• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.17-41
• /
• 1996

In the situation of rapid industrialization based on the lopsided development of economy since 1960, Korean rural society has faced a crisis of disruption. As a result, the civilian government has tried a few actions to change the circumstance. However, it is said that the coral polices were not satisfactory. Those who were concerned with the rural problems of these days argue that it is necessary to adopt new policies and further to change the policymakers` philosophies concerning the matter. The arguments are certainly based on the beliefs that the sound policies come from the sound philosophies. This study aims to analyze the existing rural polices and their policymakers` philosophies and to design of a new paradigm. For the purpose, this study was set there specific objectives: First, to overview the moor points of Quantitative Utilitarianism of Jeremy Bentham and the Social Justice Theory of John Rawls, the contrasting frameworks of the moral philosophies; Second, to trace the major or trade of the rural policies since 1960s in Korea; Third, to analyze the policymakers` philosophies reflected on the rural policies; Fourth, to design a new paradigm of the rural policies. This study mainly adopted descriptive method based on the various source of government and non-government statistics, white papers and other researches. The major findings of this study may be summarized as follows: 1. The historical epochs of the rural policies in Korea was divided into the periods: (1) An organizational and institutional establishment for self-reliance of main crops and the New Village Movement $(1969{\sim}70)$; (2) An initiation of `open-door` policies to the foreign farm products $(1970{\sim}80)$; (3) Completion of the UR meetings and the recommendations of the Rural and Fishery Development Commission (1980-present). 2. It was found that the philosophical foundations of coral policies were directly reflected from the utilitarianism of the national development. Under the philosophy it was the modem sector of economy that was to spearhead the national development, and the rural sector was situated to the peripheral position and hardly in the spot-light. Therefore, it may be said that the present situation of the rural society was largely rooted in the model of economic development. 3. As a new direction of the coral policies, many studies were focussing on the NTC (non-trade concerns) functions of agriculture for the present and future society. The researchers argue that the cost of protecting and supporting agriculture and rural society may be higher than that of the burden which the nation should be bear in the case of failure of agriculture. Although it tray be true, however, it should be noted that the argument is another type of utilitarianism which prevailed in the past. As a philosophy of rural policies, utilitarianism is straight forward and persuasive, however, it has also limitations in terms of relativism in broad sense or social justice in specific manna. 4. This study suggests to set the philosophical foundations of rural policies on the basis of Rawl`s Theory of Justice mentioned earlier. It emphasizes the inviolability of social justice which was neglected for the national benefits timing the period of development dictatorship in 1960s and 1970s. The principles of social justice for coral people were identified as twofold; (1) The principle of the t equal liberty; (2) (a) Difference principle, (b) The principle of fair equality of opportunity.

• Korean Journal of Social Welfare
• /
• v.1
• /
• pp.51-71
• /
• 1979

During last five years several workshops and seminars among social work educators, in and out country, has taken place. In those gatherings there has been, criticism on American model on which curriculum of social work in Korea has mainly based, and many proposals which most developing countries should consider and adopt for developing their own curriculums. The proposals could be summarized as follows; 1. Specification of developmental functions of social work should be made so that the curriculum could involve. It also must come from own societal needs and own national development task. 2. Social work should participate and make contribution to plan and solve the main social problems in own countries. 3. Clarification of educational objective in undergraduate level should be made and one of them must be related to the first professional degree. 4. There should be the courses which provide the content of macro level participation. How much of the proposals are reflected in the current curriculum of Korea? What are the problems Korean social work education has been faced in connection with reflecting the proposals? What kinds of task we should or could perform in order to adopt the proposals? These are the questions which deserved to be studied. The followings are the answers to the questions; 1. The new courses such as social welfare policy and planning, Social Development, Population Dynamics and Family Planning, Social problems, Special Issues in Social Welfare, etc, are placed in the curriculum. 2. Though the new courses are added the courses of case work, group work, and community organization are strongly remained it means that integrative method is not quite adopted and that conflicts are taking place between new and old fashion. 3. Fieldwork placement policy has been changes from concurrent to block and from social work method oriented to social problem oriented. 4. There are lack of integration among the all courses, of consistency between pre and post courses and connection among the related courses. 5. Establishment of image of social worker with B, A. degree should be urgently taken place. It can't be done by social work field alone but by cooperation with all the forces related to the social work practice. 6. B. A. graduate should have a common base of knowledge and competence. It could be come from the clear and specified objectives of undergraduate level education. And agreement among the member schools on the objectives can call on the fundamental similarities in each curriculums. Different programs from one school to another can be tolerated as long as there are fundamental similarities among the schools. Basic concepts and framework of social work should be kept clearly. It is a slow and long process to make social work recognized as a profession in the developing countries. Korea can't be and exception. Failure of having social work be indegenous can't be the reason to refuse an change the basic concepts of social work. One of he most important task which social work education in Korea must achieve in the near future is to establish the minimum requirement courses in the curriculum. Social work field, on the other hand, must find the positions for the social works in the various settings and institute. Clear role and image of social worker can be obtained by doing that.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.237-249
• /
• 2007

This study was performed to evaluate the effect of membrane exposure on new bone formation when guided bone regeneration with perforated titanium membrane on atrophic alveolar ridge. The present study attempted to establish a GBR model for four adult beagle dog premolar. Intra-marrow penetration defects were created on the alveolar ridge(twelve weeks after extraction) on the mandibular premolar teeth in the beagle dogs. Space providing perforated titanium membrane with various graft material were implanted to provide for GBR. The graft material were demineralized bovine bone(DBB), Irradiated cancellous bone(ICB) and demineralized human bone powder(DFDB). The gingival flap were advanced to cover the membranes and sutured. Seven sites experienced wound failure within 2-3weeks postsurgery resulting in membrane exposure. The animals were euthanized at 4 weeks postsurgery for histologic and histometric analysis. The results of this study were as follows: 1. There was little new bone formation at 4 weeks postsurgery. irrespectively of membrane exposure. 2. There was significant relationship between membrane exposure and bone graft resorption(P<0.05), but no relation between membrane exposure and infiltrated connective tissue. 3. There was much bone graft resorption on DFDB than ICB and DBB. 4. The less exposure was on the perforated titanium membrane, the more dense infiltrated connective tissue was filled under the membrane when grafted with ICB and DBB. but there was no relationship between the rate of membrane exposure and the percentage of infiltrated connective tissue area and no relationship between the percentage of the area in the infiltrated connective tissue and in the residual bone graft. Within the above results, bone formation may be inhibited when membrane was exposed and ICB and DBB were more effective than DFDB as a bone graft material when guided bone regeneration.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.825-838
• /
• 2007

Endosseous implants are used in the treatment of various types of tooth loss, and numerous long-term studies have demonstrated the excellent reliability of this method of treatment. However, the increase of implant failure are associated with inadequate quality and/or height of bone. At the end of the 1980s, Wide(>3.75mm) implants were initially used for managing these difficult bone situations. The recommended indications for its use included poor bone quality, inadequate bone height. immediate placement in fresh extraction sockets, and immediate replacement of failed implants. At the 2000s, wider implants(6.0mm and 6.5mm) were used in a few studies. Although good clinical outcomes have been reported in recent years, there is still a controversy on this topic. Therefore, the purpose of this study was to estimate the survival rate of wide implants($6.0{\sim}8.0mm$) in molar regions, evaluating the clinical outcome. In this study, 1135 RBM surfaced wide implants($Rescue^{TM}$, MEGAZEN Co., Korea/595 maxillary, 540 mandibular) were placed in 650 patients(403 male, 247 female/age mean: $51.2{\pm}11.1$ years, range 20 to 83 years). Of the total, 68.3% were used to treat fully or partially edentulous situations, including single-tooth losses and 31.7% were placed immediately after teeth extraction or removal of failed implants, of which all were in the molar regions. Implant diameter and length ranged from 6.0 to 8.0mm and from 5.0 to 10.0mm respectively. The implants were followed for up to 42 months (mean: $14.6{\pm}9.5$ months). Of 1135 placed implants, 58 implants were lost. Among them, 53 implants were lost within 12 months after implant placement. The survival rate was 93.6% in the maxilla and 96.3% in the mandible, yielding an overall survival rate of 94.9%, for up to 42 months. As the result of Cox regression model, prosthetic type, sinus graft, and patient gender have an statistical significance on the implant survival rate in this study. This study suggests that the use of wide implants($6.0{\sim}8.0mm$) would provide a predictable treatment alternative in posterior areas.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.37-44
• /
• 1999

Because of bone resorption, wear of ultra-high molecular weight polyethylene(UHMWPE) in total knee arthroplasty has been recognized as a major factor in long-term failure of knee implant. The surface damage and the following harmful wear debris of UHMWPE is largely related to contact stress. Most of the previous studies focused on the contact condition only at the articulating surface of UHMWPE. Recently, contact stress at the metal-backing interface has been implicated as one of major factors in UHMWPE wear. Therefore, the purpose of the is study is to investigate the effect of the contact stress for different thickness, conformity friction coefficient, and flexion degree of the UHMWPE component in total knee system, considering the contact conditions at both interfaces. In this study, a two-dimensional non-linear plane strain finite element model was developed. The results showed that the maximum value of von-Mises stress occurred below the articulating surface and the contact stress was lower for the more conforming models. All-polyethylene component showed lower stress distribution than the metal-backed component. With increased friction coefficient on the tibiofemoral contact surface, the maximum shear stress increased about twofold.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.541-549
• /
• 2008

The fatigue analysis is performed to avoid structural failure in aerospace structures under repeated loads. In this paper, the fatigue life is estimated for the design of tilt rotor UAV. First of all, the fatigue load spectrum for tilt rotor UAV is generated. Fatigue analysis is done for the flaperon joint which may have FCL(fracture critical location). Tilt rotor UAV operates at two modes: helicopter mode such as taking off and landing; fixed wing mode like cruising. To make overall fatigue load spectrum, FELIX is used for helicopter mode and TWIST is used for fixed wing mode. The other hand, the Kriging meta model is used to get S-N regression curve for whole range of material life when S-N test data are analyzed. And then, the second order of S-N curve is accomplished by the least square method. In addition, the coefficient of determination method is used to ensure how accuracy it has. Finally, the fatigue life of flaperon joint is compared with that obtained by MSC. Fatigue.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.1
• /
• pp.43-53
• /
• 2014

A single plate connection(SPC) consists of a plate welded to the columns and bolts connected to the beam web. The SPC is widely used for a simple shear connection of steel structure because it is easy-to-fabricated, easy-to-installed and economical. The conventional SPC is used for 2 to 12 bolts in a single vertical row. It is designed to limit the plate thickness by bolt diameter to obtain flexible and ductile connections. The design strength for eccentric shear shall be the lesser of the shear strength of bolts or bearing strength of plate and when the design strength is decided by edge distance failure, the results can be very conservative. Although the research on special solution for 'weak-plate/strong-bolt' model with 2 to 4 bolts has been conducted by L. S. Muir, and W. A. Thonton, 2004, study on generalized design procedures did not conduct. This study proposed design procedure for evaluation of the design strength of eccentric shear bolt groups on a single plate connection based on the actual edge distance and the direction of bolt reaction forces by using elastic vector method(EVM) and instantaneous center of rotation method(ICM).

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2008

response surface method (RSM) is widely used to evaluate th e extremely smal probability of ocurence or toanalyze the reliability of very complicated structures. Althoug h Monte-Carlo Simulation (MCS) technique can evaluate any system, the procesing time of MCS dependson the reciprocal num ber of the probability of failure. The stochastic finite element method could solve thislimitation. However, it is limit ed to the specific program, in which the mean and coeficient o f random variables are programed by a perturbation or by a weigh ted integral method. Therefore, it is not aplicable when erequisite programing. In a few number of stage analyses, RSM can construct a regresion model from the response of the c omplicated structural system, thus, saving time and efort significantly. However, the acuracy of RSM depends on the dist ance of the axial points and on the linearity of the limit stat e functions. To improve the convergence in exact solution regardl es of the linearity limit of state functions, an improved adaptive response surface method is developed. The analyzed res ults have ben verified using linear and quadratic forms of response surface functions in two examples. As a result, the be st combination of the improved RSM techniques is determined and programed in a numerical code. The developed linear adapti ve weighted response surface method (LAW-RSM) shows the closest converged reliability indices, compared with quadratic form or non-adaptive or non-weighted RSMs.