• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.127-140
• /
• 2015

A fault is one of the critical factors that may lead to a possible ground collapse occurring in construction site. A fault core, however, possibly acting as a failure plane in whole fault zone, is composed of fractured rock and gouge nonuniformly distributed and thus can be characterized by its wide range of shear strength which is generally acquired by experimental method for stability analysis. In this study, we performed direct shear test and grain size distribution analysis for 62 fault core samples cropped from 12 different spots located in the vicinity of Kyongju and Ulsan, Korea. As a result, the range of shear strength representing the characteristics of fault cores in the study regions is determined with regard to vertical stress using a regression analysis for experiment data. The weight ratio of gravels in the samples is proportional to the shear strength and that of silt and clay is in inverse proportion to the shear strength. For most samples, the coefficient of determination is over 0.7 despite of inhomogeneity of them and consequently we determined the lower limit and upper limit of the shear strength with regard to the weight ratio by setting the confidence interval of 95%.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.787-807
• /
• 2018

When conducting the underground safety impact assessment under the special law in Korea, it is essential to investigate the occurrence of underground cavities. When underground cavities were discovered, the underground safety was assessed through numerical analysis. The previous study has suggested the stability evaluation based on the factor of safety by changing the 2D shape of the small underground cavity. In this study, the effects of small underground cavities considering 3D shapes were examined using a continuum analysis program and compared with the 2D results presented in previous study. If the 3-Dimensional shape of the underground cavity is found close to the sphere type, it would be reasonable to evaluate the factor of safety by the shear strength reduction method regardless of the size and position of the cavity. If a high-aspect ratio underground cavity with a depth of 2 m or more from the ground surface and an aspect ratio (a/b) of 2.0 or more is in the vertical direction, not only the factor of safety but the failure mode shape should be cautions in the stability evaluation using the shear strength reduction method. The results of this study are expected to be basic data on underground safety impact assessment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.1759-1767
• /
• 2016

Background: Uterine sarcoma is a group of rare gynecologic tumors with various natures, and different lines of treatment. Most have a poor treatment outcome. This study targeted clinical characteristics, treatment, overall survival (OS), progression-free survival (PFS), and prognostic factors in uterine sarcoma patients in one tertiary center for cancer care. Materials and Methods: Uterine sarcoma patients who were treated at the Department of Obstetrics and Gynecology, Faculty of Medicine Vajira Hospital between January 1994 and December 2014 were identified. Clinico-pathological data were analyzed. Prognostic outcomes were examined by Kaplan-Meier curves and Cox regression analysis. Results: We identified 46 uterine sarcoma patients: 25 carcinosarcoma (CS) (54.3%), 15 leiomyosarcoma (LMS) (32.6%), and 6 undifferentiated uterine sarcoma (UUS) (13.1%) cases. Mean age was $54.0{\pm}11.9years$ (range 25-82 years). Abnormal uterine bleeding was the most common presenting symptom (63.0%). Among 33 patients (71.7%) who had pre-operative tissue collected, diagnosis of malignancy was correct in 29 (87.9%). All patients received primary surgery and retroperitoneal lymph nodes were resected in 34 (73.9%). After surgery, 5 (10.9%) had gross residual tumors. Stage I disease was most commonly found (56.5%). Adjuvant treatment was given to 27 (58.7%), most commonly chemotherapy. After a median follow-up of 16.0 months (range 0.8-187.4 months), recurrence was encountered in 22 patients (47.8%). Median time to recurrence was 5.8 months (range1.0-105.5 months). Distant metastasis was more common than local or locoregional failure. The 2-year PFS was 45.2% (95% confidence interval [CI], 30.6%-59.7%) and the 2-year OS was 48.3% (95% CI, 33.3%-60.7%). Multivariable analyses found residual disease after surgery as a significant factor only for PFS. Conclusions: Uterine sarcoma is a rare tumor entity. Even with multimodalities of treatment, the prognosis is still poor. Successful cytoreductive surgery is a key factor for a good survival outcome.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.806-813
• /
• 2020

Objective : Lumbar disc herniation (LDH) is a common disease, and lumbar discectomy (LD) is a common neurosurgical procedure. However, there is little previous data on return to work (RTW) after LD. This study investigated the period until the RTW after LD prospectively. Clinically, the pain state at the time of RTW also checked. RTW failure rate 6 months after surgery also investigated. Methods : Patients with daily/regular jobs undergoing LD between September 2014 and December 2018 were enrolled. Pain was assessed by the Oswestri Disability Index (ODI) and the Numeric Rate Scale (NRS). Employment type was divided into self-employed, regular and contracted. Monthly telephone interviews were conducted to check RTW status and self-estimated work capability after surgery. Results : Sixty-seven patients enrolled in this study. Three patients failed to RTW, and three others resigned within 6 months after surgery. The preoperative NRS and ODI were 7.2±1.2 and 22.1±7.9, respectively. The average time to RTW was 5.1±6.0 weeks. At RTW, NRS was 1.5±1.8 and ODI was 6.3±3.9. Amongst patients that successfully returned to work were 16 self-employed workers, 42 regular employees, and three contracted workers. The time to RTW of self-employed, regular, and contracted workers were 5.9±8.8, 4.2±4.3 and 13.3±2.3 weeks, respectively (p=0.011). Thirty-six of the patients that returned to work self-reported a 22.8±15.6% reduction in work capability at 6 months. Conclusion : RTW may vary depending on the employment status. In this study, we found that while employment type may affect the length to RTW, most patients were able to RTW and >40% of patients reported no loss of work capabilities 6 months postoperatively, hopefully alleviating some patient hesitation towards LD.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.21-27
• /
• 2014

Objective : Infectious spinal disease is regarded as an infection by a specific organism that affects the vertebral body, intervertebral disc and adjacent perivertebral soft tissue. Its incidence seems to be increasing as a result of larger proportion of the older patients with chronic debilitating disease, the rise of intravenous drug abuser, and the increase in spinal procedure and surgery. In Korea, studies assessing infectious spinal disease are rare and have not been addressed in recent times. The objectives of this study are to describe the epidemiology of all kind of spinal infectious disease and their clinical and microbiological characteristics as well as to assess the diagnostic methodology and the parameters related to the outcomes. Methods : A retrospective study was performed in all infectious spinal disease cases presenting from January 2005 to April 2010 to three tertiary teaching hospitals within a city of 1.5 million in Korea. Patient demographics, risk factors, clinical features, and outcomes were assessed. Risk factors entailed the presence of diabetes, chronic renal failure, liver cirrhosis, immunosuppressants, remote infection, underlying malignancy and previous spinal surgery or procedure. We comparatively analyzed the results between the groups of pyogenic and tuberculous spinal infection. SPSS version 14 statistical software was used to perform the analyses of the data. The threshold for statistical significance was established at p<0.05. Results : Ninety-two cases fulfilled the inclusion criteria and were reviewed. Overall, patients of tuberculous spinal infection (TSI) and pyogenic spinal infection (PSI) entailed 20 (21.7%) and 72 (78.3%) cases, respectively. A previous spinal surgery or procedure was the most commonly noted risk factor (39.1%), followed by diabetes (15.2%). The occurrence of both pyogenic and tuberculous spondylitis was predominant in the lumbar spine. Discs are more easily invaded in PSI. At initial presentation, white cell blood count and C-reactive protein levels were higher in PSI compared to TSI (p<0.05). Etiological agents were identified in 53.3%, and the most effective method for identification of etiological agents was tissue culture (50.0%). Staphyococcus aureus was the most commonly isolated infective agent associated with pyogenic spondylitis, followed by E. coli. Surgical treatment was performed in 31.5% of pyogenic spondylitis and in 35.0% of tuberculous spondylitis cases. Conclusion : Many previous studies in Korea usually reported that tuberculous spondylitis is the predominant infection. However, in our study, the number of pyogenic infection was 3 times greater than that of tuberculous spinal disease. Etiological agents were identified in a half of all infectious spinal disease. For better outcomes, we should try to identify the causative microorganism before antibiotic therapy and make every effort to improve the result of culture and biopsy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.269-275
• /
• 2020

RAM of elements to support weapon systems is conducted at the initial development phase and standard is suggested to accomplish strategy requirement performance from a design spec. Operational availability is a key point of the military's ability to ensure combat readiness and to win the battle. In the weapon system development phase, operational availability is used as a development standard. The military provides ALDT, operation and standby time, which are elements of operational availability. ALDT is a key element of operational availability that must be maintained for combat readiness, as it depends on the aging of a weapon system, maintenance policies and geographical conditions. Operational Availability to be set at the development phase has many differences from the operational availability that is analyzed in the actual operational phase because ALDT is applied as a simple assumption. In the paper, we analyzed ALDT applying the decision tree method through failure data acquired from initial operation. Through this study, we have devised the optimal ALDT setting method to achieve operational availability about operation when the weapons system is unstable.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2002

Current composites are made with dimethacrylate monomers and silane-treated silica microfillers, either alone or with silane treated glass fillers The main reasons for clinical failure of dental composites are secondary caries, wear and fracture. Most of practitioner want to get a composite which is more tougher under occlusal stress, less polymerization contraction, and better handling properties in application clinically. The aim of this study was to investigate the influence of resin matrix with various flows on the physical proper-ties such as fracture toughness and degree of conversion of the experimental resins. It was hypothesized that flexible or tough resin composites can be designed by judicious choice of monomer composition Various flow resin matrices containing Bis-GMA, UDMA, and TEG-DMA were made by altering the pro-portion of the monomers. After the unfilled resins were light-cured for different light intensity, the fracture toughness(K$_{1c}$) was measured according to ASTM standard using the single edge notched geometry, and degree of conversion(DC) was measured by FTIR. And experimental composites were formulated with variations in the proportion of silanated quartz and strontium glass fillers as 60, 75, and 77wt%. Also, the physical properties of composites with various filer contents were evaluated as same manner. All resulting data were compared by ANOVA/Tukeys test at 0.05 level. The results were as follows; 1. The degree of conversion of high flow resin containing less Bis-GMA was higher than that of low flow unfilled resin 2. While the degree of conversion of unfilled resin was increased according to light intensity for polymerization, there was no significant increase with moderate and high light intensity. Also, the fracture toughness was not increased by high light intensity. 3. The fracture toughness was high in the low flow unfilled resin containing higher contents of Bis-GMA. 4. There was a significant increase for fracture toughness and a tendency for degree of conversion to be reduced when the content of fillers was increased. 5. In the experimental composites, the flow of resin matrix did not affected on the fracture toughness, even, which was decreased as increase of viscosity. These results showed that the physical properties of a dental composite could be attributed to the flow of resin matrix with relative content of monomers. Specific combination of resin monomers should be designed to fulfil the needs of specific indication for use.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.153-164
• /
• 2012

The major petroglyphs of Bangudae site were composed mainly of hornfelsed shale. Surface of the rock was formed weathering layer (average porosity 25%) that discriminated mineral and chemical composition against fresh rock (average porosity 0.4%). The lost area of major petroglyphs in the past up images carved to the present was calculated about 23.8%. And occurrence area of exfoliation indicated 1.2% of the whole petroglyphs. As a result of the chromaticity analysis, color of the major petroglyphs was changed brighter and yellower than fresh rock by chemical and biological weathering factors. Average ultrasonic velocity of petroglyphs was measured 2,865m/s. This result indicated that ultrasonic velocity decreased especially bottom of petroglyphs than measured result in 2003 year. The results of the evaluation for slope stability, it identified the possibility of toppling, planar and wedge failure in host rock. The 3D image analysis and modeling data of the cavern obtained for structural reinforcement.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.37-49
• /
• 2013

Purpose - This research identifies the meaning of the core capability level of Car Master and the reason why its service at the Moment of Truth should be demonstrated through empirical cases. It can be seen that this study differs from existing research because it proposes that the recognized core capability level to achieve customer satisfaction should focus on the mediating effect of Moment of Truth quality. This paper examines the effect of Car Master's recognized core capability level on customer satisfaction by using the variables mentioned above. Moreover, this study uses regression analysis to verify that the mediating effect of Moment of Truth quality on Car Master's capability level achieves customer satisfaction. Research design, data, and methodology - First, we present evidence that could apply to Car Master's recognized core capability level by detailing the relationship between customer satisfaction and a structuring factor for Car Master's core capability level. Our proposed research model observes the relationship between the structuring factor of core capability and customer satisfaction. Second, we had an opportunity to define how the core capability and Moment of Truth quality affect customer satisfaction by performing empirical analysis on the partial mediating effect of Moment of Truth quality at a recognized core capability level and Moment of Truth quality affecting customer satisfaction. Results - First, the results indicate that Car Master's recognized core capability level (product professionalism, marketing skill, and reliability) positively affects customer satisfaction. Second, the results show that an ability to listen and a sense of dedication positively affect customer satisfaction, and are among the Moment of Truth quality factors; but performance capability, which is one of the Moment of Truth quality factors, does not positively affect customer satisfaction. These results clearly differ from prior studies focused on Moment of Truth quality and consumer satisfaction. Third, the results show that Moment of Truth quality has a partial mediating effect in terms of the impact of Car Master's recognized core capability level in achieving consumer satisfaction. Conclusions - This research indicates that the company will be able to expand if they investigate and show an interest in more training and education for Car Master. The study verified that outstanding Car Masters show differentiated performance on customer satisfaction at the Moment of Truth in various instances. Thus, we believe that this is the time for a discussion on systematic and empirically recognized core capability levels and the Moment of Truth quality. The study on Car Master's recognized core capability level offers suitable solutions for Car Masters to respond to customers at the Moment of Truth. Further, this study emphasizes the importance of service as a critical factor having a direct relationship with the company's success and failure and contributing to building trust with the customer. Thus, an investment in continuous education and training for Car Master will help the growth of the business.