• 제목/요약/키워드: Fade

검색결과 216건 처리시간 0.021초

Microwave 채널 환경에서 단일적응등화기를 이용하는 OFDM/QPSK-DMR 시스템의 성능 분석 (Performance Analysis of OFDM/QPSK-DMR System Using One-tap Adaptive Equalizer over Microwave Channel Environments)

  • 안준배;양희진;조성언;오창헌;조성준
    • 한국정보통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.517-522
    • /
    • 2004
  • 본 논문에서는 마이크로웨이브 채널 환경에서 대역제한필터(BL-PSF)를 이용하는 OFDM/QPSK-DMR 시스템의 성능개선에 관한 연구를 수행하였다. 성능개선을 위해 단일적응등화기(one-tap adaptive equalizer)를 OFDM/QPSK-DMR 시스템에 적용하였으며, 단일 반송파방식의 DMR 시스템과 BER 및 특성 곡선(signature curve) 성능을 비교분석하였다. 시뮬레이션 결과 마이크로웨이브 채널 환경에서 OFDM/QPSK-DMR 시스템에 단일적응등화기를 적용한 경우, 부 반송파의 수가 16일때 단일 반송파방식의 DMR 시스템보다 2 dB 이상의 페이드 마진을 갖는다. 그리고 OFDM/QPSK-DMR 시스템의 부 반송파의 수가 많을수록 페이드 마진이 더욱 증가하여 성능이 향상 되는 것을 알 수 있었다.

두 종의 고체윤활제에 따른 마찰재의 마찰성능에 관한 실험적 고찰 (Experimental Investigation on Friction Performance of Brake Linings with Two Different Solid Lubricants)

  • 김성진;배은갑;윤호규;장호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.72-78
    • /
    • 2001
  • An experimental investigation was conducted to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb$_2$S$_3$). In order to investigate the effect of the solid lubricants on brake performance, three different friction tests (pressure, speed, and temperature sensitive tests) were carried out using a scale dynamometer. The test results showed that the friction characteristics were strongly affected by the type and the amount of solid lubricants in the brake lining. It was found that the brake linings with both solid lubricants were better in friction stability due to the complementary role of the two disparate lubricating properties at various pressure and speed conditions. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high temperature friction test.

  • PDF

고체 윤활제의 특성에 따른 반금속계 마찰재의 마찰 마모특성에 관한 연구 (Tribological Properties of Semi-metallic Brake Friction Materials Containing Different Solid Lubricants: Graphite, $WS_2$, and $MoS_2$)

  • 장호;신민욱;김윤철;정동윤
    • Tribology and Lubricants
    • /
    • 제25권1호
    • /
    • pp.61-65
    • /
    • 2009
  • Tribological properties of the semi-metallic friction materials containing different solid lubricants (graphite, $WS_2$, $MoS_2$) were investigated. The friction materials were fabricated with an experimental formulation and tested with gray cast iron disks. Results showed that graphite contributed to stabilize the friction coefficient during run-in processes. Also, graphite provided better fade resistance than that of $WS_2$ and $MoS_2$. At intermediate temperature ranges, however, friction materials with $WS_2$ or $MoS_2$ maintained higher friction effectiveness than that of graphite. On the other hand, friction materials containing $MoS_2$ showed increased wear rates than that with graphite or $WS_2$. Friction materials with proper combinations of two solid lubricants showed better friction and wear properties than that of the friction materials containing single solid lubricant.

친환경 법규 대응을 위한 복합재 브레이크의 Cu Free 마찰재 개발에 관한 연구 (A Study on the Development of Cu Free Friction Material of Composite Brake to Response Eco-friendly Regulation)

  • 심재훈;이중희;신웅희;임동원;현은재
    • 자동차안전학회지
    • /
    • 제14권2호
    • /
    • pp.90-95
    • /
    • 2022
  • Composite material is widely used in the automotive industries because it has excellent mechanical properties and is possible to reduce weight due to the low density. However, there is a new obstacle to meet environment regulation like Cu less or Cu free regulation for the friction material. Although it is strongly demanded, there are few research results about that unfortunately. Unless this problem is not solved properly, it is impossible to apply composite brake system to vehicle. In this paper, a new eco-friendly friction material for composite brake system is represented to respond these regulations. To do this, friction characteristics between existing low steel friction material and new eco-friendly friction material are verified to secure performances for brake system such as effect characteristic, fade characteristic and wear characteristic. And composite brake gets the equivalent or better performance compared to a low steel friction material. Finally, this result contributes to the study of major principles for the development of eco-friendly friction material in the future.

M/W 중계 시스템 망의 주파수 조정을 위한 보호비 계산에 대한 연구 (A Study on Calculation of Protection Ratio for Frequency Coordination in Microwave Relay System Networks)

  • 서경환
    • 한국전자파학회논문지
    • /
    • 제17권2호
    • /
    • pp.139-147
    • /
    • 2006
  • 본 논문에서는 마이크로파 중계 시스템 망의 주파수 조정에 적용할 수 있는 효율적인 보호비 산출 방법을 제안하고 결과를 제시한다. 또한 인접 채널 보호비를 계산하기 위해 송신 스펙트럼 마스크와 수신 필터 특성에 관련된 통합 필터 변별도(NFD)를 고찰하였다. 보호비는 변조 방식에 따른 신호-대-잡음 비, 잡음-대-간섭 비, 다중 간섭 허용, 다중 경로 또는 강우 감쇠의 페이드 마진, 통합 필터 변별도의 변수들로 구성된다. 주파수 6.7 GHz, 64-QAM, 거리 60 km, BER $10^{-6}$에서 계산된 페이드 마진 및 보호비는 각각 41.1 및 75.2 dB를 얻을 수 있었다. 채널 대역폭 40 MHz의 NFD는 첫 번째 인접 채널에서 28.9 dB가 되며, 이로부터 첫 번째 인접 채널의 보호비는 46.3 dB가 됨을 알 수 있었다. 또한 실제 중계망의 적용을 위해 채널 대역폭 20 및 40 MHz를 갖는 이종 시스템간의 NFD 및 보호비도 고찰하였다. 제안된 방법은 계산의 용이성과 체계적 확장, 그리고 밀리미터파 중계망의 주파수 조정에도 동일한 개념을 적용할 수 있는 장점을 갖는다.

A Simple If In-Phase Combiner and Its Performance for Point-to-Point Radio Relay System with Space Diversity

  • Suh Kyoung-Whoan
    • Journal of electromagnetic engineering and science
    • /
    • 제5권1호
    • /
    • pp.1-7
    • /
    • 2005
  • The implementation of a simple analog in-phase combiner is presented for a high capacity radio relay system with space diversity. It provides good performance in terms of simple hardware and easy control, and measured results are in good agreement with simulated ones. To suggest practical applications, signatures with/without diversity are measured for STM-1 signal of 64-QAM radio relay system combined with a 13-tap equalizer, and they provided more than 25 dB fade depth at 10$^{-3}$ BER under the frequency selective fading condition.

면 데님 가먼트의 인디고 염색에 관한 연구

  • 진성룡;이명학;홍현필
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 1998년도 가을 학술발표회논문집
    • /
    • pp.174-177
    • /
    • 1998
  • 기존의 인디고 염색 방법은 데님용 실을 여러 가닥 합하여 로프 형태로 만든 다음 정련조를 거쳐 미리 환원시켜 놓은 인디고 염액 박스 5~6개조를 빠른 시간에 통과시키면서 침지-공기 산화를 반복해 실을 링 염색시키는 방법을 사용하고 있다. 이렇게 실 형태로 링 염색시킨 인디고 선염사와 미염색사를 이용하여 제직하고 가먼트로 만든 후, 소비자가 요구하는 색상을 맞추기 위해 별도의 워싱(washing) 가공을 행하여 색상이 점차적으로 흐리게 되는 페이드 아웃(fade-out) 효과를 내는 제품으로 생산되고 있다. (중략)

  • PDF

밝기가 변하는 동영상 부호화를 위한 움직임 추정 (A Motion Estimation for Fade Image Coding)

  • 장현식;이정우;정주홍
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1998년도 학술대회
    • /
    • pp.193-196
    • /
    • 1998
  • 본 논문에서는 동영상 부호화에 있어서의 영상 간 중복성을 제거하기 위한 수단으로 사용되는 움직임 추정 방식에 관련된 내용으로 특히 밝기가 변하는 영상에 대해 부호화 성능을 높여 주는 움직임 추정방식에 대해 부호화 제안하였다. 제안한 움직임 추정은 기존의 평균 절대 오차나 평균 제곱 오차를 기반으로 하는 기존의 움직임 추정에 의한 움직임 벡터와 매크로블록 간 오차의 최소 분산을 가지는 움직임 벡터 중 부호화 시 적은 비트를 필요로 하는 움직임 벡터를 이용함으로써 일반 영상에는 기존의 방법과 유사한 부호화 성능을 나타내고, 화면의 밝기가 급격하게 변하는 영상에서는 기존의 방법보다 우수한 부호화 성능을 나타내도록 하는 방법이다.

  • PDF

조직의 직무만족에 관한 연구관점 (The research perspectives of job satisfaction in organization)

  • 이원행
    • 산업융합연구
    • /
    • 제9권1호
    • /
    • pp.67-78
    • /
    • 2011
  • It is revealed that there is still considerable interest in job satisfaction and that a growing number of methods are being used to study satisfaction. In particular I reviewed studies using methodologies such as interviews, questionnaires, and diary studies. Overall. my review suggests that working roles change for individuals and theoretical perspectives fade or rise for scholars, the experience of job satisfaction continues to play a central role in understanding life at work.

  • PDF

$BaSO_4$$CaCO_3$ 자동차용 Brake Pad의 마찰 특성에 미치는 영향 연구 (The Study on the Effect on Friction Characteristics of Brake Pads With $BaSO_4$ and $CaCO_3$)

  • 정근중;김향래;김대환;송현우;최형기
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2004년도 학술대회지
    • /
    • pp.47-52
    • /
    • 2004
  • The purpose of this study is to investigate the friction characteristics of brake pads according to different ratios of $BaSO_4/CaCO_3$. Four brake pads with different ratios of $BaSO_4/CaCO_3$ were manufactured. The friction characteristics of brake pads were tested using 1/5 reduced scale tester. With increasing of the amount of $BaSO_4$ density and shear strength of brake pads were increased and hardness of brake pads were decreased. In effectiveness, the friction coefficient of brake pad was higher and the stability of friction coefficient was better as the ratio of $BaSO_4$ increased. In fade test, friction coefficient of B3 sample used only $CaCO_3$ was decreased rapidly. B1 sample showed a good noise performance without noise generation. The wear resistance of samples were decreased with increasing of the ratio of $CaCO_3$.

  • PDF