• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.14-15
• /
• 2021

Recently, the size of tiles used for bathroom walls in apartment houses is gradually increasing in size. The problem is that when these large-sized tiles are attached by the sticking method, due to the nature of the method, there is a concern about the stability of the attachment to the part (pupil) where the tile and the adhesive are not attached. The problem is serious as it leads to lawsuits in the outbreak court. In addition, it is urgent to verify the adhesion stability of the sticking method because secondary damage occurs due to a safety accident caused by the falling of the tile. Ministry of Land, Infrastructure and Transport [Investigation of defects in apartment houses, calculation of repair cost and defect determination criteria] ① The tile adhesion strength is 0.39N/mm² or more and ② It is specified to fill 80% or more of the base area of the tile backside, but this is currently trendy. It is considered that large-sized tiles need to be verified from multiple angles, and as part of that, we intend to verify the adhesion stability according to the area to be attached to large-sized tiles.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.81-92
• /
• 2023

According to the 2020 industrial accident reports of the Ministry of Employment and Labor, the number of fatal accidents in the construction industry over the past 5 years has been higher than in other industries. Of these more than 50% of fatal accidents are initially caused by fall accidents. The central government is intensively managing falling/jamming protection device and the use of personal protective equipment to eradicate the inappropriate factors disrupting safety at construction sites. In addition, although efforts have been made to prevent safety accidents with the proposal of the Special Act on Construction Safety, fatalities on construction sites are constantly occurring. Therefore, this study developed a model that automatically detects the wearing state of the worker's safety helmet and belt using computer vision technology. In considerations of conditions occurring at construction sites, we suggest an optimization method, which has been verified in terms of the accuracy and operation speed of the proposed model. As a result, it is possible to improve the efficiency of inspection and patrol by construction site managers, which is expected to contribute to reinforcing competency of safety management.

• Journal of Preventive Medicine and Public Health
• /
• 제14권1호
• /
• pp.89-96
• /
• 1981

Of 2,740 industries in Jeonbug area which are covered by industrial insurance policy, 462 facilities which the accidents related to industry occured during the year of 1979 were studied. and the results are summarized as follows: 1. The accidents related to industry occured in 462 industries of the total 2,740 industrial facilities in Jeonbug area as of 1979. 2. The incidence rate of accident per 1,000 workers was 34.3 (49.2 in male workers and 12.8 in female workers), the frequency rate of the total industries in jeonbug area was 13.36, and severity rate was 1.3. 3. The frequency rates and severity rates by type of industry in study area were quite different to compare with those of national rates. 4. The incidence rate of construction industry was 223.6 per 1,000 workers, and that of transportation-communication industries were 78.6. 5. The proportion of industrial accidents of $20{\sim}24$ age group was 22.1 per cent of the total accidents, and the proportions decreased according to age increase. 6. The incidence rate in the industry having less than 49 workers was 20.6 per 1,000 workers, that of industry with $50{\sim]99$ workers was 26.7, that of industry with $100{\sim}199$ was 51.9, that of industry with $200{\sim}499$ was 80.2 and that of with more than 500 worker was 40.7. 7. The accidents which occured in the workers with experience of less than one year was 69.4 per cent of the total accidents, otherwise, the longer the workers have worked the less accident they have. 8. The most accidents occured in tile shift between 10 to 12 o'clock, and 16 to 18 hour 9. The primary causes of the industrial accidents were found to be collisions, machinery falling objects and falls. 10. The site of injury by type of industry were quite different, and the major site of injury was finger. 11. The laceration and open injuries of the accidents related to industry were 37.2 per cent of the total cases, and fractures or dislocations were 23.5 per cent, and contusions were 6.5 per cent. 12. Death rate of industrial accident was 5.0 per 10,000 workers, and those of industry were 47.6 in transportation, 42.8 in construction industry, 24.4 in mine industry, and 2.0 in manufacturing industry.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권5호
• /
• pp.417-425
• /
• 2018

본 논문에서는 조선해양 작업장에서 발생하는 중대재해를 줄이고 체계적인 안전관리를 위하여 ETA(event tree analysis)기반 시나리오 도출 및 ICT 기술접목을 통한 안전관리 구축방안을 제안한다. 안전보건공단과 (구)국민안전처의 통계결과 조선해양 관련 중대재해 중 가장 많이 발생하는 사고유형은 떨어짐이고, 주요사고원인은 안전대 미착용 및 안전대 고리 미체결이다. 이 문제를 해결하기 위해 ETA기반의 시나리오를 작성하여 안전사항에 따른 결과를 도출하고 이 결과를 바탕으로 사고예방을 위한 ICT 기술접목으로 해결방안을 제시한다. ETA 기반 시나리오 도출 및 ICT 기술접목을 통해 제안한 해결방안으로는 안전대 및 안전모 착용여부 감지시스템, 안전대 고리 체결여부 감지시스템, 안전거리 측정을 위한 걸이설비 측정시스템이다. 안전사항별 시스템을 통해 작업자의 떨어짐 위험을 줄여 사망확률을 낮출 수 있다. 제안한 방안을 통해 사고를 예방함으로써 조선해양 분야의 중대재해를 줄이고 체계적인 안전관리를 도모한다.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.78-94
• /
• 1991

The purpose of this study is to research the actual conditions of industrial accident patients and to produce worker satisfaction and a rational and effective counter measure pain. Direct interviews with 179 cases (in and out patients) were carried out during a three month period from April to July 1990, at six hospitals two general hospitals Sun Lin and Sung Mo in Po Hang, and four general hospitals in Taegu Kyung Pook University Hospital, Dong San Medical Center, Young Nam Medical Center and Catholic Hospital. The results of this study are summarized as follows: 1. Among the 179 cases, 51.6 % were male and 48.4 % were female. The two largest age groups were 30~39, 31.8 % and 20~29, 27.4 %. Among the 179 cases, 51.6% were married, the largest family number was 2 to 3, 41.1% and 4 to 5, 25.6%. Educationally, graduation from high school was the largest group, 46.4% among the patients, followed by middle school and primary school. The largest group income level was from 40~69만원, 45.2%. The largest group of patients who worked over 50 hrs. a week was 52.0%. The largest group of patients who worked less than 1 year was 44.7%, of the patients in work places of less than 100 people, 60.3% were injured and in work places of 100~299 people, 20.1% were injured. In manufacturing, the lagest group injured was 55.3%, the next group was transport, stroage, communication. The largest group of production workers injured was 40.2%. 2. The cause of injury in the largest group was facility problems, 33.5%. The next group was unsafe habits, 30.2% a lack of safety knowledge, 17.9% and insufficient supervision, 12.3%. The 30~39 year age group was head the highest number of injuries, 40.4% work places with more than 10 yeras of work, 44.4% work palces with more than 1000 people, 56.3% and mining accidents, 80.0%. Among these groups the highest cause of injury was due to facility problems. 3. The accident pattern showed machinery injuries 28.5% as the largest group, followed by falls & falling objects 17.3%, fire & electric 15.1%, struke by an object 14.5%, followed by overaction and vehicular accidents. The accident pattern showed 46.4 % among workers over the 50 year age group, workers in the 5~10 year group, 50.0 % places employing more than 1000 workers, 35.3 % : construction 73.7%, and construction workers 57.1%, among these fall & falling objects caused the greatest number of injuries. 4. The largest group of injuries was fractures 54.8%, trauma 14.5%, amputation 11.7%, open wound, and burns. The largest number of fractures occurred in people in the 30~39 year age group, 63.2 % over 10 years of work, 55.6% in work places of 300~400 people, 63.6% construction 63.2% and general workers 57.2 %. 5. The largest group of injuries was upper extremity 45.3%, lower extremity 24.0%, trunk 18.5 % and head or neck 12.2%. Of these groups, upper extremity injuries were the highest in those less 20 years old 75.0%, less than 1 years of work 59.5%, in work places of 500~999 people 60.0%, manufacturing 56.6 % and production workers 55.6%. 6. Periods of injury showed 34 people injured in September, to be the largest followed by October, 32 August, 22 people July, 19 people and the lowest December, 2 people. During the week, Friday had the largest group injured, 35 people followed by Saturday, 26 people and the lowest was Wednesday, 17 people, During the day 1400 hours had the largest group injured, 38 people followed by 800 hours, 31 people. 7. On a basis of 5 as the highest mark, the average, according to worker satisfaction showed facility safety 3.55, work environment 3.47, income 3.44, job 3.21 and treatment 2.98. 8. The correlation between general characteristics and injury showed that age was directly correlated to the duration of work(r=.2591) p<0.01, age was directly correlated to industry (r=2311) p<0.01, and the duration was directly correlated to occupation(r =.4372) p<0.001.

• The Journal of Korean Physical Therapy
• /
• 제3권1호
• /
• pp.151-174
• /
• 1991

The purpose of this study is to research the actual conditions of industrial accident patients and to produce worker satisfaction and a rational and effective counter measure plan. Direct interviews with 179 cases (in and out patients) were carried out during a three month period from April to July 1990, at six hospitals : two general hospitals Sun Lin and Sung Mo in Po Hang, and four general hospitals in Taegu : Kyung pooh University Hospital, Dong San Medical Center, Young Nam Medical Center and Catholic Hospital. The results of this study are summarized as fellows : 1. Among the 179 cases, $51.6\%$ were male and $48.4\%$ were female. The two largest age groups were 30-39, $31.8\%$ and 20-29, $27.4\%$. Among the 179 cases, $51.6\%$ were married, the largest family number was 2 to 3, $41.1\%$ and 4 to 5, $25.6\%$. Educationally, graduation from high school was the largest group, $46.4\%$ among ,the patients, followed by middle school and primary school. The largest group income level was from 40-69 만원, $45.2\%$. The largest group of patients who worked over 50 hrs. a week was $52.0\%$. The largest group of patients who worked less than 1 year was $44.7\%$, of the patients in work places of less than 100 people, $60.3\%$ were injured and in work places of 100-299 people, $20.1\%$ were injured. In manufacturing, the largest group injured was $55.3\%$, the next group was transport, storage, communication. The largest group of production workers injured was $40.2\%$. 2. The cause of injury in the largest group was facility problems, $33.5\%$. The next group was unsafe habits, $30.2\%$ ; a lack of safety knowledge, $17.9\%$ ; and insufficient supervision, $12.3\%$. The 30-39 year age group head the highest number of injuries, $40.4\%$ ; work places with more than 10 years of work, $44.4\%$ ; work places with more than 1000 people, $56.3\%$ and mining accidents, $80.0\%$. Among. these groups the highest cause of injury was due to facility problems. 3. The accident pattern showed machinery injuries $28.5\%$ as the largest group, followed by falls & falling objects $17.3\%$, fire & electric $15.1\%$, strucke by an object $14.5\%$, followed by overaction and vehicular accidents. The accident pattern showed $46.4\%$ among workers over the 50 year age group, workers in the 5-10 year group, $50.0\%$ ; places employing more than 1000 workers, $35.3\%$ ; construction $73.7\%$, and construction workers $57.1\%$, among these fall & falling objects caused the greatest number of injuries. 4. The largest group of injuries was fractures $54.8\%$, trauma $14.5\%$, amputation $11.7\%$, open wound, and burns. The largest number of fractures occurred in people in the 30-39 year age group, $63.2\%$ : over 10 years of work, $55.0\%$ ; in work places of 300-490 people, $63.6\%$ ; construction $63.2\%$ and general workers $57.2\%$. 5. The largest group of injuries was upper extremity $45.3\%$, lower extremity $24.0\%$, trunk $18.5\%$ and head or neck $12.2\%$. Of these groups, upper extremity injuries were the highest in those less than 20 years old $75.0\%$, less than 1 year or work $59.5\%$, in work places of 500-999 people $60.0\%$, manufacturing $56.6\%$ and production workers $55.6\%$. 6. Periods of injury showed 34 people injured in September, to be the largest followed by October, 32 ; August, 22 people : July, 19 people and the lowest December, 2 people. During the week, Friday had the largest group injured, 35 people ; followed by Saturday, 26 people and the lowest was Wednesday, 17 people, During the day 1400 hours had the largest group injured, 38 people ; followed by 800 hours, 31 people. 7. On a basis of 5 as the highest mark, the average, according to worker satisfaction showed facility safety 3.55, work environment 3.47, income 3.44, job 3.21 and treatment 2.98. 8. The correlation between general characteristics and injury showed that age was directly correlated to the duration of work (r=2591) p<0.01, age was directly correlated to industry (r=2311) p<0.01, and the duration was directly correlated to occupation (r=4372) p<0.001.

• 전자공학회논문지 IE
• /
• 제49권1호
• /
• pp.12-17
• /
• 2012

유비쿼터스 기술의 발전과 더불어 다양한 응용 분야가 대두되고 있으며 특히 건설 현장 분야는 유비쿼터스 기술 및 시스템을 도입 하였을 때 많은 기대효과를 얻을 수 있는 분야이다. 건설 현장에는 항상 많은 위험요소가 존재 하며 특히 추락 사고가 높은 발생 비율을 차지하고 있다. 이러한 사고를 방지하기 위해서 안전교육 및 안전장비 착용 등 다양한 노력을 기울이고 있다. 본 연구에서는 무선 회로 (TOA, RSSI)를 구성하여 작업자의 안전정보 및 위치정보를 실시간으로 모니터링 할 수 있는 시스템을 설계하고 제작하여 측정하였다. 산업용 장비에서 많이 사용되는 ATmega128 MCU를 사용하였으며, 무선 회로를 위해서는 나노트론사의 NanoPan 5357 모듈과 TI사의 CC2500 칩셋을 사용하였다. 또한, 주변환경 정보를 취득하기 위해서 3축가속도 및 압력 MEMS센서를 적용하였다. 이를 통해 작업자의 이동여부 및 고도정보를 판단할 수 있도록 시스템을 개발하였다. 응용소프트웨어는 NI사의 Labview 소프트웨어를 이용하여 개발을 진행하였다. 작업자가 위험지역에서 안전장비(안전고리)를 착용하지 않을 경우 서버 관리자와 작업자에게 경고 알람을 울리도록 시스템을 개발하였다.

• Journal of Trauma and Injury
• /
• 제21권1호
• /
• pp.53-58
• /
• 2008

Purpose: Skiing and snowboarding are becoming increasingly popular. Accordingly, the incidences of injuries among skiers and snowboarders are also increasing. The purpose of this study was to investigate the injury patterns of and the contributing factors to head injuries of skiers and snowboarders and to evaluate the differences in characteristics between skiing and snowboarding head injuries. Methods: One-hundred patients who visited the emergency department of Wonju Christian Hospital between January 2005 and March 2007 due to head injuries from skiing and snowboarding were enrolled. The mechanisms and the histories of the injuries were investigated by surveying the patients, and the degrees of head injuries were estimated by using brain CT and the Glasgow Coma Scale. The degrees and the characteristics of brain injuries were also analyzed and compared between skiers and snowboarders. Results: Out of 100 patients, 39 were injured by skiing, and 61 were injured by snowboarding. The mean age of the skiers was $26.7{\pm}10.0$, and that of the snowboarders was $26.7{\pm}6.2$. The percentage of male skiers was 43.6%, and that of snowboarders was 63.9%. The most frequent initial chief complaints of head-injured skiers and snowboarders were headache and mental change. The most common mechanism of injuries was a slip down. The mean Abbreviated Injury Scale Score (AIS score) of the skier group was $4.5{\pm}2.1$ and that of the snowboarder group was $5.9{\pm}5.0$ (p=0.222). The percentage of helmet users was 7.1% among skiers and 20.8% among snowboarders (p=0.346). Head injuries were composed of cerebral concussion (92.0%) and intracranial hemorrhage (8.0%). Intracranial hemorrhage was most frequently caused by falling down (62.5%). Conclusion: The most common type of head injury to skiers and snowboarders was cerebral concussion, and severe damage was usually caused by jumping and falling down. No differences in the characteristics of the head injuries existed between skiing and snowboarding injuries.

• 한국콘텐츠학회논문지
• /
• 제19권3호
• /
• pp.520-529
• /
• 2019

이 연구는 부산시 소방공무원들의 건강장애 유해인자에 대해서 실증적으로 살펴봄으로써 향후 소방공무원들의 건강관리에 기초자료를 제공하고자 하였다. 결과적으로, 우선, 화재진압대원의 유해인자를 보면, 아무래도 화재현장에서 근무하기 때문에 업무특성을 반영하여 화재 시 발생하는 유해화학물질의 위험성을 가장 심각하게 인식하고 있다는 것을 확인할 수 있었고, 다음으로 화재 진압시에 추락위험을 높이 인식하고 있다는 것을 확인할 수 있었다. 다음, 구조대원의 유해인자에서는 구조대원이 화재 현장이나 각종 사고현장에서 요구조자를 구조하는 임무를 수행하기 때문에 현장 유해화학물질 위험성을 가장 높게 인식하고 있었고, 또한 구조현장에서의 추락위험을 두 번째로 높게 인식하고 있었는데 이는 업무 특성이 반영된 결과라고 볼 수 있다. 또한, 구급대원의 유해인자를 보면, 구급대원의 교대근무의 위험성을 가장 높게 인식하고 있었다. 이는 기존 연구에서 교대근무가 건강에 유해하다는 것과 일맥상통하는 대목이다. 다음으로, 환자이송 과부하가 큰 유해요소로 꼽았다는 것은 그만큼 구급업무의 특성상 많은 이송환자들이 많아짐으로 인해서 각종 2차 사고가 발생할 가능성이 있기 때문으로 사료되며, 구급현장 이송 중에는 빠르게 구급차량을 이동시켜야하기 때문에 교통사고 유발 가능성도 유해요소로 인식되고 있다는 것을 알 수 있다. 마지막, 유해인자 인식 비교에서는 구조대원이 가장 위험하다고 인식하고 있는 것을 알 수 있다. 이는 업무 특성과도 연관되는데, 구조대원의 경우가 화재 등 각종 위험현장과 가장 근접하게 활동을 하고 있기 때문으로 사료된다.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.57-66
• /
• 2022

고용노동부 공문(최근 건설업 사망사고 발생 현황 안내 및 안전관리 철저 당부, 2022.4.4.)에 따르면, 중대재해처벌법 시행(2022.1.27.) 이후 2022.3.31.까지 공사금액 50억원 이상 건설공사에서 17건의 사망사고가 발생하여 18명이 사망했다. 공사규모로 보면 50억~120억원 7건, 120억~800억원 5건, 800억원이상 5건이 발생했다. 사망사고 발생원인은 떨어짐 9건(50%), 맞음 5건(28%), 무너짐 2건(11%), 끼임 1건(5%), 익사 1건(5%)으로 조사됐다. 사망사고의 대부분을 차지하는 떨어짐과 맞음으로 인한 사망사고를 줄이기 위해서는 안전시설물을 강화할 필요가 있으며, 추락방지망·개구부·안전난간이 완벽하게 설치되면 대부분의 떨어짐과 맞음 사고는 예방 할 수 있다. 따라서 본 고에서는 소규모 공동주택인 도시형생활주택신축현장의 떨어짐과 맞음 사고를 예방하기 위해서 안전시설물 개선을 통한 특허기술 개발과 활용 사례를 제시하고자 한다.