• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1997

Cis-dichlorodiammine platin${\mu}M$II (Cisplatin), an effective chemotherapeutic agent, induces acute renal failure by unknown mechanisms. To investigate direct toxic effects of cisplatin on the renal proximal tubular transport system, LLC-$PK_1$ cell line was selected as a cell model and the sugar transport activity was evaluated during a course of cisplatin treatment. Cells grown to confluence were treated with cisplatin for 60 min, washed, and then incubated for up to 5 days. At appropriate intervals, cells were tested for sugar transport activity using ${\alpha}-methyl-D-[^{14}C]glucopyranoside$ (AMG) as a model substrate. In cells treated with 100 ${\mu}M$ cisplatin, the AMG uptake was progressively impaired after 3 days. The viability of cells was not substantially changed with cisplatin of less than 100 ${\mu}M$, but it decreased markedly with 150 and 200 ${\mu}M$. In cisplatin-treated cells, the $Na^+$ -dependent AMG uptake was drastically inhibited with no change in the $Na^+$ -independent uptake. Kinetic analysis indicated that Vmax was suppressed, but Km was not altered. The $Na^+$ -dependent phlorizin binding was also decreased in cisplatin-treated cells. However, the AMG efflux from preloaded cells was not apparently retarded by cisplatin treatment. These data indicate that the cisplatin treatment impairs $Na^+$ -hexose cotransporters in LLC-$PK_1$ cells and suggest strongly that defects in transporter function at the luminal plasma membrane of the proximal tubular cells constitute an important pathogenic mechanism of cisplatin nephrotoxicity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3827-3831
• /
• 2014

This paper aims to solve the problem deterioration of power fuses. The deterioration of a power fuse is a cause of failure misoperation by a normal current flowing reduplicatively to fuse the element. An extension survey of a load feature rerating power fuse examined the power fuse deterioration removal, the cause of the deterioration of the power fuse, the front-after, and the thermal variation of the inside transformer room electric power equipment. The transformer showed an average improvement of $6[^{\circ}C]$. The temperature of the electrical line showed $7{\sim}8[^{\circ}C]$ improvement. The static condenser and direct reactor was $2{\sim}3[^{\circ}C]$ high-state maintenance the temperature and equipment syntonization relationship. In the subject of study $0.5{\sim}1.0[^{\circ}C]$ stabilizing three phase power fuse temperature differential was. Suggestion in the transformer room environment power equipment between the cause temperature happen elimination to deterioration of power fuse and temperature rise control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2747-2754
• /
• 2012

This thesis explains the development of multiple LCD system with the additional function to maximize the utilization of PC contents. The newly developed system is composed of host LCD and slave LCD. Host LCD decodes and outputs the image and voice of NTSC, PAL, SECAM signals. It also converts the decoded signals into LVDS signals before transmitting them to slave LCD stage. In addition, the installation of CF Memory and USB Memory helps display multi-media data. Unlike the host LCD, since not including the tuner and memory part, the slave LCD can't receive TV signals and play video signals. It only has the function to receive LVDS image signals and display on a LCD panel. This newly developed multi-LCD system has competitiveness in various aspects. With its simple structure, the failure rate, price and display power are relatively low due to its simplification of the control part. It has price and functional competitiveness as the product whose host LCD can control the entire slave LCD in terms of channel, volume, and video output.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2341-2347
• /
• 2016

In this paper, we implement monitoring system for grain sorting using a high-speed FPGA and embedded LINUX. The proposed system is designed by base on web server and web-based applications while existing system was designed by base on stand-alone mode.The interface the Web server with high speed hardware of FPGA is designed on the implemented monitoring system. The proposed system has the advantages of multi-tasking on Linux web server and real-time high speed on FPGA also. The control logic of a high speed rate line-scan CCD camera, the method of center of gravity, HSL decoding and the interface on the Web server are implemented in FPGA. The implemented monitoring system has the advantage of being able to control the grain monitoring, system failure and recovery remotely by web application. As a result, we can upgrade the performance of sorting quality compared by existing system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.2
• /
• pp.141-155
• /
• 1993

Thermodynamic properties of R-32 are calculated and its refrigeration performance is evaluated for the purpose the feasibility study of replacing R-22 with R-32. (1) Refrigeration effect of R-32 is superior to that of R-22 because heat of evaporation of R 32 is about 50% higher than that of R-22. However, COP of R-32 system is 10-30% lower than that of R-22 system. It is mainly attributed to the vapor pressore of R-32 being about 62% higher than R-22. (2) Since the pressure ratio and the specific heat ratio of R-32 system is higher than those of R -22, compressor discharging temperature rises as high as to $130-150^{\circ}C$. It may cause mechanical failure of compressor due to the breakdown of lubricant. Compressor should be improved to lower the temperature if R-32 is to replace R-22. (3) Averaged two-phase heat transfer coefficient of R-32 is about 10-20% higher than that of R-22. It may assume better heat exchanger effectiveness but not guarantee the better COP of R-32 system than R-22. (4) The high vapor pressure is the first reason to drop R-32 out of the line of R-22 alternative refrigerant. So, refrigerant mixtures based on R-32 are recommended to adjust the vapor pressure first and keep superior volumetric capacity of R-32.

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.135-142
• /
• 2006

Objectives : On-Bi-Tang(OB) has been prescribed Chinese traditional medicine for the treatment of inflammatory disease such as chronic renal failure. In this study, we investigated the anti-inflammatory effect of OB extract in the BV2 murine microglial cells. Methods : After the water extract of OB was treated in BV2 cells, murine microglial line, the cell viability was measured by MTT assay. The production of nitric oxide (NO) and $TNF-{\alpha}$ was determined based on Griess reagent and enzyme linked immunosorbant assay (ELISA). mRNA expression of inducible nitric oxide synthase (iNOS) and $TNF-{\alpha}$ was analyzed by RT-PCR. Results : OB extract significantly inhibited the LPS-induced production of NO and TNF-a in BV2 cells. OB extract also suppressed the mRNA expression of iNOS and $TNF-{\alpha}$ in BV2 cells activated with LPS. Conclusion : These data suggests that OB extract may have the anti-inflammatory effect through the modulation of NO production and inflammatory cytokine such as $TNF-{\alpha}$.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.31-39
• /
• 2007

To perform on-line cyber education, it is indispensable to delivery contents file to participant users. When users' requests occur simultaneously in a shot period, server falls into overload phase. A common to avoid overload is a software solution based on P2P, which does no cost any additional expense. But, in this solution, it yields many problems such as service delay and system failure because of peer self-control. In this paper we propose an efficient load balancing policy based on P2P system. which is the contents delivery system for cyber education system using idle computing power in the proposed solution, we present server selection scheme called P2P-Pattern method, which results in minimum service delay. we can see that our scheme outperforms previous scheme.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.199-210
• /
• 2003

The development of strain localization within shear zones is frequently observed during soil deformation. In fact, the phenomenon appears to be more often the norm rather than the exception. Conceptually, any soil condition that renders negative work increment is prone to localization. In this study, a broad range of soil and loading conditions are investigated to test this criterion, including: dilative soil subjected to drained shear (standard case), contractive soil sheared under undrained conditions, cavitation in dilative soil in undrained shear, inhomogeneous soils, particle alignment in contractive soils made of platy particles, soils that experience particle crushing, and the shear of low-moisture and/or lightly cemented loose soils. Unique specimens and test procedures are designed to separately test each of these soil conditions in the laboratory According to experimental test results, soil specimens with post-peak strain softening behavior are prone to progressive failure, localization of deformations, and shear banding. The state of stress, the soil density, inherent mechanical and geometrical properties of soil particles, low water content, and heterogeneity can contribute to triggering strain localization. Considering all possible cases of localization, the best method to obtain the critical state line in the laboratory is to use contractive homogeneous specimens subjected to drained shear.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.12
• /
• pp.71-83
• /
• 1996

This paper describes facial component detection and skew correction algorithm for face recognition. We use a priori knowledge and models about isolated regions to detect eye location from the face image captured in natural office environments. The relations between human face components are represented by several rules. We adopt an edge detection algorithm using sobel mask and 8-connected labelling algorith using array pointers. A labeled image has many isolated components. initially, the eye size rules are used. Eye size rules are not affected much by irregular input image conditions. Eye size rules size, and limited in the ratio between gorizontal and vertical sizes. By the eye size rule, 2 ~ 16 candidate eye components can be detected. Next, candidate eye parirs are verified by the information of location and shape, and one eye pair location is decided using face models about eye and eyebrow. Once we extract eye regions, we connect the center points of the two eyes and calculate the angle between them. Then we rotate the face to compensate for the angle so that the two eyes on a horizontal line. We tested 120 input images form 40 people, and achieved 91.7% success rate using eye size rules and face model. The main reasons of the 8.3% failure are due to components adjacent to eyes such as eyebrows. To detect facial components from the failed images, we are developing a mouth region processing module.