• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.404-413
• /
• 2006

This study examines multiple quality optimization of the injection molding for Polyether Ether Ketone (PEEK). It also looks into the dimensional deviation and strength of screws that are reduced and improved for the molding quality, respectively. This study applies the Taguchi method to cut down on the number of experiments and combines grey relational analysis to determine the optimal processing parameters for multiple quality characteristics. The quality characteristics of this experiment are the screws' outer diameter, tensile strength and twisting strength. First, one should determine the processing parameters that may affect the injection molding with the $L_{18}(2^1{\times}3^7)$ orthogonal, including mold temperature, pre-plasticity amount, injection pressure, injection speed, screw speed, packing pressure, packing time and cooling time. Then, the grey relational analysis, whose response table and response graph indicate the optimum processing parameters for multiple quality characteristics, is applied to resolve this drawback. The Taguchi method only takes a single quality characteristic into consideration. Finally, a processing parameter prediction system is established by using the back-propagation neural network. The percentage errors all fall within 2%, between the predicted values and the target values. This reveals that the prediction system established in this study produces excellent results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.2
• /
• pp.163-170
• /
• 1995

The purpose of this study was to investigate the epidemiology of midface fractures. We observed clinically 71 patients with midface fracture who visited the Department of oral and maxillofacial-surgery, Chosun University, Dental Hospital, from 1991 to 1994. The results obtained were as follows. 1. There was the highest age incidence in the third decade(29.6%). 2. There was the highest incidence in the summer(36.6%). 3. The most etiologic factor of midface fracture was traffic accidents(43.6%) and next factor was fall down(38.0%). 4. The highest incidence fracture was zygomatic arch(38.7%) and next fracture was ZMC fracture(31.5%). 5. Most midface fracture was treated within 2 weeks(86.7%). 6. Midface fractures was most frequently combined with mandibular fracture(15.5%), head injuries(14.1%), orthhopedic injuries(8.5), thorax & abdomen(5.6%). 7. The highest complication was the nerve injury(8명), and next complications were infection(3명), epiphora(3명) etc.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.191-199
• /
• 1997

Mandibular trauma is developed due to traffic accident, fall down, industrial injury, and others. TMJ disorder is usually also developed after facial traumatic injury. Many authors suggested that disc displacement or tearing, acute synovitis, TMJ ankylosis, traumatic arthritis, or effusion are developed after facial trauma. It is still very controversible what is the best treatment of TMJ injury such as condylar fracture and meniscal injury. In TMJ injury, synovial inflammation is developed and pain mediators such as prostaglandin E2 or leukotriene B4 are released from the synovial membrane. This can be a cause of TMJ disorder. I present a variety of experimental study about the condylar fracture and meniscal injury and enzyme-immunoassay of synovial fluid after mandibular trauma that have been studied since 1992 and establish the treatment criteria of traumatic TMJ injury. I think that the treatment option of condylar fracture depends upon the surgeon's criteria exclusively. There are no significant differences between conservative and surgical treatment. If the aggressive functional physical therapy and long-term followup be performed, the favorable functional recovery of TMJ can be obtained. And I think that the initial surgical management of meniscus of TMJ is unnecessary in condylar fracture. And also arthrocentesis can be available to release the patient's subjective symptoms and improve the healing of injured TMJ.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.4
• /
• pp.50-59
• /
• 1998

This paper describes a 3.3V 8bit CMOS digital to analog converter (DAC) with two state current cell metrix architecture which consists of a 4 MSB and a 4 LSB current matrix stage. The symmetric two stage current cell matrix architecture allow the designed DAC to reduce hot only a complexity of decoding logics, but also a number of wider swing cascode curent mirros. The designed DAC with an active chip area of 0.8 mm$_{2}$ is fabricated by a 0.8 .mu.m CMOS n-well standard digital process. The experimental data shows that the rise/fall time, the settling time, and INL/DNL are6ns, 15ns, and a less than .+-.0.8/.+-.0.75 LB, respectively. The designed DAC is fully operational for the power supply down to 2.0V, such that the DAC is suitable for a low voltage and a low power system application. The power dissipation of the DAC with a single power supply of 3.3V is measured to be 34.5mW.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.109-116
• /
• 2020

The study examines the nexus between financial development and economic growth in India during Q1: 1996 to Q3: 2018. This study employs time-series data of real GDP and ratio of broad money to GDP as a proxy for economic and financial development, respectively. The data are obtained from RBI database on the Indian economy. All variables are seasonally adjusted using X12-arima technique and expressed in natural logarithm form. Non-linear Autoregressive Distributed Lag (NARDL) bound test has been used to check for cointegrating relationship of these two variables. Empirical findings suggest that, unlike in the short run, in the long run financial development does impact economic growth positively. Further, a symmetric effect of positive and negative components of financial development is found for the Indian economy, whereas the effect of control variable like exchange rate and trade openness is in consonance with common economic intuition. Exchange rate is in consonance with intuitive economic logic that a fall in exchange rate makes exports cheaper and increases the quantity of export, which improves the balance of payment and leads to a rise in aggregate demand, hence improves economic growth. This paper contributes to the existing literature on India by breaking down financial indicator into positive and negative components to examine the finance-growth relationship.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.4
• /
• pp.1-8
• /
• 2014

Purpose: The purpose of this study was to recognize the importance of balance in order to minimize daily living restrictions and to prevent falls due to aging, and develop an eight-week theraband exercise program to benefit the elderly. Method: A total of 20 elderly participants were divided into two groups. Group A used warm-up and finishing exercises for eight weeks including stretching and rhythm exercises conducted in a theraband exercise. Group B performed no exercises. Both A and B groups at weeks 1, weeks 4, weeks 8 were measured for deltoid and quadriceps femoris strength, balance and proprioception. Result: There was a significant difference in deltoid and quadriceps femoris muscle strength, balance and proprioception between Group A and Group B(p<0.05). Conclusion: The results of this study show that theraband exercises are thought to be able to contribute to the promotion of deltoid and quadriceps femoris muscle strength, balance and proprioception. It also contributes to minimize activity of daily living restrictions and prevent fall down in elderly. However in this study, generalization has been limited because of exercise duration, limited number of experiments and intensity modulated of theraband.

• Journal of Chest Surgery
• /
• v.8 no.2
• /
• pp.119-124
• /
• 1975

This is a case report of the rupture of the trachea and the esophagus following external blunt trauma without any associated injury. A 7 year old male patient was brought to the emergency room. Hanyang University Hospital, on 23 Jul, 1974 while he played under the pile of pingpong table A table was fall down over the patient accidentally. The patient was injured by the table and found lying in unconsciousness on the ground.There was subcutaneous emphysema on his anterior chest and neck. A contusion on the upper part of the sternum was noted. The breathing sound were diminished over the left side of the chest. Ronchi were heard over the right lung field. This patient was suffered from vomiting, dypsnea, and irritable mental state after this accident. On the chest roentgenogram in A-P view, hyperlucency at the mediastinum and parapericardiac area suggested the pneumomediastinum. On the next day, a diagnosis of the tracheal and esophageal rupture was confirmed by the esophagogram with Lipiodol swallowing. A right thoracotomy was performed and ruptured orifice of the trachea and the esophagus were closed with interrupted sutures. Postoperative course was uneventful and primary closure of the rupture of the trachea and the esophagus were succeeded.

• Journal of Chest Surgery
• /
• v.28 no.9
• /
• pp.847-850
• /
• 1995

For the purpose of evaluation of clinical characteristics in multiple rib fracture due to accident , 24 cases treated by surgical rib fixation using Judet`s strut for multiple rib fracture and flail chestduring the period from June 1993 to October 1994 were reviewed. There were 17 males and 7 females.They ranged in age from 19 years old to 56 years old. The causes of rib fracture were traffic accident in 18 cases, fall down in 3 cases, compression in 2 cases stab wound in 1 case. The number of rib fracture were five in 7 cases, six in 5 cases, four in 5 cases, three in 3 cases. Associated intrathoracic injuries were hemopneumothorax in 12 cases, hemothorax in 10 cases, lung laceration or hemorrhagic contusion in 7 cases. Associated extrathoracic injuries were abdominal injuries in 21 cases, orthopedic problem in 7 cases, head trauma in 4 cases. The most common fractured site was posterolateral portion of the ribs. The causes for operation were flail chest, severe rib displacement and pain, hemothorax or hemopneumothorax with continuous air leakage and stab wound. There were 6 postoperative complications ; one with hydrothorax, two with fibrothorax, two with wound infection and one case of death due to multiful organ failure. Postoperatively, all patients became comfortable and complained less painful. Twenty patients restored spontaneous breathing without ventilator support, three patients were ventilated during a day and one patient expired after 2 days. There were no morbidity and mortality related to operation.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.673-681
• /
• 2005

Sewing is an important process in clothes-making. It is directly or indirectly connected to a factor of fitness, as is the case of pattern making and design. The purpose of this study is to compare and analyze the sewing methods for tight skirts currently being sold by twelve clothing companies on the market. For the purpose, the skirts, which was released in 2002 Fall season, was physically disassembled and then every sewing detail was closely investigated. The major findings are as follows: All sorts of the skirts show different sewing methods in hemlines, back slits, and zipper. Hemlines and zippers, hand-sewn, are often used by high-price brands. Brands that emphasize trends usually use machine sewing. Specifically, the sewing methods applied in the allowances at the upper part of the back slit show significant differences among brands. One method leaves allowances enough in both sides for the stability of the skirts, another trims both allowances very closely, and the other trims only left-side allowance down to the edge of the back slit. This study findings will be helpful not only in understanding sewing techniques for skirts and improving its quality, but also in offering more comfortable and superior clothes for consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.314-318
• /
• 2006

This study is to analyze the intensity of welding part by simulating the dynamic procedure during the fracture of plates with spot welding. The upper and tower plates attached with spot welding can be seen to fall apart at the elapsed time of 0.64 ms after the upper plate is stretched from the lower plate. The maximum von Mises stress is shown at the welding part in the mid of upper and lower plates. The internal energy decreases largely and the kinetic energy increases suddenly near the elapsed time of 0.64 ms when welding part breaks down. The sliding energy decreases with step-by-step style as the time elapses. The value of this energy becomes 0 at the elapsed time of 0.2 ms and on the contrary, two plates stick each other as this value becomes a minus after this time.