreciation. In this paper, I argue for a re-reading of the characteristics of Korean beauty based on two reasons. First, the characteristic of art work is contemporary, thus we cannot define the characteristics of entire Korean art in a few words without the context of the period of its making. Second, Director Choi defined the characteristics that I pointed out above as 'natural' and 'nature-friendly.' Nature or being natural is not an usual word that defines the characteristics of art work, which stands for the opposite side of the nature in the binary opposition of nature/culture. To delve into these misunderstandings of Korean beauty in the popular notions of Korean art, I suggest the re-reading of three major articles on Korean art: Ryoo Jong-yeol's "Korean race and its art," Ko You-seup's reiteration of Ryoo's thesis called "Discourses in Korean Art History and Aesthetics," and Yoon Hee-soon's antithesis of Ryoo Jong-yeol titiled "Studies on Korean Art History."

• 기술사
• /
• 제19권1호
• /
• pp.12-24
• /
• 1986

The number of visiters to Bukhan Mt. national park, generation quantity of solid waste and collection system were researched to consider a counterplan for the pollution control of the national park and study for developing the effective treatment of solid waste was tried through the proximate analysis of each component containing. Results obtained in this study were summerized as follows; The great part of visitors go on an excursion to the Bukhan Mt. national park during July and August and also, the solid waste was generated nearly a half of the total amount at the same period. The major collection facilities in the national park were waste basket and incineration box. But the incineration box was too large in volume and very far in distance, and its collection period was irregular, so it was cause to the congestion of solid waste and bad smell and dirty. Therefore, to complete collection of solid waste, we must set up the waste basket which able to find within 40～50m from the origination place of solid waste and induce the visitors to throw the solid waste. It was obtained as moisture content: 48.5 wt%, volatile solid: 28.4wt％, fixed solid: 23.1 wt％, lower heating value: 1,320kca1/kg from experimental analysis of solid waste. According to this analysis, the incineration operation is possible, but the generation quantity of solid waste was too small to construct incineration plant for heat recovery. It was found that it is suitable for the aerobic composting by mixing with the night soil which generate in the national park after the recovery of resources such as metals, glasses and plastics.

• The Korean Journal of Ecology
• /
• 제1권1호
• /
• pp.17-23
• /
• 1977

Flowering dates of 389 plant species in the Hongneung Arboretum, Seoul, had been recorded from 1968 through 1975. The thermal analysis on the air temperature as the key factor determining the first flowering date, with climatological data obtained in the Arboretum, were undertaken by Nuttonson's Index (1948) and Lindsey & Newman's Index (1956). The results and conclusion in this study are as follow; Peak in the bell shape distribution curve of the species and first flowering dates, largely, was early May. Flower spans of most species were 10 to 20 days, neverthless, some species flower only a few days while others may stay flowering a hundred days even more. Increase-curves of summation temperature from early spring through late-summer showed almost the same mode in both Nuttonson;s Index (Tn) and Lindsey & Newman's Index (T1). These Indices manifested the exponential curve, increasing slowly at the beginning of spring chiefly but rapidly from the middle part of April. The equation of the linear relationahip between Tn and Tl as far as in thisstudy is as follow. Tl=230Tn It appears that the distribution of summation temperature, below Tn=400°C·day, affects the first flowering, even though it could be modified somehow by the distribution of precipitation, day length and others. Nuttonson's Index (Tn.f) and Lindsey & Newman's Index (Tl.f) upon the thermal amount first flowering dates have been respectively simulated as follow. Tn.f=θa + C Tl.f=230θa + 230C where θ is air temperature 10°C, a and C are a constant.