• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2810-2818
• /
• 2009

본 연구는 화강풍화토로 구성된 절토사면에서 얕은파괴의 특성을 규명하고자 우리나라의 강우특성에 따른 한계투수계수를 산정하고, 국내에 분포하는 화강풍화토의 대표적 물성을 기준으로 절토사면의 파괴면까지의 수평거리, 사면의 경사각, 사면높이 그리고 강우로 인한 포화깊이 등에 따른 안정해석을 수행하여 그 결과를 분석하였다. 한계투수계수를 분석한 결과 국내의 지역별 강우특성을 고려한 최대 한계투수계수가 $7.16{\times}10^{-4}cm/sec$의 값으로 나타났다. 최대 한계투수계수 이하의 값을 갖는 국내의 화강풍화토로 구성된 절토사면에서 한계강우강도 이하의 강우가 최소 강우지속시간보다 오랫동안 지속될 때에는 포화깊이에 따른 얕은파괴의 검토가 고려되어져야 할 것으로 판단되었다. 또한, 가상파괴면이 발생하는 수평거리, 포화깊이, 강도정수 변화에 따른 사면안전율의 변화관계를 통해 절토사면의 얕은파괴 특성을 파악 할 수 있었다.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.301-318
• /
• 2017

Based on the existing research results, a three-dimensional failure mechanism of tunnel face was constructed. The dynamic seismic effect was taken into account on the basis of quasi-static method, and the nonlinear Mohr-Coulomb failure criterion was introduced into the limit analysis by using the tangent technique. The collapse pressure along with the failure scope of tunnel face was obtained through nonlinear limit analysis. Results show that nonlinear coefficient and initial cohesion have a significant impact on the collapse pressure and failure zone. However, horizontal seismic coefficient and vertical seismic proportional coefficient merely affect the collapse pressure and the location of failure surface. And their influences on the volume and height of failure mechanism are not obvious. By virtue of reliability theory, the influences of horizontal and vertical seismic forces on supporting pressure were discussed. Meanwhile, safety factors and supporting pressures with respect to 3 different safety levels are also obtained, which may provide references to seismic design of tunnels.

• Geomechanics and Engineering
• /
• 제6권1호
• /
• pp.17-31
• /
• 2014

This paper investigates the development of failure surfaces induced by an embankment on soft marine clay deposits and the characteristics of such surfaces through numerical simulations and its comparative study with monitoring results. It is well known that the factor of safety of embankment slopes is closely related to the vertical loading, including the height of the embankment. That is, an increase in the embankment height reduces the factor of safety. However, few studies have examined the relationship between the lateral movement of soft soil beneath the embankment and the factor of safety. In addition, no study has investigated the distribution of the pore pressure coefficient B value along the failure surface. This paper conducts a continuum analysis using finite difference methods to characterize the development of failure surfaces during embankment construction on soft marine clay deposits. The results of the continuum analysis for failure surfaces, stress, displacement, and the factor of safety can be used for the management of embankment construction. In failure mechanism, it has been validated that a large shear displacement causes change of stress and pore pressure along the failure surface. In addition, the pore pressure coefficient B value decreases along the failure surface as the embankment height increases. This means that the rate of change in stress is higher than that in pore pressure.

• 한국방재학회 논문집
• /
• 제10권5호
• /
• pp.135-141
• /
• 2010

본 연구에서는 우수관의 조도계수의 변화에 따른 성능불능확률을 산정할 수 있는 신뢰성 모형이 개발되었다. 조도계수는 우수관의 토사의 적체에 따라 다시 산정되었으며 새로운 조도계수를 이용하여 신뢰성 해석이 수행되었다. 해석결과, 우수관에 적체되는 토사의 깊이가 증가함에 따라 우수관의 용량은 크게 감소하고 성능불능확률은 크게 증가함을 알 수 있었다. 본 연구에서는 우수관에 적체되는 토사의 깊이에 따라 산정된 조도계수를 사용한 신뢰성 모형을 대구와 전주에 적용하였다. 원형 우수관에 적체된 토사의 깊이가 증가할수록 우수관의 조도계수는 커지고 성능불능확률도 역시 크게 증가 하는 것을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제33권6호
• /
• pp.401-409
• /
• 2020

확률론적 지진취약도 평가는 구조물 혹은 기기의 손상확률을 각 취약도 변수별 조합을 통해 이루어진다. 지진취약도로부터 구해지는 2개 이상 기기의 동시손상확률 계산은 기존에는 각 기기의 손상확률을 독립으로 가정해 왔다. 하지만 기기별 손상확률에 상관성이 있으며, 이를 평가한 결과 상관성에 따라 동시손상확률이 변화할 수 있는 결과를 보였다. 이 지진상관성을 무시하면 비보수적인 결과가 나오고 따라서 이를 고려해서 계산되어야 한다. 이 연구에서는 지진상관계수를 해석적으로 평가하기 위해 몇 가지 확률 변수를 선정하여 각 변수별로 혹은 통합하여 평가하고 그 차이를 비교했다. 그리고 단순화된 모델과, 복잡한 모델에 대한 상관계수 차이도 비교하였다. 이들 방법에 따른 상관계수의 결과와 차이를 분석했다. 그 결과 각 변수별로 평가하는 것과 통합하여 평가할 때 변수별 영향의 차이에 따라 상관성이 변화함을 확인하였고, 모델이 단순할수록 상관성이 높아짐을 확인하였다.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.631-640
• /
• 2024

In the traditional slope stability analysis, ignoring the spatial variability of slope soil will lead to inaccurate analysis. In this paper, the K-L series expansion method is adopted to simulate random field of soil strength parameters. Based on Random Limit Equilibrium Method (RLEM), the influence of variation coefficient and fluctuation range on reliability of soil slope supported by micro-pile is investigated. The results show that the fluctuation ranges and the variation coefficients significantly influence the failure probability of soil slope supported by micro-pile. With the increase of fluctuation range of soil strength parameters, the mean safety factor of the slope increases slightly. The failure probability of the soil slope increases with the increase of fluctuation range when the mean safety factor of the slope is greater than 1. The failure probability of the slope increases by nearly 8.5% when the fluctuation range is increased from δ_v=2 m to δ_v =8 m. With the increase of the variation coefficient of soil strength parameters, the mean safety factor of the slope decreases slightly, and the probability of failure of soil slope increases accordingly. The failure probability of the slope increases by nearly 31% when the variation coefficient increases from COV_c=0.2, COV_φ=0.05 to COV_c=0.5, COV_φ=0.2.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.967-973
• /
• 2021

In 2011, an earthquake and subsequent tsunami hit the Fukushima Daiichi Nuclear Power Plant, causing simultaneous accidents in several reactors. This accident shows us that if there are several reactors on site, the seismic risk to multiple units is important to consider, in addition to that to single units in isolation. When a seismic event occurs, a seismic-failure correlation exists between the nuclear power plant's structures, systems, and components (SSCs) due to their seismic-response and seismic-capacity correlations. Therefore, it is necessary to evaluate the multi-unit seismic risk by considering the SSCs' seismic-failure-correlation effect. In this study, a methodology is proposed to obtain the seismic-response-correlation coefficient between SSCs to calculate the risk to multi-unit facilities. This coefficient is calculated from a probabilistic multi-unit seismic-response analysis. The seismic-response and seismic-failure-correlation coefficients of the emergency diesel generators installed within the units are successfully derived via the proposed method. In addition, the distribution of the seismic-response-correlation coefficient was observed as a function of the distance between SSCs of various dynamic characteristics. It is demonstrated that the proposed methodology can reasonably derive the seismic-response-correlation coefficient between SSCs, which is the input data for multi-unit seismic probabilistic safety assessment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.269-273
• /
• 1998

The failure of material structures or mechanical system is considered as a direct or indirect result of fatigue. In the design of mechanical structure for estimating of reliability, the prediction of failure life is the most important failure mode to be considered. However, because of a complicated behavior of fatigue in mechanical structure, the analysis of fatigue is in need of much researches on life prediction. This document presents a prediction of fatigue life of the SAPH45 steel, which is extensively for vehicle frame. The method using lethargy coefficient and stress distribution factor at pediction of fatigue life based on the consideration of the failure characteristics from the tensile test should be provided in this study.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 International Symposium
• /
• pp.79-94
• /
• 2002

Root cause -Thermal expansion coefficient mismatch -Tape warpage -Initial die crack (die roughness) Guideline for failure prevention -Optimized tape/Substrate design for minimizing the warpage -Fine surface of die backside Root cause -Thermal expansion coefficient mismatch - Repetitive bending of a signal trace during TC cycle - Solder mask damage Guideline for failure prevention - Increase of trace width - Don't make signal trace passing the die edge - Proper material selection with thick substrate core Root cause -Thermal expansion coefficient mismatch -Creep deformation of solder joint(shear/normal) -Material degradation Guideline for failure Prevention -Increase of solder ball size -Proper selection of the PCB/Substrate thickness -Optimal design of the ball array -Solder mask opening type : NSMD -In some case, LGA type is better

• Computers and Concrete
• /
• 제4권2호
• /
• pp.119-134
• /
• 2007

External bonding of steel or FRP plates to reinforced concrete (RC) structures has been a popular method for strengthening RC structures; however, unexpected premature failure often occurs due to debonding between the concrete and the epoxy. We proposed a Coulomb criterion with a constant failure surface as the debonding failure criterion for the concrete-epoxy interface. Diagonal shear bonding tests were conducted to determine the debonding properties that were related to the failure criterion, such as the angle of internal friction and the coefficient of cohesion. In addition, an interface element that utilized the Coulomb criterion was implemented in a nonlinear finite element analysis program to simulate debonding failure behavior. Experimental studies and numerical analysies on RC beams strengthened by an externally bonded steel or FRP plate were used to determine the range of the coefficient of cohesion. The results that were presented prove that premature failure loads of strengthened RC beams can be predicted with using the bonding properties and the finite element program with including the proposed Coulomb criterion.