• 한국토양비료학회지
• /
• 제12권1호
• /
• pp.15-23
• /
• 1979

본(本) 연구의 제(第)1보(報)에서 추출(抽出)된 비옥도(肥沃度) 구성인자(構成因子)의 인자평점(因子評点) 및 현지조사(現地調査)에서 얻은 기타(其他) 환경인자(環境因子)를, 설명변수(說明變數)로 취(取)하고, 현지(現地)에서 청취조사(聽取調査)로부터 얻어진 쌀 수확량(收穫量)을 목적변수(目的變數)로 하여 다중회귀(多重回歸) 분석(分析)과 하야시의 수량화(數量化) 이론(理論) I (Hayashi's theory of quantification No.1)를 적용(適用)하여 생산력을 추정(推定)한 결과(結果)는 다음과 같다. (1) 시료(試料) 개체(個體)에 대하여 얻어진 다섯개의 인자평점(因子評点)을 설명변수(說明變數)로 하여 다중회귀분석(多重回歸分析)을 행(行)한 결과(結果) 중상관계수(重相關係數)가 0.43으로 추정(推定) 정도(程度)가 낮았다. (2) 비옥도(肥沃度) 인자간(因子間)의 상호작용(相互作用)을 고려(考慮)하여 직선회귀(直線回歸) 모델을 이차방정식(二次方程式)으로 변형(變形)시켜 생산력(生産力)을 추정(推定)한 결과(結果) 중상관계수(重相關係數)가 0.59로써 추정정도(推定精度)는 약간 높아졌으나 만족할 수 있는 추정식(推定式)은 얻지 못하였다. (3) 답(畓) 토양(土壤)에서 쌀의 생산력(生産力)을 지배(支配)하는 인자(因子)로서 비옥도(肥沃度)는 물론(勿論) 중요(重要)하지만 다른 환경인자(環境因子)의 영향(影響)도 받을 것으로 사료(思料)되어 비옥도군(肥沃度群), 수분공급(水分供給)의 양부(良否), 토양배수(土壤排水)의 양부(良否), 기후대(氣候帶), 표토(表土)의 점착성(粘着性), 표토(表士)의 결시성(結持性), 토성(土性) 및 하층토(下層土)의 구조발달정도(構造發達程度) 등(等)을 설명변수(說明變數)도 취(取)하여 하야시의 수량화(數量化) 이론(理論) 1을 적용(適用)하여 생산력(生産力)을 추정(推定)한 결과(結果) 중상관계수(重相關係數)가 0.9였고, 이들 인자(因子)들 중(中) 비옥도군(肥沃度群), 수분공급(水分供給) 및 기후대(氣候帶) 인자(因子)가 생산력(生産力)에 크게 기여(寄與)하고 있는 것으로 나타났다.

• Tuberculosis and Respiratory Diseases
• /
• 제60권1호
• /
• pp.65-71
• /
• 2006

서론 : 대량객혈은 치료가 이루어 지지 않을 경우, 50% 이상의 사망률을 보이는 호흡기 영역의 가장 위급한 응급상황의 하나이며 여러 원인에 의해 발생 될 수 있다. 1973년 레미 등에 의해 처음 보고된 이후로 기관지동맥 색전술은 대량의 재발성 객혈의 치료로 확립되어 그 효과가 입증 되었다. 그러나 기관지동맥 색전술의 재발률은 10~52%로 보고되어 객혈의 재발을 예측 할 수 있는 위험 요소들에 대한 연구가 필요하다. 재료 및 방법 : 2000년 1월부터 2005년 1월까지 세브란스병원에 100 cc 이상의 대량 객혈로 내원하여 기관지동맥 색전술을 시행 받은 66명 환자들을 대상으로 하여 기관지동맥 색전술 후 재발의 빈도와 재발과 관련이 있는 위험 요인에 대해 분석하였다. 결과 : 5년 간 기관지동맥 색전술을 시행 받은 환자는 75명이었고, 장기간 추적관찰이 되어 결과 분석이 가능했던 환자는 66명이었다. 이들의 평균 나이는 $54.9{\pm}15.9$세이었고, 남자가 48명, 여자가 18명이었다. 원인 질환은 결핵 20명, 기관지확장증 및 기타 양성질환 23명, 악성 종양 7명이었고, 평균 20.4개월 간의 추적 관찰 기간 동안 23명(34.9%)에서 치료가 필요한 대량 객혈이 재발되었다. 환자의 성별과 나이, 이전에 객혈로 시술 받은 과거력, 객혈의 원인 질환, 분포 혈관의 수 등은 대량 객혈의 재발과 유의한 관계가 없었으나, 병변의 양측성, 흉막 비후, 객혈의 양은 유의한 인자로 관찰되었고, 로그 회귀분석 결과에서도 동일하였다. 결론 : 기관지동맥 색전술을 시행한 후 객혈의 재발을 예측할 수 있는 위험 인자로 흉막 비후, 병변의 양측성, 객혈의 양이 중요하게 작용하며, 이에 대한 대규모 임상 연구가 필요하다.

• 한국농공학회지
• /
• 제26권1호
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Restorative Dentistry and Endodontics
• /
• 제24권4호
• /
• pp.647-656
• /
• 1999

The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

• 한국석유지질학회지
• /
• 제10권1_2호
• /
• pp.23-33
• /
• 2004

칠레 남부에 분포하는 라고 소피아 역암 (후기 백악기)은 이암이 우세한 심해 퇴적층 (Cerro Toro Formation) 내에 렌즈상으로 산출하고 남북방향으로 120 km 이상 연장된다. 라고 소피아 역암은 융기대전면분지 (foreiand basin)인 마젤란 분지의 융기대전면곡분 (foredeep trough)을 따라 발달한 심해저 하도계 퇴적층으로 해석된다. 이처럼 연장이 대단히 좋은 역질의 심해저 하도가 발달하는 것은 현생 심해저 환경에서 매우 드문 현상으로 라고 소피아 역암은 퇴적학적으로 매우 흥미로운 예이다. 연구지역의 북부에 분포하는 라고 소피아 역암은 이암 퇴적층 사이에 협재하는 3-5매의 역암체로 구성되고, 고수류 측정에 따르면 퇴적물은 동, 남, 남동 방향으로 운반된 것으로 유추된다. 이 역암체는 융기대전면곡분의 서편에 위치한 해저사면을 따라 발달한 심해저 하도계의 지류에서 퇴적된 것으로 해석되며, 지류들은 남북방향의 주하도로 수렴하였을 것으로 추정된다. 남부 지역의 라고 소피아 역암은 300 m 이상의 두께를 가지는 역암체로 구성되고, 남북방향으로 긴 융기대전면분지의 축을 따라 발달한 주하도에서 퇴적된 것으로 해석된다. 이 역암체는 층리를 보이는 역암, 괴상 혹은 점이층리의 역암, 기질지지 역암으로 구성되며, 각각은 저탁류에 의한 밑짐 운반, 고밀도 저탁류, 니질 암설류에 의해 퇴적된 것으로 해석된다. 층리역암에서 측정된 고수류 방향은 남남서항으로 주하도의 방향을 지시한다. 반면, 북부 및 남부 지역의 기질지지 역암에서 측정된 고수류 방향은 흔히 하도 방향에 대해 고각도를 이루는데, 이는 하도의 둑 또는 주변 사면이 붕괴하여 니질 암설류가 형성되었음을 지시한다. 형태구성 (architecture) 분석 결과, 라고 소피아 역암은 육상의 역질 망상하천 퇴적층과 유사한 구성요소로 구성되며, 라고 소피아 심해저 하도계는 망상하천과 유사한 지형적 특성을 지녔을 것으로 추정된다. 또한 하도 역암 내 큰 규모의 층구조는 동쪽으로 이동 누적된 특징을 보이는데, 이는 지구조 운동에 의해 주하도가 점진적으로 동쪽으로 이동하였을 가능성을 시사한다.

• 기록학연구
• /
• 제1호
• /
• pp.23-76
• /
• 2000

In this paper, I examined what have been researched and determined about preservation strategy and selection of preservation media in the western archival community. Archivists have primarily been concerned with 'preservation' and 'use' of archival materials worth of being preserved permanently. In the new information era, preservation and use of archival materials were faced with new challenge. Life expectancy of paper records was shortened due to acidification and brittleness of the modem papers. Also emergence of information technology affects the traditional way of preservation and use of archival materials. User expectations are becoming so high technology-oriented and so complicated as to make archivists act like information managers using computer technology rather than traditional archival handicraft. Preservation strategy plays an important role in archival management as well as information management. For a cost-effective management of archives and archival institutions, preservation strategy is a must. The preservation strategy encompasses all aspects of archival preservation process and practices, from selection of archives, appraisal, inventorying, arrangement, description, conservation, microfilming or digitization, archival buildings, and access service. Those archival functions should be considered in their relations to each other to ensure proper preservation of archival materials. In the integrated preservation strategy, 'preservation' and 'use' should be combined and fulfilled without sacrificing the other. Preservation strategy planning is essential to determine the policies of archives to preserve their holdings safe and provide people with a maximum access in most effective ways. Preservation microfilming is to ensure permanent preservation of information held in important archival materials. To do this, a detailed standardization has been developed to guarantee the permanence of microfilm as well as its product quality. Silver gelatin film can last up to 500 years in the optimum storage environment and the most viable option for permanent preservation media. ISO and ANIS developed such standards for the quality of microfilms and microfilming technology. Preservation microfilming guidelines was also developed to ensure effective archival management and picture quality of microfilms. It is essential to assess the need of preservation microfilming. Limit in resources always put a restraint on preservation management. Appraisal (and selection) of what to be preserved was the most important part of preservation microfilming. In addition, microfilms with standard quality can be scanned to produce quality digital images for instant use through internet. As information technology develops, archivists began to utilize information technology to make preservation easier and more economical, and to promote use of archival materials through computer communication network. Digitization was introduced to provide easy and universal access to unique archives, and its large capacity of preserving archival data seems very promising. However, digitization, i.e., transferring images of records to electronic codes, still, needs to be standardized. Digitized data are electronic records, and st present electronic records are very unstable and not to be preserved permanently. Digital media including optical disks materials have not been proved as reliable media for permanent preservation. Due to their chemical coating and physical character using light, they are not stable and can be preserved at best 100 years in the optimum storage environment. Most CD-R can last only 20 years. Furthermore, obsolescence of hardware and software makes hard to reproduce digital images made from earlier versions. Even if when reformatting is possible, the cost of refreshing or upgrading of digital images is very expensive and the very process has to be done at least every five to ten years. No standard for this obsolescence of hardware and software has come into being yet. In short, digital permanence is not a fact, but remains to be uncertain possibility. Archivists must consider in their preservation planning both risk of introducing new technology and promising possibility of new technology at the same time. In planning digitization of historical materials, archivists should incorporate planning for maintaining digitized images and reformatting them in the coming generations of new applications. Without the comprehensive planning, future use of the expensive digital images will become unavailable. And that is a loss of information, and a final failure of both 'preservation' and 'use' of archival materials. As peter Adelstein said, it is wise to be conservative when considerations of conservations are involved.

• 수산해양기술연구
• /
• 제57권1호
• /
• pp.57-68
• /
• 2021

In order to collect basic data for the improvement of fishing systems in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 on the basic items of coastal improved stow net fishery and safety accidents that occurred during fishing operation. The questionnaire for the survey on the actual conditions of coastal improved stow net fishery consisted of a survey on basic matters (six questions) and a questionnaire (six questions) on safety accidents occurring during fishing operation. The results of the survey on basic items were analyzed by region (Incheon, Seocheon, Gunsan and Mokpo), by the captain's age (less than 50 years of age, 50 to 60 years and more than 60 years of age), by the captain's career (less than 20 years, 20 to 30 years, 30 to 40 years and more than 40 years) and by the age of fishing vessel (less than 10 years, 10 to 20 years and more than 20 years). According to the survey on basic items of coastal improved stow net fishery such as the captain's age, the captain's career, the age of fishing vessel, the fishing nets in use, the crews on board and the operation days per voyage by region, the average captain's age was 55.7 years, the average captain's career was 20.5 years, the average age of fishing vessels was 9.0 years, the average numbers of nets used by fishing boats was 14.0 sets, the average numbers of crew on board a fishing boat was 4.4 persons and the average numbers of operation days per voyage was 4.9 days (p < 0.05). As a result of the survey on safety factors during fishing operations, such as experience of ship accidents, major causes of ship accidents experienced, causes of ship accidents (first priority), experience of human accidents, major causes of human accidents, and causes of human accidents (first priority), more than 96% of the respondents experienced ship accidents including collisions with other vessels or fishing gear during fishing operations. The most significant cause of the accident was the other's fishing gear installed in the fishing grounds. The first possible causes of ship accidents during fishing operations were found to be other fishing gear installed in fishing grounds, steering or engine failure, and inability to avoid accidents during casting and hauling nets. The survey of the experience of human accidents, such as injuries or sea falls, showed that more than 90% of the respondents experienced human accidents during fishing operations. The most important cause of accidents experienced during fishing operations was stucked in a fishing gear during casting and hauling nets. The first important causes of accidents during fishing operations were movement of the fishing gear during casting and hauling nets, damage of the fishing gear such as rope cutting. The results are expected to be provided as a basic data to prevent safety accidents occurring during fishing operation and improve the fishing system in the coastal improved stow net fishery.

• 대한토목학회논문집
• /
• 제43권4호
• /
• pp.421-431
• /
• 2023

하수관로 열화모델은 하수관망을 관리하는 의사결정자에게 자산의 미래 상태 예측에 대한 중요한 정보를 제공할 수 있다. 본 연구에서는 CCTV 조사를 통해서 확보한 구조적 상태평가 이력자료를 기반으로 마르코프 연쇄 모델을 이용하여 하수관로의 노후도를 추정하였다. A시의 3개 배수분구에서 1998-1999년과 2010-2011년에 CCTV 조사에 의해 수집된 관경 450 mm와 600 mm의 흄관 자료를 이용하여 분석하였다. EM 배수분구의 450 mm 관로와 600 mm 관로에서 주요 결함 발생이 다른 두 배수분구보다 빠르게 발생하는 것으로 나타났다. 관로 설치 이후 35년이 지난 시점에는 450 mm 관로의 약 29%, 600 mm 관로의 약 38%가 주요 결함이 발생했으며, 100년 후에는 각각 62%와 74%의 관로가 주요 결함으로 관로 기능을 상실하는 수준으로 나타났다. 관로설치 35년 후, SN 배수분구는 450 mm 관로의 약 26%, 600 mm 관로에서 약 35%, HK 배수분구에서는 450 mm 관로의 약 27%, 600 mm 관로에서 약 37%의 주요 결함이 발생한 것으로 예측되었다. 또한 600 mm 관로가 450 mm 관로보다 평균 12년 정도 빨리 기능 저하가 일어나는 것으로 나타났다. 한편, 관로의 주요 결함등급 비율을 40%로 설정하여 관로의 유효사용수명으로 적용할 경우, 450 mm 관로는 SN배수분구에서 60년, EM배수분구에서 42년, HK배수분구 59년이며, 600 mm 관로에서는 각각 43년, 34년 39년으로 나타났다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제31권1호
• /
• pp.17-23
• /
• 2008

목적 : 골밀도검사의 중요한 부분을 차지하고 있는 검사장비 및 검사자의 정밀도와 정확도는 환경에 따라 차이가 있기 때문에 질 관리가 체계적으로 이루어져야 한다. 골밀도 검사장비의 노화 및 잦은 고장에 의하여 장비의 교체 및 추가 구입으로 인하여, 추적검사를 하는 환자들의 호환성에 문제가 있다. 따라서 장비 교체 및 증설 후 동일한 장비처럼 호환하여 시용해도 환자의 임상적인 골밀도 변화를 정확하고 정밀하게 반영할수 있는지 알아보고자 한다. 재료 및 방법 : 장비 정밀도는 GE Lunar Prodigy Advance 2 대의 장비 (P1, P2)와 HOLOGIC Spine Phantom(HSP)을 이용하여 각 장비에서 20 번씩 스캔하여 팬텀을 이용한 정밀도 데이터를 획득하였고 (Group 1), 여성 120명 (평균나이 48.78, $20{\sim}60$세)을 대상으로 각 장비에서 15명씩, 같은 환자가 두 번 촬영을 하여 각 검사자의 정밀도를 측정했다(Group 2), 또한 검사자의 정밀도는 팬텀(ASP)을 이용하여 매일 아침마다 질 관리 시행후 얻은은 데이터를 기준으로, 각각의 장비에서 HSP를 이용하여 각 장비에서 20번씩 스캔 후 데�歷� 획득하여 검사자정밀도 및교차 보정 데이터를 산출하였고(Group 3), 여성 120명(평균나이 48.78, $20{\sim}60$세)의 동일 환자를 대상으로 한 장비에서 한 번씩 교차로 측정하여 검사자 정밀도 및 교차보정 데이터를 산추라였다(Group 4). 결과 : Daily Q.C Data는 $0.996\;g/cm^2$, 변동계수(%CV) 0.08로 안정된 장비로서 Group 1에서 Mean${\pm}$SD 및 %CV값은 ALP(P1: $1.064{\pm}0.002\;g/cm^2$, $%CV=0.190\;g/cm^2$, P2: $1.061{\pm}0.003\;g/cm^2$, %CV=0.192). Group 2에서 Mean${\pm}$SD 및 %CV값은 P1: $1.187{\pm}0.002\;g/cm^2$, $%CV=0.164\;g/cm^2$, P2: $1.198{\pm}0.002\;g/cm^2$, %CV=0.163, Group 3에서의 Mean${\pm}$2SD 및 %CV는 P1 - (spine: $0.001{\pm}0.03\;g/cm^2$, %CV=0.94, Femur: $0.001{\pm}0.019\;g/cm^2$, %CV=0.96), P2 - (spine: $0.002{\pm}0.018\;g/cm^2$, %CV=0.55, Femur: $0.001{\pm}0.013\;g/cm^2$, %CV=0.48), Group 4에서 Mean${\pm}$2SD 및 %CV는, r값은 spine: $0.006{\pm}0.024\;g/cm^2$, %CV=0.86, r=0.995, Femur: $0{\pm}0.014\;g/cm^2$, %CV=0.54, r=0.998이였다. 결론 : HOLOGIC Spine Phantom과 LUNAR ASP %CV는 ISCD에서 규정한 정상오차 범위인 ${\pm}2%$안에 모두 포함되었고 BMD가 비교적 일정한 값을 유지하면 측정되어 뛰어난 재현성을 보였다. 하지만 Phantom은 환자의 체중이나 체지방 조성의 변화 등 임상적인 부분을 반영하는 데는 한계성을 갖고 있어 mis-calibration을 check하는데 유용할 것으로 판단된다. Group 3과 Group 4의 결과에서 환자를 하나의 장비로 두 번 측정한 값을 보았을 때와 두 대의 장비를 교차하여 측정한 값 모두 2SD값 이내에 포함되었고 선형회귀분석(Regression Analysis) r값이 0.99 이상으로 높은 정밀도와 상관도를 나타냄으로써 두 장비를 호환하여 추적검사를 시행하여도 영향이 없었다. 신뢰있는 BMD 산출을 위해서는 정기적으로 장비 및 검사자의 기능테스트와 이에 대한 적절한 교정행위가 이루어져야 할 것이다.

• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.71-110
• /
• 2010

본 연구에서는 항공권 예약 발권 웹사이트의 서비스 품질을 측정 뿐만 아니라 서비스 회복도 측정하고자 하였다. 또한 서비스 품질과 서비스 회복이 고객만족 및 충성의도에 미치는 영향관계를 실증하고자 하였다. 온라인 서비스 품질과 온라인 서비스 회복의 측정을 위해 Parasuraman, Zeithaml, & Malhotra(2005)가 개발한 E-S-QUAL과 E-RecS-QUAL을 사용했으며, 했다. E-S-QUAL은 온라인 서비스 품질을 측정하는 도구로써, 효율성, 시스템 이용가능성, 이행성, 프라이버시의 4개 차원 22개 항목으로 구성된다. E-RecS-QUAL은 온라인 서비스 회복을 측정하는 도구로써, 반응, 보상, 접촉의 3개 차원 11개 항목으로 구성된다. 실증분석을 위한 설문조사는 항공사나 여행사의 웹사이트를 통해 국내 외 항공권을 구입해 본 경험이 있는 소비자를 대상으로 실시하였는데, 총 400부가 회수되었고, 이 중 342부를 최종분석에 사용하였다. 실증분석을 위해 AMOS 7.0과 SPSS 15.0을 사용하였다. 먼저, SPSS 15.0을 사용하여, 요인점수를 이용한 회귀분석으로 가설검증을 한 결과, <가설 I-1, 2, 3, 4, II-1, 2, 3, III-1, IV-1>이 전부 채택되었다. 온라인 서비스 품질과 온라인 서비스 회복의 각 차원은 모두 전반적인 서비스 품질에 유의한 영향을 보였고, 전반적인 서비스 품질은 고객만족에 유의한 영향을 미쳤다. 마지막으로 고객만족 역시 충성의도에 유의한 영향을 미치는 것으로 확인되었다. 한편 AMOS 7.0을 사용하여 모형 분석을 하였는데, 모형의 적합도는 가설검증을 하기에 합당한 수치가 나왔다. 이를 토대로 가설검증을 한 결과, <가설 I-1, 3, II-1, 3, III-1, IV-1>은 채택되었고, <가설 I-2, 4, II-2>는 기각되었다. 이 결과는 Parasuraman et al.(2005)이 주장한 것처럼 E-S-QUAL을 나타내는 데는 요인점수를 이용한 회귀분석이 더 적합하다는 것을 보여주는 것이라고 판단된다. 이를 토대로 본 연구의 시사점을 정리하였다.