• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.428-437
• /
• 2007

Along with the development of network, more and more functions and services are required by users, while traditional network fails to support all of them. Although overlay is a good solution to some demands, using them in an efficient, scalable way is still a problem. This paper puts forward a framework on how to construct an efficient, scalable overlay mesh in real network. Main differences between other overlays and ours are that our overlay mesh processes some nice features including class-of-service(CoS) and traffic engineering(TE). It embeds the end-to-end optimal traffic control law which can distribute traffic in an optimal way. Then, an example is given for better understanding the framework. Particularly, besides good scalability, and failure recovery, it possesses other characteristics such as routing simplicity, self-organization, etc. In such an overlay mesh, an applicable source routing scheme called hierarchical source routing is used to transmit data packet based on UDP protocol. Finally, a guideline derived from a number of simulations is proposed on how to set various parameters in this overlay mesh, which makes the overlay more efficient.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.30-35
• /
• 2008

This paper describes a fault detection and diagnosis (FDD) system developed for the heat source apparatus in building air-conditioning system. As HVAC&R systems in building become complex and instrumented with highly automated controllers, the processes and systems get more difficult for the operator to understand and detect the mal-functions. Poorly maintained, degraded, and improperly controlled equipment wastes an estimated 15% to 30% of energy used in commercial building. When operating a complex facility, FDD system is beneficial in equipment management to provide the operator with tools which can help in decision making for recovery from a failure of the system. Automated FDD for HVAC&R system has the potential to reduce energy and maintenance costs and improves comfort and reliability. Over the last decade there has been considerable research for developing FDD system for HVAC&R equipment. However, they are being made too much of a theoretical study, so only a small of FDD methods are deployed in the field. This study deduced an actual defect source for the heat source apparatus and suggested a low price FDD method which is ready to be deployed in the field.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.2
• /
• pp.1-18
• /
• 2004

Due to the change to the digital environments, the offer of services on the on-tine differs from one on the on-line. This paper Identifies what functions internet business organizations should fulfill to provide on-line services of good qualify and analyzes whether these functions lead effectively to the expected performance of Internet business firms. The components of service orientation in the Internet business organizations appear to be the servant leadership, customer treatment from the Internet service encounter, Internet service failure prevention and recovery, Internet service standards communication, Internet service training, and internet service rewards. Therefore, these determinants should be incorporated in the practices, Procedures, end routines of Internet business organizations in order to create and provide excellent Internet services. Furthermore, it is demonstrated that Internet service orientation has a significant effect on satisfaction by employees and customers, the value and quality of Internet service, and the firm's performance. This implies that the service orientation is an Important factor In the on-line service organizations and that the internet business can be successful when the service orientation is diffused throughout the firm's organizations. It is also shown that the important factors, which connect Internet service orientation and its performance, are the service quality, value of Internet service and customer satisfaction. That is, the service orientation can ultimately lead to the corporate performance when customers are satisfied after confirming the value and quality of Internet service by visiting the web site.

• Journal of Information Technology Applications and Management
• /
• v.14 no.3
• /
• pp.95-113
• /
• 2007

To minimize IT operational risks and the opportunity cost for lost business hours. it is necessary to have preparedness in advance and mitigation activities for minimization of a loss due to the business discontinuity. There are few cases that banks have a policy on systematic management, system recovery and protection activities against system failure. and most developers and system administrators response based on their experience and the instinct. This article focuses on the mitigation model development for minimizing the incidents of disk unit in IT operational risks. The model will be represented by a network model which is composed of the three items as following: (1) the risk factors(causes, attributes and indicators) of IT operational risk. (2) a periodic time interval through an analysis of historical data. (3) an index or an operational regulations related to the examination of causes of an operational risk. This article will be helpful when enterprise needs to hierarchically analyze risk factors from various fields of IT(information security, information telecommunication, web application servers and so on) and develop a mitigation model. and it will also contribute to the reduction of operational risks on information systems.

• Structural Engineering and Mechanics
• /
• v.42 no.6
• /
• pp.799-813
• /
• 2012

Five two-span reinforced concrete (RC) slabs and seven two-span RC beams were tested under the ISO 834 standard fire with different durations. CFRP strengthening was then applied to some of the specimens after the damaged concrete was removed from the specimens and replaced with polymer mortar. All the specimens were loaded to failure to investigate the influence of fire-damage and the effectiveness of strengthening methods. Test results indicated that the flexural capacities of specimens decrease with the fire duration increases. Moreover, fire exposure had more significant effect on the flexural rigidity than on the bearing capacity of the specimens. After rehabilitation, the bearing capacities of specimens reached or even exceeded that of the reference RC specimen, and the strengthening methods seemed to have limited effect on flexural rigidity recovery. From the analysis of moment redistribution of tested beams, elevated temperature is found having different impacts on sagging moment region and hogging moment region. The damage of RC continuous member is definitely a comprehensive response of different regions.

• Explosives and Blasting
• /
• v.24 no.2
• /
• pp.75-82
• /
• 2006

Most of limestone mines in Korea have been developed by a open-cut mining method in consideration of a deposited condition of ore, ore recovery, safety, economic efficiency, etc.. But it has produced environmental problems such as dust flying, blasting noise & vibration, and spoil of farmlands due to slope failure of waste rock mass caused by access road construction, fragmentation & crush of rocks, blasting, transportation, and mineral processing. In this study, it has been suggested for measures to reduce mine hazards caused by open- cut mining of limestone nines.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.770-778
• /
• 2012

In this paper, we propose a multi-path construction scheme to improve the survivability of a multicast session in military hybrid networks. A military hybrid network consists of a static backbone network and multiple mobile stub networks where some nodes are frequently susceptible to be disconnected due to link failure and node mobility. To improve the survivability of multicast sessions, we propose a construction scheme of ${\kappa}$ redundant multi-paths to each receiver. In order to take account of different characteristics of static and mobile networks, we propose quite different multi-path setup approaches for the backbone and stub networks, respectively, and combine them at the boundary point called gateway. We prove that our proposed scheme ensures that each receiver of a multicast session has ${\kappa}$ redundant paths to the common source. Through simulations, we evaluate the performance of the proposed schemes from three aspects : network survivability, recovery cost, and end-to-end delay.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.427-430
• /
• 2008

The influence of subsequent annealing treatment on the dynamic deformation and the fracture behavior of submicrocrystalline Al-4.4%Mg alloy is investigated in this study. After inducing an effective strain of 8 via equal-channel angular pressing at $200^{\circ}C$, most of the grains are considerably reduced to nearly equiaxed grains of $0.3{\mu}m$ in size. With an increment of various subsequent heat treatments for 1 hour, resultant microstructures are found to be fairly stable at temperatures up to $200^{\circ}C$, suggesting that static recovery will be dominantly operative, whereas grain growth is pronounced above $250^{\circ}C$. The results of tensile tests show that yield and ultimate tensile strength decrease, but elongation-to-failure and strain hardening rate increase with an increase in annealing temperatures. The dynamic deformation and the fracture behavior retrieved with a series of torsional tests are explored with respect to annealed microstructures. Such mechanical response is analyzed in relation to resultant microstructure and fracture mode.

• Parasites, Hosts and Diseases
• /
• v.53 no.2
• /
• pp.233-236
• /
• 2015

A total 7 outbreaks of trichinellosis have occurred in Korea, mostly as a result of consumption of raw wild boar (Sus scrofa) meat. Since only 1 serological survey on wild boars had yet been performed in Korea, the present study aimed to estimate the prevalence of trichinellosis in wild boars and some species of rodents by artificial digestion and serological examinations in Yanggu-gun, Gangwon-do, the endemic area of trichinellosis. Both the wild boar and rodent muscle samples revealed no Trichinella larvae by direct examination and artificial digestion method. However, serological examinations revealed that 4 wild boar sera samples out of 118 (3.4%) were positive to Trichinella antigen. Although the recovery of Trichinella larvae ended in a failure, it is proved for the first time that the sylvatic cycle of Trichinella has been maintained in wild boars of Gangwon-do, Korea.