• Tuberculosis and Respiratory Diseases
• /
• v.67 no.2
• /
• pp.95-104
• /
• 2009

Background: The pathophysiologic mechanisms of early acute lung injury (ALI) differ according to the type of primary insult. It is important to differentiate between direct and indirect pathophysiologic pathways, and this may influence the approach to treatment strategies. NF-$\kappa$B decoy oligodeoxynucleotide (ODN) is a useful tool for the blockade of the expression of NF-$\kappa$B-dependent proinflammatory mediators and has been reported to be effective in indirect ALI. The purpose of this study was to investigate the effect of NF-$\kappa$B decoy ODN in the lipopolysaccharide (LPS)-induced direct ALI model. Methods: Five-week-old specific pathogen-free male BALB/c mice were used for the experiment. In the preliminary studies, tumor necrosis factor (TNF)-$\alpha$, interleukine (IL)-6 and NF-$\kappa$B activity peaked at 6 hours after LPS administration. Myeloperoxidase (MPO) activity and ALI score were highest at 36 and 48 hours, respectively. Therefore, it was decided to measure each parameter at the time of its highest level. The study mice were randomly divided into three experimental groups: (1) control group which was administered 50 ${\mu}L$ of saline and treated with intratracheal administration of 200 ${\mu}L$ DW containing only hemagglutinating virus of Japan (HVJ) vector (n=24); (2) LPS group in which LPS-induced ALI mice were treated with intratracheal administration of 200 ${\mu}L$ DW containing only HVJ vector (n=24); (3) LPS+ODN group in which LPS-induced ALI mice were treated with intratracheal administration of 200 ${\mu}L$ DW containing 160 ${\mu}g$ of NF-$\kappa$B decoy ODN and HVJ vector (n=24). Each group was subdivided into four experimental subgroups: (1) tissue subgroup for histopathological examination for ALI at 48 hours (n=6); (2) 6-hour bronchoalveolar lavage (BAL) subgroup for measurement of TNF-$\alpha$ and IL-6 in BAL fluid (BALF) (n=6); (3) 36-hour BAL subgroup for MPO activity assays in BALF (n=6); and (4) tissue homogenate subgroup for measurement of NF-$\kappa$B activity in lung tissue homogenates at 6 hours (n=6). Results: NF-$\kappa$B decoy ODN treatment significantly decreased NF-$\kappa$B activity in lung tissues. However, it failed to improve the parameters of LPS-induced direct ALI, including the concentrations of tumor necrosis factor-$\alpha$ and interleukin-6 in BALF, myeloperoxidase activity in BALF and histopathologic changes measured by the ALI score. Conclusion: NF-$\kappa$B decoy ODN, which has been proven to be effective in indirect models, had no effect in the direct ALI model.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.111-125
• /
• 1990

For the last several years, considerable criticism has been leveled against Korea's exchange rate management. While Korea was designated a currency manipulator by the U.S., domestically it is often complained that the won/dollar rate did not adequately reflect changes in Korea's export competitiveness and fluctuations in the exchange rates of major currencies. In view of this situation, Korea changed its exchange regime at the beginning of March this year from the dual currency basket system to a more flexible one, called a "market average rate regime". Under this new regime, the won rate is determined in the exchange market based upon the supply of and demand for foreign exchange and is allowed to freely fluctuate each day within a + 0.4 % range. This paper, first, seeks to evaluate Korea's exchange rate management under the dual basket regime of the 1980s, and then to construct an optimal currency basket for the won which could provide a proper indicator for exchange market intervention under the new market average rate regime. The analysis of fluctuations in the real effective exchange rate (REER) of the won indicates that the won rates in the 1980s failed not only to offset changes in relative prices between home and trading partner countries, but also to properly respond to variations in major exchange rates as further evidenced by sizable fluctuations in the nominal effective rates of the won. In other words, the currency basket regime which was adopted in 1980 for the stabilization of the REER of the won has not been operated properly, mainly because authorities often resorted to policy considerations in determining the won's rate. In the second part of the paper, an optimal currency basket for Korea is constructed, designed to minimize the fluctuations in the REER of the won without including policy considerations as a factor. It is recognized, however, that both domestic and foreign price data are not available immediately for the calculation of the REER. For this problem, the approach suggested by Lipschitz (1980) is followed, in which optimal weights for currencies in the basket are determined based upon the past correlation between price and exchange rates. When the optimal basket is applied to Korea since the mid-80s, it is found that the REER of the won could have been much more stable than it actually was. We also argue for the use of variable weights rather than fixed ones, which would be determined by the changing relationship between exchange rates and relative prices. The optimal basket, and the optimal basket exchange rate based on that basket, could provide an important medium- or long-term reference for proper exchange market intervention under the market average rate regime, together with other factors, such as developments in the current account balance and changes in productivity.

• Journal of Korean Society of Forest Science
• /
• v.82 no.1
• /
• pp.26-33
• /
• 1993

In vitro shoot proliferation and rooting were tested for 2-0 seedlings of half-sib families of 4 plus oaks trees. Nodal segments having axillary buds from 37 families(16 of Quercus acutissima, 10 of Q. variabilis, 7 of Q. serrata, and 4 of Q. mongolica) were cultured on WPM(Woody Plant Medium) supplemented with 0.5 mg/l BA (6-benzyladenine) and 0.01 mg/l NAA(${\alpha}$-naphthalene acetic acid) and subcultured at 2-3 weeks of intervals fur 6 months. In vitro rooting was carried out on GD(Gresshoff and Doy) medium supplemented with 0.5mg/l IBA(indole butyric acid). The capacity for shoot proliferation and rooting was highly varied with families. Generally, white oaks(Q. serrata and Q. mongolica) showed poor response than black oaks(Q. acutissima and Q, variabilis) in shoot proliferation and rooting. Among the total of 37 families, 7 of Q. acutissima, each 2 of Q. variabilis, Q. serrata, and Q. mongolica revealed abilities for continuous shoot proliferation, and the others failed to proliferate. Rooting of the selected oak trees also greatly varied among the families. In Q. acutissima, rooting ratio ranged from 10.0%(CB 25. KG 4) to 89.8%(CB 18). Although 26.7% of KG 16 in Q. variabilis, 3.3% of JN 15 in Q. serrata were rooted, Q. mongolica was not rooted at all in this experimental conditions. No relationship between shoot growth and the rooting ability was observed. Present results suggest the possibility of large-scale micropropagation, but further studies on family differences, shoot-tip necrosis, and callusing of rooting junction are still required to develop reliable micropropagation systems.

• Journal of The Korean Association For Science Education
• /
• v.34 no.8
• /
• pp.703-718
• /
• 2014

This study sought to investigate learning progressions for astronomical systems which synthesized the motion and structure of Earth, Earth-Moon system, solar system, and the universe. For this purpose we developed ordered multiple-choice items, applied them to elementary and middle school students, and provided validity evidence based on the consequence of assessment for interpretation of learning progressions. The study was conducted according to construct modeling approach. The results showed that the OMCs were appropriate for investigating learning progressions on astronomical systems, i.e., based on item fit analysis, students' responses to items were consistent with the measurement of Rasch model. Wright map analysis also represented that the assessment items were very effective in examining students' hypothetical pathways of development of understanding astronomical systems. At the lower anchor of the learning progression, while students perceived the change of location and direction of celestial bodies with only two-dimensional earth-based view, they failed to connect the locations of celestial bodies with Earth-Moon system model, and they could recognized simple patterns of planets in the solar system and milky way. At the intermediate levels, students interpreted celestial motion using the model of Earth rotation and revolution, Earth-Moon system, and solar system with space-based view, and they could also relate the elements of astronomical structures with the models. At the upper anchor, students showed the perspective change between space-based view and earth-based view, and applied it to celestial motion of astronomical systems, and they understood the correlation among sub-elements of astronomical systems and applied it to the system model.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.241-251
• /
• 2010

This study aims at contributing to the restorative dentistry by examining results in the vertical load test of four different low invasive fixed partial dentures. Based on a hypothesis on the right upper first molar is missing, three units of FPDs were made for the second premolar and the second molar abutment. that is, twelve metal dies and FPDs were made for resin bonded FPD and Two Key Bridges and Human Bridge without occlusal rest and Human Bridge with occlusal rest. By using universal test machine, the numerical maximum value were recorded during the vertical load test of each FPDs after the bonding process treated by Maxcem which is resin cement. The failure process and its result of prosthesis were also observed. The maximum load was 7,295 N, 4,729 N, 2,190 N, 3,073 N from groups of resin bonded FPD, Two Key Bridge, Human Bridge without occlusal rest and Human Bridge with occlusal rest respectively. There was a statistical significance among the groups of resin bonded FPD, Two Key Bridge and Human Brides. However, there was no significant difference between Human Bridge without occlusal rest and Human Bridge with occlusal rest. Regarding the failure of prosthesis, the groups of Resin Bonded FPD and Two Key Bridge showed that one of the abutment teeth in the both side of retention part was highly failed earlier than the other one (83.2% and 66.6% respectively). While, Human Bridge without occlusal rest and Human Bridge with occlusal rest showed high percentage of failure in the abutment teeth in the both side of retention part at the same time (91.6% and 58.3% respectively). This study demonstrates that the group of Human Bridges has low resistance to the vertical loads of low invasive FPDs in comparison with the groups of resin bonded FPD and Two Key Bridge. Nevertheless, the maximum occlusal load of the restorative position, resistance to diverse restoration failure, amount of tooth reduction and patients' cooperation should be considered when they are applied in the clinic in order to choose an appropriate restoration for each patient.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.101-118
• /
• 1993

Generally there is no law and liability system which applies particulary to commercial space ventures. There are several international treaties and national statutes which deal with space ventures, but their impact on the liability of commercial space ventures has not been significant. Every state law in the United States will impose both tort and contract liability on those responsible for injuries or losses caused by defective products or by services performed negligently. As with the providers of other products and services, those who participate in commercial space ventures have exposure to liability in both tort and contract which is limited to the extent of the resulting damage The manufacturer of a small and cheap component which caused a satellite to fail to reach orbit or to operate nominally has the same exposure to liability as the provider of launch vehicle or the manufacturer of satellite into which the component was incorporaded. Considering the enormity of losses which may result from launch failure or satellite failure, those participated in commercial space ventures will do their best to limit their exposure to liability by contract to the extent permitted by law. In most states of the United States, contracts which limit or disclaim the liability are enforceable with respect to claims for losses or damage to property if they are drafted in compliance with the requirements of the applicable law. In California an attempt to disclaim the liability for one's own negligence will be enforceable only if the contract states explicitly that the parties intend to have the disclaimer apply to negligence claims. Most state laws of the United States will refuse to enforce contracts which attempt to disclaim the liability for gross negligence on public policy grounds. However, the public policy which favoured disclaiming the liability as to gross negligence for providers of launch services was pronounced by the United States Congress in the 1988 Amendments to the 1984 Commercial Space Launch Act. To extend the disclaimer of liability to remote purchasers, the contract of resale should state expressly that the disclaimer applies for the benefit of all contractors and subcontractors who participated in producing the product. This situation may occur when the purchaser of a satellite which has failed to reach orbit has not contracted directly with the provider of launch services. Contracts for launch services usually contain cross-waiver of liability clauses by which each participant in the launch agrees to be responsible for it's own loss and to waive any claims which it may have against other participants. The crosswaiver of liability clause may apply to the participants in the launch who are parties to the launch services agreement, but not apply to their subcontractors. The role of insurance in responding to many risks has been critical in assisting commercial space ventures grow. Today traditional property and liability insurance, such as pre-launch, launch and in-orbit insurance and third party liability insurance, have become mandatory parts of most space projects. The manufacture and pre-launch insurance covers direct physical loss or damage to the satellite, its apogee kick moter and including its related launch equipment from commencement of loading operations at the manufacture's plant until lift off. The launch and early orbit insurance covers the satellite for physical loss or damage from attachment of risk through to commissioning and for some period of initial operation between 180 days and 12 months after launch. The in-orbit insurance covers physical loss of or damage to the satellite occuring during or caused by an event during the policy period. The third party liability insurance covers the satellite owner' s liability exposure at the launch site and liability arising out of the launch and operation in orbit. In conclusion, the liability in commercial space ventures extends to any organization which participates in providing products and services used in the venture. Accordingly, it is essential for any organization participating in commercial space ventures to contractually disclaim its liability to the extent permitted by law. To achieve the effective disclaimers, it is necessary to determine the applicable law and to understand the requirements of the law which will govern the terms of the contract. A great deal of funds have been used in R&D for commercial space ventures to increase reliability, safety and success. However, the historical reliability of launches and success for commercial space ventures have proved to be slightly lower than we would have wished for. Space insurance has played an important role in reducing the high risks present in commercial space ventures.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.741-755
• /
• 1995

Currently titanium is the material of choice for implants because of its biological acceptance. This high degree of biocompatibility is thought to result, in part, from the protective and stable oxide layer that presumably aids in the bonding of the extracellular matrix at the implant-tissue interface. Endosseous dental implants are interfaced with bone, connective tissue, and epithelium when implanted into the jaw bone. The soft tissue interface including connective tissue and epithelium is one of the most critical factors in the determination of implant maintenance and prognosis. For maintenance of failing or failed implants, it is essential to treat the implant fixture surface to remove bacterial endotoxins and make a surface tolerated by surrounding soft and hard tissues. In this study, the effect of mechanical treatment on titanium plasma sprayed implant on adhesiveness and proliferation of human gingival fibroblasts and changed surface characteristics were studied. titanium plasma sprayed discs manufactured by Friedrichsfeld company were treated with loaw speed stone bur, a rubber point and a jetpolisher. Its surface components were analyzed with Energy dispersive X-ray spectroscopy to evaluate whether the surface characteristics were altered or not. To observe the spreading pattern of the human gingival fibroblasts which attached to the all specimens author used the scanning electron microscope. The results were as follows : Pure titanium and plasma sprayed titanium, stone polished titanium showed titanium peak and small amout of aluminum, so there was no alteration on surface characteristics. Under the scanning electron microscopic examination in the initial attachment of human gingival fibroblast, there was a slight enhancement in pure titanium, stone polished titanium than plasma sprayed titanium. After 6 hours, the pure titanium and stone polished titanium showed human gingival fibroblasts were elongated and connected with numerous processes. Human gingival fibroblasts were more intimately attached on the pure titanium discs than on the other discs. The human gingival fibroblasts attached on the plasma sprayed titanium by thin and elongated processes. After 24 hours, the human gingival fibroblasts connected with each other via numerous processes and compeletly covered the pure titanium and stone polshed titanium discs. Human gingival fibroblasts had multiple point contacts with more long and thin lamellopodia and showed a little bare surface on plasma sprayed titanium discs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.175-180
• /
• 2008

Traumatic injuries to the primary dentition are commonly encountered problems in dental practice. It is found that 30% of the children had injuries to the primary dentition and 22% to the permanent dentition. The greatest incidence of trauma to the primary dentition occurs at the ages of 2 and 3 as children start to learn motor coordination. Because teeth and alveolar bone are traumatized simultaneously, alveolar bone fractures are likely to occur when multiple teeth are involved in injuries. Dental splints are indicated for the management of maxillofacial fractures. They enable anatomic reduction of fractured segments and help immobilization and maintenance of the fragments after reduction. They also act as a stabilizer during rehabilitation. Various types of dental splints are available. In this case, routine resin-wire splint technique could not be applied because of the child's uncooperative behavior. Oral sedation was not indicated because N.P.O. had not been preceded. Therefore, we decided to use open-cap acrylic splint instead. Stabilization using open cap acrylic splint requires minimum chair time with reduced discomfort to both patient and dentist. It is an effective means of splint for uncooperative children and especially useful when other means of fixation have been failed. Because trauma on the primary dentition can affect the underlying permanent tooth germ, it is important to monitor eruption process of the permanent dentition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.427-432
• /
• 2009

The aim of this study was to compare the shear-peel strength and the fracture site of 5 commercially available orthodontic band cements. One hundred molar bands were cemented to extracted human 3rd molars. The specimens were prepared in accordance with the manufacturer's instructions for each cement. After storage in a humidor at $37^{\circ}C$ for 24 hours, the shear debonding force was assessed for each specimen using an universal testing machine with crosshead speed of 2 mm/minute. Maximal failure stress was converted to mean shear-peel strength, MPa. The predominant site of band failure was recorded visually for all specimens as either at the band/cement or cement/enamel interface. Mean shear-peel strength of Ormco was the highest(2.44${\pm}$0.57), followed by Fuji $Ortho^{TM}$(2.24${\pm}$0.50), $Ketac-Cem^{TM}$(2.10${\pm}$0.57), 3M $Unitek^{TM}$(1.82${\pm}$0.43), $Band-Lok^{TM}$(1.73${\pm}$0.28). There were statistically significant differences between Ormco and $Band-Lok^{TM}$, Ormco and 3M $Unitek^{TM}$, and Fuji $Ortho^{TM}$ and $Band-Lok^{TM}$(p<0.05). The predominant site of bonding failure for bands cemented with the Ormco was at the band/cement interface, whereas bands cemented with Ultra $Band-Lok^{TM}$ failed predominantly at the enamel/cement interface. There was no significant difference among the other cements(Fuji $Ortho^{TM}$, 3M $Unitek^{TM}$, $Ketac-Cem^{TM}$).

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.5
• /
• pp.618-627
• /
• 1999

Background : Rifampicin (RFP) is a key component of the antituberculous short-course chemotherapy. Usually the RFP resistant M.tuberculosis is also resistant to isoniazid (INH), so the RFP resistance is the marker of multi-drug resistant (MDR) tuberculosis. But unusual cases of mono-RFP-resistant tuberculosis have been recently reported with increasing frequency, especially associated with HIV infection in western countries. Therefore, we conducted a retrospective study to investigate the frequency, causes, and the clinical characteristics of mono-RFP-resistant tuberculosis in Korea. Methods : Of the bacteriologically confirmed and susceptibility-proven 699 pulmonary tuberculosis patients (921 isolates) who visited Asan Medical Center from January 1990 to August 1997, eighteen patients with INH-susceptible and RFP-resistant tuberculosis were evaluated. Previous history of tuberculosis, antituberculous drug compliances, associated systemic illness, drug susceptibility patterns, and clinical outcomes were analysed. And rpoB gene sequencing was done in 6 clinical isolates of M. tuberculosis. Results : The mean age of 18 patients was $43{\pm}14$ years, and the sex ratio is 12:6 (M : F). Sixteen (89%) patients had previous history of tuberculosis. None had diagnosed gastrointestinal disorders, and 2 HIV tests that were performed came out negative. Susceptibility tests were done repeatedly in eleven patients, and six (55%) were mono-RFP resistant repeatedly while five (45%) evolved to MDR tuberculosis. Eight (44%) patients were cured, six (33%) failed, three (17%) were lost to follow-up, and the other one is now on treatment. rpoB gene sequencing showed 5 mutations, codon 531 TCG to TIG mutation in 4 isolates and 526 CAC to TAC in 1 isolate. Conclusion : The clinical characteristics of mono-RFP resistant tuberculosis were similar to that of MDR tuberculosis in Korea where the HIV infection rate is lower than western countries. But some patients with mono-RFP-resistant tuberculous could be cured by primary drug regimens including RFP, suggesting that mono-RFP-resistant tuberculous is a different entity from MDR tuberculosis.