• International Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.22-25
• /
• 2016

This dissertation tried to analyze passenger behaviors after an accident with the possibilities of a variety of accidents open reflecting the phases of the times of increasing interests in safety of passengers as the use of means of transportation such as cars and airplanes is increasing. Because a lot of data on head-on collisions, broadside collisions and reverse side collisions have been gathered through lots of experiments and interpretations, I chose to study a relatively unfamiliar subject, dropping collision. For example, I tried to study passenger behaviors in seating position after a dropping collision in preparation for falling accidents due to recent frequently-occurring sinkholes, driver's carelessness or mechanical problems. I used MADYMO, passenger behavior interpretation program, and experimented with 2 meters high Drop Test device which I made in person to increase the reliability of the results. On the basis of these, I compared the real experiments with interpretations.

• Journal of Chest Surgery
• /
• v.46 no.2
• /
• pp.130-134
• /
• 2013

Background: Rib fractures are the most common type of thoracic trauma and cause other complications. We explored the risk factors for pneumonia in patients with multiple rib fractures. Materials and Methods: Four hundred and eighteen patients who visited our hospital with multiple rib fractures between January 2002 and December 2008 were retrospectively reviewed. Chest X-rays and chest computed tomography were used to identify injury severity. Patients with only a single rib fracture or who were transferred to another hospital within 2 days were excluded. Results: There were 327 male patients (78%), and the median age was 53 years. The etiologies of the patients' trauma included traffic accidents in 164 cases (39%), falls in 78 cases (19%), slipping and falling in 90 (22%), pedestrian accidents in 30 (7%), industrial accidents in 41 (10%), and assault in 15 (4%). The median number of rib fractures was 4.8. Pulmonary complications including flail chest (2.3%), lung contusion (22%), hemothorax (62%), pneumothorax (31%), and hemopneumothorax (20%) occurred. Chest tubes were inserted into the thoracic cavity in 216 cases (52%), and the median duration of chest tube insertion was 10.26 days. The Injury Severity Score (ISS) and rib score had a median of 15.27 and 6.9, respectively. Pneumonia occurred in 18 cases (4.3%). Of the total cases, 33% of the cases were managed in the intensive care unit (ICU), and the median duration of stay in the ICU was 7.74 days. Antibiotics were administered in 399 patients (95%) for a median of 10.53 days. Antibiotics were used for more than 6 days in 284 patients (68%). The factors affecting pneumonia in patients with multiple rib fractures in multivariate analysis included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). The use of antibiotics was not associated with the occurrence of pneumonia (p=0.28). In-hospital mortality was 5.3% (n=22). Conclusion: The factors affecting risk of pneumonia in patients with multiple rib fractures included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). Elderly patients with multiple traumas have a high risk of pneumonia and should be treated accordingly.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1561-1572
• /
• 2016

The ability to handle materials from one location to another, whether during transit or at the worksite is vital to all segments of industry. To varying degrees, many personnel in numerous workplaces take part in materials handling. Consequently, some employees are injured. In fact, rigging & slinging is a dangerous work using a crane and sling equipment to carry a cargo and the mishandling of materials is the single largest cause of accidents and injuries in the workplace. The majority of accidents associated with cranes and other lifting appliances are caused by faulty slinging, overloading, unbalanced loads, etc. which result in the load falling or tipping out of control, causing injury to people, damage to plant, machinery and the load. Therefore, recognizing the dangers of the works, there are much technical support including skill training in various institutes to minimize accidents during works on land. Although rigging work at sea is much dangerous than on land work because it needs to take account of the movements of the ships and waves, etc. in addition to land based rigging hazards, it is insufficient in appropriate actions that can improve the safety of the workers at sea. Therefore, this study suggested a rigging and slinging course for seafarers to improve their safety at sea by researching hazards and risk of rigging works and related skill training conducted on land.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.450-454
• /
• 2007

In line with the construction projects, which have been increasingly getting larger and complex, safety accident has been on the rise, particularly those in association with the construction equipment. In a bid to prevent the safety accident, it's needed to analyze the cause of such accidents. The thesis was intended to identify the cause of safety accident by reviewing the cases of construction disaster complied by Korea Occupational Safety and Health Agency. The cases subject to study were limited to the accident by excavator. Summarizing the study is as follows. 1) Among the cause of accidents caused by excavator were, in order of high frequency, being caught in equipment or machine, falling, being crashed or bumped. 2) Among the causes of accident were, in order of high frequency, worker's unauthorized presence within the range of equipment operation. inappropriate use, failure of equipment inspection prior to starting work and inappropriate work method. The study is highly expected to pave the foundation for further study as well as to make commitment to mitigating the safety accident.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.2
• /
• pp.125-131
• /
• 2005

Injury has recently become a major world-wide health problem. Injury related deaths occur in many actively working young people and produce major social and economical losses. However health related specialists do not recognize the importance of injury and there have not been many studies related to this problem. This research studied the trends of injury related research in Korea, mortality rate and prevalence rate, socio-economical losses and control in Korea and out of the country, based on literature from Korea and without such as statistical yearly reports on causes of deaths and OECD health reports, as well as WHO web sites. Studies in Korea about injury were very few, with 9 in the 1960's, 5 in the 1980's, 4 in the 1990's and 5 in 2000's. Mortality rate of injury was higher in Korea than in England, USA or Japan, especially in car accidents, suicide and falls. In Korea, the yearly trends in mortality rates were highest in car accidents but those rates are falling, suicide is steadily rising, with highest rate in 2003. Falls is in second rank with no change in rates. In 2003, the ten causes of death in Korea were suicide in 5th rank, transport accidents in 7th rank, and falls in 10th rank. Considering age groups, in the teens, transport accidents were 1st rank, in the 20's and 30's, suicide was 1st rank, and although there were some differences, falls, drowning, assault, fire were in the top 10. Prevalence rates of injury could not be known, but in 2001, according to the National Health and Nutrition Survey, lifelong injury was 10%, and yearly major injury was 1.3%, major injury for two weeks was 0.1%, and minor injury was 10%. In other foreign countries, injury has become to be recognized as a major health related problem, and much programs are being set up to reduce injury related deaths and injuries. WHO is putting much effort in prevention of violence and transport accidents, and in the USA, Canada and Europe, there are injury surveillance systems. Recently, as suicide is increasing rapidly and providing much problems, each country are managing suicide prevention programs. In Korea, Ministry of Construction and Transportation is managing and guiding the policies for prevention of transport accidents. In September of 2004, the Ministry of Health and Welfare has set up a 5 year plan of suicide prevention.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2012

As we are turnning into the aged society, accidents by falling down are increasing in the aged people's group. In this paper, we design the system with the 3-Axis acceleration sensor which is composed by a single chip. The body activity signal is measured with the signal detector and RF communicator in this proposed system and the and falling by the entering signal pattern analysis with 3-Axis acceleration sensor. For the RF communication, we are using nRF24L01p and 8bits ATmega uC for the processor. The error of energy expenditure estimation between motor driven treadmill and proposed a body activity module was 7.8% respectively. Human activities and falling is monitored according to analyze and judge the critical value of the Signal Vector. as falled down if they don't turn off the alarm after specific period and the aged person's after falling down activities are their position and more.

• Journal of Chest Surgery
• /
• v.14 no.1
• /
• pp.83-86
• /
• 1981

Eight cases by power tiller accidents experienced for 3 years from Jan. 1978 to Dec. 1980 were studied clinically. The results are as follows: 1. The most of the patients were thirties to fifties, and the incidence rate of male to female 7:1. 2. The common injuries were hemopneumothorax and multiple rib fractures [respectively and the other associated injuries were hepatic and delayed splenic ruptures, and fractures of the another sites. 3. The accident forms were overturning [50.0%], falling down from the power tiller [37.5%], and collision against the power tiller [12.5%]. 4. All of the drivers and 75% of the passengers in the patients were drunken states at the accident time. 5. The common methods of treatment were closed thoracostomy [62.5%], conservative treatment [37.5%], and exploratory laparotomy [25.0%].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.286-286
• /
• 2009

According to previous report, aged sleeves for old transmission lines have various defect such as biased installation or corrosion of steel sleeve. These defects can cause serious accidents such as rapid increasing of sag or falling out of overhead conductor from sleeves. Moreover, the defects have been limited power capacity of transmission line. This paper study on mechanical and thermal behavior of ACSR $410mm^2$ conductor and sleeve with various defect model. The conductor has been aged artificially for 50 years. The detailed results were presented in the text.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.490-494
• /
• 2008

U-Channel Bridge is effective bridge type, because its edge beam performs role of barrier and enables to reduce additional dead loads. Although it is effective to reduce additional dead loads, there is possibility of bridge collapse under impact load due to car crash. Also, edge beam must have ability to induce safe driving and prevent falling accidents. Therefore, it requires behavior analysis and property investigation through the vehicle impact crashing edge beam. This study presents method of structural analysis of U-channel bridge and investigates design specifications for the effect of the edge beam under the vehicle impact. Also, it carries out stability investigation of behavior of edge beam and slab, based on Korean Highway Bridge Design Specifications and AASHTO LRFD Bridge Design Specification.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1297_1298
• /
• 2009

According to previous report, aged sleeves for old transmission lines have various defect such as biased installation or corrosion of steel sleeve. These defects occupied almost 50 percent of investigated aged sleeves. These defects can cause serious accidents such as rapid increasing of sag or falling out of overhead conductor from sleeves. Moreover, the defects have been limited power capacity of transmission line. This paper study on thermal behavior of ACSR 480Rail conductor and sleeve with various defect model. The detailed results were presented in the text.