• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2004

The purpose of this paper is to setup reasonable criterion for underwriters to reimburse the expenses of suing and labouring incurred by assured, using game theory. As for the upper limit for the reimbursement, MIA and ICC do not mention at all but stipulate that proper and reasonable expenses shall be reimbursed, while ITC-Hulls set the amount insured as the upper limit to compensate the sum of expenses and damage loss. And as for failed measures of averting and minimizing loss, MIA and ICC do not mention either, while ITC-Hulls stipulates underwriters shall compensate the expenses and damage loss within the amount insured. The main results of this paper are as follows: First, it is for the benefit of underwriters to reimburse the expenses incurred to take such reasonable measures to avert or minimizing a loss which would be recoverable under the insurance. Second, the expenses of single measure should not be above the amount insured. Third, even if the measures failed, the expense should be reimbursed if it is less than the expected value of the subject-matter insured that could be recovered by the measures. Last, if the measures are taken several times individually, even if the sum of expenses might be above the amount insured, it should be reimbursed.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.611-620
• /
• 2008

Purpose: The purpose of this study was to assess the long term survival rates of the most posterior single tooth implant and to evaluate the influence of implant characteristics on implant survival. Material and Methods: This retrospective report presents findings on 37 patients with 43 implants replacing single molars. The inclusion criteria were having implants replacing a molar of the most posterior region and follow-up data over at least 6 months. Data were recorded regarding the incidence of complications and survival rates of these implants. Results: The range of follow-up was from 9 to 66 months(mean: 40.2 months). The cumulative survival rate of total implants was 93.0% which reflects the loss of three implants: one had broken neck, one implant failed because of infection, one implant showed failed osseointegration. Abutment- screws loosening occurred in five implants(11.6%). Conclusion: Within the limits of this study, a single tooth-implant can serve as a good long-term and predictable treatment modality to replace the most posterior teeth with low complication and failure rates.

• Sleep Medicine and Psychophysiology
• /
• v.23 no.2
• /
• pp.93-96
• /
• 2016

Obstructive sleep apnea syndrome (OSAS) has negative effects on health, including increased mortality, risk of cardiovascular disease, and neurocognitive difficulties. OSAS is common in obese patients and obesity is an important risk factor of OSAS. A 41-year-old female OSAS patient with severe obesity (body mass index [BMI] ${\geq}35$) who failed dietary weight loss underwent bariatric surgery. After surgery, there were improvements in BMI (from 36.9 to $31.7kg/m^2$) and polysomnographic data, including the apnea-hypopnea index (from 25.1 to 11.2 events/hr) and minimum SaO2 (from 69 to 82%). This case demonstrates that bariatric surgery may be an effective therapeutic option to reduce sleep-disordered breathing in severely obese patients with moderate OSAS. Bariatric surgery as a treatment option for OSAS should be considered in OSAS patients with severe obesity who failed dietary weight loss.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.240-244
• /
• 2005

In this study a simple model is developed that predicts impact damage in a composite laminate using an analytical model. The model uses a non-linear approximation method (Rayleigh-Ritz) and the large deflection plate theory to predict the number of failed plies and damage area in a quasi-isotropic composite circular plate (axisymmetric problem) due to a point impact load at its centre. It is assumed that the deformation due to a static transverse load is similar to that occurred in a low velocity impact. It is found that the model, despite its simplicity, is in good agreement with FEM predictions and experimental data for the deflection of the composite plate and gives a good estimate of the number of failed plies due to fibre breakage. The predicted damage zone could be used with a fracture mechanics model developed by the second investigator and co-workers to calculate the compression after impact strength of such laminates. This approach could save significant running time when compared to FEM solutions.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.401-409
• /
• 2001

Passive type mufflers installed on every car haute inherent problem of lowering engine power and fuel efficiency caused by backpressure which is byproduct of complex internal structure. Recent improvements like installing a calve to change exhaust gas path depending on power requirement and rpm have only marginally improved performance. Tremendous amount of recent research works on active exhaust noise control have failed to commercialize because of numerous physical and economical reasons. In this paper, a unique seal-active muffler using difference of transmission paths is presented. In this system exhaust pipe is divided into two and joined again downstream. Exhaust noise is reduced by destructive interference when two-divided noise join again with transmission paths'difference which is half of the wavelength of a main noise frequency. One divided path has a sliding mechanism to change length thereby transmission path length difference is adjusted to entwine rpm change. The proposed system has minimal backpressure and does not need a secondary sound source like a speaker so it can overcome many problems of failed active noise control methods. We have verified proposed system's superior performance by simulation and comparison experiment with passive mufflers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1666-1670
• /
• 2006

The purpose of this study is to analyze how a downstream channel is affected in case of hypothetical dam failure. The object of it is Hwacheon dam basin within the basin of North Han river. This study has analyzed the influence on Pyeonghwa(Peace) dam and Hwacheon dam supposing that the Imnam dam in North Korea on the upper stream of North Han river is failed hypothetically at the MFWL(maximum flood water level) by a deluge of rain. The model applied at the main study is NWS(National Weather Service) FLDWAV(Flood Wave Routing Model). Dam breach characteristics data are analyzed by making nine hypothetical scenarios on the basis of other studies on the shape and size of dam breach, time of failure and so on. Expected peak discharge through the breach is verified to have the propriety in comparison with empirical function which is developed on the basis of the case of dam breach in the foreign countries and it is observed that peak discharge is more increasing, as the time of breach gets shorter and the breach width gets bigger. As a result of main study, even though the Imnam dam is hypothetically failed down, there has no influence on the Hwacheon dam of the downstream as the extended Pyeonghwa dam on the downstream controls the volume of discharge properly.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.484-488
• /
• 1997

Fission product release (FPR) assessment for 100% reactor outlet header (ROH) break in CANDU reactor loaded with CANFLEX-NU fuel bundles has been performed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The fuel failure thresholds for the CANFLEX and standard bundle elements are very similar. All the sheaths at the corresponding fuel failure thresholds for the CANFLEX and standard bundles fail due to the significant cracks in the surface oxide, except those for the CANFLEX inner element at burnups of 220 to 240 MW.h/kg(U), which fail due to the excessive diametral strain. The fuel failure analysis predicts that the number of failed fuel elements for the CANFLEX bundle case is none, while that for the standard bundle case is 1827. The total (gap plus bound) I-131 releases for the CANFLEX and standard bundles are none and 5889 TBq, respectively The significant reduction of the number of failed fuel elements and FPR for the CABFKEX fuel bundle is attributed to the lower linear power of the CANFLEX fuel bundle compared with the standard fuel bundle.

• Journal of Chest Surgery
• /
• v.33 no.5
• /
• pp.385-390
• /
• 2000

Background: To review the experience that used both ventricular assist device(VAD) and extracorporeal membrane oxygenation(ECMO) for children with congential heart disease requiring postcardiotomy mechanical circulatory support. Material and Method: Between March 1993 and May 1995, we applied mechanical assist device using centrifugal pump to the 16 patients who failed to be weaned from cardiopulmonary bypass(n=15) or had been in cardiogenic shock in intensive care unit(n=1). The diagnosis were all congenital heart diseases and the ages of patients ranged from 20 days to 10 years (mean age=2.5$\pm$3.5 years). Result: The methods of mechanical circulatory support were LVAD(n=13), BVAD (n=1), and ECMO(n=2). The mean assist times were 54.0$\pm$23.7 hours. Post-assist complications were in orders: bleeding, acute renal failure, ventricular failure, respiratory failure, infection, and neurologic complication. It was possible for 9 patients(56.3%) to be weaned from assist device and 5 patients(31.3%) were discharged from hospital. There was no statistical significant between hospital discharged group and undischarged group by age, body weight, cardiopulmonary bypass time, and assist time. Conclusion: The ventricular assist device is an effective modality in salvaging the patient who failed to be weaned from cardiopulmonary bypass, but multiple factors must be considered for improving the results of mechanical circulatory support ; such as patient selection, optimal time of starting the assist device, and prevention and management of the complications.

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.247-250
• /
• 2000

Recently, some authors reported that discogenic low back pain should be regarded as a referred pain in respect of neural pathway. The afferent pathways of discogenic low back pain is transmitted mainly by sympathetic afferent fibres from the sinuvertebral nerves in the second lumbar nerve root. This pain arises from the lumbar intervertebral discs, and it had been transmitted mainly through the sympathetic afferent fibres contained in the second lumbar spinal nerve root. Second lumbar dermatome corresponds to the low back area. We experienced a case of low back pain which could not be controlled by conventional therapy and progressed wax and wane. The CT finding showed bulging disc between $L_4$ and $L_5$ and spinal stenosis in $L_4$ area. And epiduroscopic feature showed severe adhesion in $L_4$, $L_5$ and $S_1$. After we blocked $L_2$ root, pain score decreased 10 to 2. Therefore, the $L_2$ root block may be a useful diagnostic procedure as well as provide therapeutic value.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.2
• /
• pp.43-46
• /
• 2015

Arthroscopic treatment has been reported to provide effective improvement of ankle function when used in treatment of small osteochondral lesion of talus; however, favorable long-term results have been less predictable for large osteochondral lesion of talus. In cases in which primary arthroscopic treatment fails, the decision regarding which subsequent technique to choose has become increasingly difficult, as good clinical outcomes may be unlikely for such patients irrespective of the surgical technique used. Redomicrofracture should be used judiciously for treatment of osteochondral lesion of talus in which arthroscopic treatment has failed.