• 콘크리트학회논문집
• /
• 제24권5호
• /
• pp.585-596
• /
• 2012

이 연구는 교량이나 주차장 건물 등에 적용이 가능한 GFRP 보강 철근 폴리머 콘크리트 T형 보의 휨 특성에 관한 연구로서 GFRP 보강 수준에 따른 압축파괴(compression failure: CF), 인장파괴(tension failure: TF) 및 GFRP 보강재의 파괴(fiber sheet failure: FF) 등 파괴모드의 판단과 결정방법을 제시하고, 파괴모드별 설계휨강도 산정식을 제시하였다. GFRP 보강 철근콘크리트 보에서는 FF, TF, CF 등 3가지 파괴모드 중에서 철근항복 ${\rightarrow}$ GFRP 파단 ${\rightarrow}$ 압축측 콘크리트 파괴의 순으로 진행되는 FF 파괴모드가 가장 이상적이다. FF 파괴모드의 경우 압축측 폴리머 콘크리트가 극한변형률(${\varepsilon}_{cu}$)에 도달하기 전에 GFRP가 먼저 파단되므로 콘크리트의 극한상태를 기반으로 하는 기존의 등가직사각형 응력블럭의 개념을 적용할 수 없다. 따라서 이 연구에서는 폴리머 콘크리트의 특성에 부합되는 이상화된 폴리머 콘크리트의 압축응력-변형률 곡선을 제안하고, 폴리머 콘크리트의 변형률을 기반으로 하여 응력블럭 매개변수 ${\alpha}$, ${\beta}$를 도출하였다. 또한 T형 보의 형상비에 따른의 압축응력 분포 및 설계휨강도 특성을 규명하고 적정한 형상비를 2.5로 제시하였으며, GFRP 보강재의 두께 및 높이에 따른 설계휨강도 산정식을 제시하고 그 식의 적정성을 실험과 이론해석에 의해 입증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.941-946
• /
• 2002

Short reinforced concrete bridge piers are particularly susceptible to shear failure as a consequence of the high shear/moment ratio and conservatism in the flexural strength design of existing RC bridge pier, which were constructed before 1992. In addition, shear failure is brittle and involves rapid strength degradation. Inelastic shear deformation is thus unsuitable for ductile seismic response. It is, however, believed that there are not many experimental research works for shear failure of the existing RC bridge pier in Korean peninsula subjected to earthquake motions. The object of this research is to evaluate the seismic performance of existing circular RC bridge piers by the quasi-static test. Existing RC bridge piers were moderate seismically designed in accordance with the conventional provisions of Korea Highway Design Specification. This study has been performed to verify the effect of aspect ratio (column height-diameter ratio). Quasi-static test has been done to investigate the physical seismic performance of RC bridge piers, such as lateral force-displacement hysteric curve, envelope curve etc.

• Steel and Composite Structures
• /
• 제11권5호
• /
• pp.391-402
• /
• 2011

It is clear from the former researches on reinforced concrete filled steel tubular (RCFT) structures that RCFT structures have higher strength and deformation capacity than concrete filled steel tubular (CFT) structures. However, in the case of actual applications to large-scaled structures, the thin-walled steel tube must be used from the view point of economic condition. Therefore, in this study, compression tests of RCFT columns which were made by thin-walled steel tube or small load-sharing ratio in cooperation with high strength concrete were carried out, meanwhile corresponding tests of CFT, reinforced concrete (RC), pure concrete and steel tube columns were done to compare with RCFT. By the a series of comparison and analysis, characteristics of RCFT columns were clarified, and following conclusions were drawn: RCFT structures can effectively avoided from brittle failure by the using of reinforcement while CFT structures are damaged due to the brittle failure; with RCFT structures, excellent bearing capacity can be achieved in plastic zone by combining the thin-walled steel tube with high strength concrete and reinforcement. The smaller load-sharing ratio can made the reinforcement play full role; Combination of thin-walled steel tube with high strength concrete and reinforcement is effective way to construct large-scaled structures.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.125-132
• /
• 2011

The rupture of an expansion tube is mainly affected by the expansion ratio and the external shape of the punch used to expand the tube. In order to prevent the tube from rupture, the effect of the external shape of the punch should be considered in the design. The aim of this paper is to confirm the effect of key design parameters of the punch on rupture of the tube using a finite element analysis with a ductile damage model. The results of the analysis indicated that the expansion ratio of the tube was mainly affected by variation of the radius of the punch. However, the rupture was more affected by variation of the punch angle than the radius of the punch. The existence of a specific punch angle at which rupture did not occur, even if the radius of the punch was increased, was found from the results.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.663-675
• /
• 2016

The effects of slenderness ratio, eccentricity and column slope on the load-carrying capacities and failure modes of variable and uniform concrete filled steel tubular (CFST) latticed columns under axial and eccentric compression were investigated and compared in this study. The results clearly show that all the CFST latticed columns with variable cross section exhibit an overall failure, which is similar to that of CFST latticed columns with a uniform cross section. The load-carrying capacity decreases with the increase of the slenderness ratio or the eccentricity. For 2-m specimens with a slenderness ratio of 9, the ultimate load-carrying capacity is increased by 3% and 5% for variable CFST latticed columns with a slope of 1:40 and 1:20 as compared with that of uniform CFST latticed columns, respectively. For the eccentrically compressed variable CFST latticed columns, the strain of the columns at the loading side, as well as the difference in the strain, increases from the bottom to the cap, and a more significant increase in strain is observed in the cross section closer to the column cap.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.411-422
• /
• 2019

Six shear-critical square tubed steel reinforced concrete (TSRC) columns using the high-strength concrete ($f_{cu,150}=86.6MPa$) were tested under constant axial and lateral cyclic loads. The height-to-depth ratio of the short column specimens was specified as 2.6, and the axial load ratio and the number of shear studs on the steel shape were considered as two main parameters. The shear failure mode of short square TSRC columns was observed from the test. The steel tube with diagonal stiffener plates provided effective confinement to the concrete core, while welding shear studs on the steel section appeared not significantly enhancing the seismic behavior of short square TRSC columns. Specimens with higher axial load ratio showed higher lateral stiffness and shear strength but worse ductility. A modified ACI design method is proposed to calculate the nominal shear strength, which agrees well with the test database containing ten short square TSRC columns with shear failure mode from this study and other related literature.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.469-477
• /
• 2019

The understanding of tool-rock interaction mechanism is of high essence for improving the rock breaking efficiency and optimizing the drilling parameters in mechanical rock breaking. In this study, the tool-rock interaction models of indentation and cutting are carried out by employing the discrete element method (DEM) to examine the rock failure modes of various brittleness rocks and critical indentation and cutting depths of the ductile to brittle failure mode transition. The results show that the cluster size and inter-cluster to intra-cluster bond strength ratio are the key factors which influence the UCS magnitude and the UCS to BTS ratio. The UCS to BTS strength ratio can be increased to a more realistic value using clustered rock model so that the characteristics of real rocks can be better represented. The critical indentation and cutting depth decrease with the brittleness of rock increases and the decreasing rate reduces dramatically against the brittleness value. This effort may lead to a better understanding of rock breaking mechanisms in mechanical excavation, and may contribute to the improvement in the design of rock excavation machines and the related parameters determination.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.257-265
• /
• 2016

철근콘크리트 깊은 보의 파괴거동은 전단경간비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 이 논문에서는 철근콘크리트 깊은 보의 파괴거동 특성을 합리적인 방법으로 반영하여 전단경간비가 3 이하인 철근콘크리트 보의 설계를 수행할 수 있는 두 종류의 단순 1차 부정정 스트럿-타이 모델을 제안하였다. 또한 1차 부정정 스트럿-타이 모델을 정정 스트럿-타이 모델로 변환시켜 현행 스트럿-타이 모델 설계기준에 의한 철근콘크리트 깊은 보의 설계를 가능하게 하는 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율 결정 시 철근콘크리트 보의 강도 및 거동에 영향을 미치는 전단경간비, 휨철근비, 콘크리트의 압축강도 등의 영향을 반영하였다. 이 논문의 동반논문에서는 여러 현행 설계기준의 방법들과 이 연구에서 제안한 스트럿-타이 모델 및 하중분배율을 이용하여 파괴실험이 수행된 전단경간비가 3 이하인 다양한 종류의 335개 철근콘크리트 보의 강도를 평가하고, 이 연구에서 제안한 스트럿-타이 모델 및 하중분배율의 타당성을 검증하였다.

• 한국지반환경공학회 논문집
• /
• 제7권5호
• /
• pp.57-66
• /
• 2006

본 연구에서는 모래다짐말뚝(SCP) 및 쇄석다짐말뚝(GCP)으로 개량된 복합 지반의 응력 분담비, 말뚝 및 지반의 변형형태를 파악하기 위하여 말뚝의 치환율(20%, 40%, 60%)을 변화시키면서 연성재하 원심모형실험을 수행하였다. 실험결과, 동일 치환율에서 쇄석 다짐말뚝에 작용하는 응력이 모래다짐말뚝에 작용하는 응력보다 크게 나타났다. 치환율 40%에서 쇄석다짐말뚝으로 개량된 연약점토지반의 평균 응력분담비가 모래다짐말뚝을 설치한 경우보다 약간 크게 나타났다. GCP는 팽창파괴가 발생되었으며, SCP는 팽창 및 전단파괴가 동시에 발생함을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.403-408
• /
• 2003

The objective of this study is to understand the variables affected the confinement for the transverse reinforcement of the reinforced concrete structural walls with the T-shaped cross section subjected to cyclic lateral loads. The structural performance of T-shaped walls was advanced by the transverse reinforcement which restrained the concrete subjected to compressive stress. If the arrangement of transverse reinforcement was not suitable for the confinement, T-shaped walls happened the brittle failure by web crushing or bucking of vertical reinforcement at the compression zone. It is necessary to confine transverse reinforcement in order to prevent the these failure. But the location of neutral axis and the magnitude of ultimate strain vary according to the section shape, a ratio of axial load, a ratio of wall cross sectional area to the floor-plan area, an aspect ratio and the reinforcement ratio. Therefore, the objective of this research is to grasp the location of neutral axis and the range which needs for the confinement of transverse reinforcement through the results of the sectional analysis which varies the ratio of axial load and the ratio of vertical reinforcement.