• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.895-906
• /
• 2018

The improvement project for school zone in Korea is occurring mostly in kindergartens and elementary schools in which children are mainly active, and is being promoted as part of measures to prevent children's traffic accidents. However, since the study on the essential installation facilities and proper level of safety facilities for School zone is lacking, this study relatively evaluated the efficiency of safety facility installation using DEA (Data Envelope Analysis) and suggested improvement plan. We built the facilities and incident data for 28 school zones in Hwaseong City. Six major facilities (Raised intersection, Raised crosswalk, Protective fence, Skid Proof, Speed hump, Speed cameras) that have proven to be effective in the preceding research were analyzed as input factors. As a result of the analysis, only 12 out of 28 showed efficiency and 16 out of efficiency. Effective groups of school zones were found to have fewer installed Protective fences, Skid Proof, and Speed cameras installations than school zones classified as ineffective groups. Protective fences were found to be efficient even if only 47% of the total extension of the school zone was installed, and the number of slip prevention facilities was 8.7 per square km. The number of subjects to be compared is 28, so this study is limited to use as a relative efficiency evaluation index, and it can be grouped into nationwide units and efficiency evaluation can be done for each group.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.585-592
• /
• 2017

Most sewer lines buried in the city are likely to be collapsed due to serious aging. Also, due to the high concentration of development and high population density and traffic, the collapse of the sewer will cause enormous social and economic damage. Therefore, proactive maintenance is required to prevent accidents caused by deteriorated sewer pipe. In order to utilize limited budget effectively, risk-based prioritization methods should be proposed that simultaneously consider the consequence of failure and the probability of failure. In this study, the method of risk-based prioritization of sewer was examined by reviewing various cases of overseas studies and applied to the urban sub-catchment. First, the impact factors that can be secured through the sewer GIS DB in Seoul were derived, and the weight, sub-criteria, and impact score of each impact factor were determined and the consequence of failure was calculated by weight sum method. In addition, the probability of failure was calculated by dividing the service life by the estimated useful life, and the consequence of failure and the probability of failure were classified into five grades by the Jenks natural breaks classification method. The prioritization method was applied to sub-catchment in the Seoul to derive a risk matrix and a risk grade. As a result, 26% of all subjects were selected as the inspection priority subjects with 4-5 risk grade. Therefore, using the risk-based CCTV prioritization methodology, it will be possible to systematically determine the objects that need investigation first.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.174-180
• /
• 2020

With the removal of underwater obstacles in the Busan New Port, the water depth of the pier has been secured up to 17m, and the port authority is constantly responding to the trend of container vessels becoming larger. Also, in 2020, 24,000TEU class container ships are entering to the port, and it is planned to secure the depth in the port to 23 m later in line with this trend. Mega container ships must check in advance the factors to be considered depending on the situation at the time, and for this, it is judged that information sharing among stakeholders is necessary. In this paper, to understand the effect of the corresponding route because of the mega container ships, a transit safety evaluation was conducted based on statistical data on ship entry and departure and maneuver characteristics of corresponding ships. The result showed that the transit of the mega container ships has increased up to 8.4% comparing to the risk of 4,000TEU class container ships. Additionally, safety measures such as minimum safety depth and tug operation plans were presented by gathering opinions on operational characteristics from the perspective of pilotage for safe transit in the Busan New Port area. Through this, it is considered that it will be possible to contribute to the prevention of accidents when entering and leaving the Busan New Port.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• Journal of Environmental Impact Assessment
• /
• v.25 no.1
• /
• pp.1-14
• /
• 2016

With the continuous expansion of highway network and its traffics, neighboring wildlife habitats are splitted into smaller and more isolated patches. The infrastructures contribute to the wildlife-vehicle collision by creating barriers to animal movement. This kinds of traffic accidents are dangerous factors to the drivers' safety and the facilities on the highway as well as to the wildlife themselves. One of the most common ways to prevent habitat fragmentation are fauna crossings and fences. The cost of the mitigation measures to prevent wildlife-vehicle collision could be monetized. However their economic benefits are difficult to be measured. Using contingent valuation method, this study tries to estimate the economic valuation of wildlife collision prevention projects on the Korean highways. The result shows that 43.88% of Korean household had the positive willingness pay to the projects. Moreover, we found that the recognition of the project or the favourable attitude to the environmental issues could raise the willingness-to-pay. Therefore, active public relation on the project could make the friendly public opinion and increase the number of the household which has the positive willingness-to-pay on the project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.105-114
• /
• 2019

Recently, the paradigm of road policy has been focused on user safety. Recently, the number of road facility improvement project has been continuously increased but the economic feasibility (B/C ratio) is insufficient. Therefore, it is necessary to select a reasonable road improvement project through accurate and objective analysis of the road safety evaluation. In this study, to develop a new road safety evaluation method, data were collected based on the current road safety evaluation method for 75 routes including national roads and provincial ones. Based on the collected data, problems were analyzed and utilized as the basic factors of the new road safety evaluation method. Therefore, in this study, traffic accidents were reflected as a general evaluation item by weighing to solve these problems, and the evaluation items were added from experiences and ideas of the local public officials. For each evaluation item, a reasonable weight was determined through AHP (Analytic Hierarchy Process) questionnaire evaluation with highway experts. In addition, the safety index was determined based on the evaluation criteria for each evaluation item. The criteria for evaluating the danger zone are determined by the overall safety index. Finally, the criteria for selection of road improvement projects based on the overall risk level were derived.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.707-718
• /
• 2007

Recently, much studies for providing mobile users with suitable and useful content services, LBS(Location Based Service) corresponding to the change of users' location, are actively going on. First and foremost, this is basically owing to the progress of location management technologies such as GPS, mobile communication technology and the spread of personal devices like PDA and the cellular phones. Besides, the research scope of LBS has been changed from vehicle tracking and navigation services to intelligent and personalized services considering the changing information of conditions or environment where the users' are located. For example, it inputs the information such as heavy traffic, pollution, and accidents. The query languages which effectively search the stored vehicle and environment information have been studied depending on the increase of the information utilization. However, most of existing moving object query languages are not enough to provide a recommendation service for a user, because they can not be tested and evaluated in real world and did not consider changed environment information. In order to retrieve not only a vehicle location and environment condition but also use them, we suggest a moving object query language for recommendation service and implement a moving object query process system for supporting a query language. It can process a nearest neighbor query for recommendation service which considers various attributes such as a vehicle's location and direction, environment information. It can be applied to location based service application which utilizes the recommended factors based on environmental conditions.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.71-77
• /
• 2013

Most of the maritime accidents are the crash that occurred by complex coastal terrain, increased maritime traffic and frequent weather changes. Therefore, transportation safety is exactly determined using accurate environmental informations, but if informations are inaccurate or insufficient, accident risk can be increased. Therefore, ship need the system that can accurately generate transportation safety information. This paper proposes the transportation safety system and performance evaluation in the real environment. The proposed system includes database of environment informations and navigation algorithm using PPP method to estimate the accurate ship position. Therefore, this system can accurately calculate distance or freeboard between ship with other factors. Futhermore, when weather is deteriorated, crew can sail with database based 3-D monitoring module in the transportation safety system. To verify the function and performance, data of Kyungin ARA waterway and ferry is used to evaluation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.281-293
• /
• 2020

Recently, large and small fires have been happening more often in Korea. Fire is one of the most frequent disasters along with traffic accidents in korean cities, and this frequency is closely related to the land use and the type of facilities. Therefore, in this study, the significance of fires was analyzed by considering land use, facility types, human and social factors and using 10 years of fire data in Jinju city. Based on this, OLS (Ordinary Least Square) regression analysis, SLM (Spatial Lag Model) and SEM (Spatial Error Model) using space weights, were compared and analyzed considering the location of the fire and each factor, then a statistical model with high suitability was presented. As a result, LISA analysis of spatial distribution patterns of fires in Jinju city was conducted, and it was proved that the frequency of fires was high in the order as follow, central commercial area, industrial area and residential area. Multiple regression analysis was performed by integrating demographic, social, and physical variables. Therefore, the three models were compared and analyzed by applying spatial weighting to the derived factors. As a result of the significance test, the spatial error model was analyzed to be the most significant. The facilities that have the highest correlation with fire occurrence were second type neighborhood facilities, followed by detached house, first type neighborhood facilities, number of households, and sales facilities. The results of this study are expected to be used as significant data to identify factors and manage fire safety in urban areas. Also, through the analysis of the standard deviation ellipsoid, the distribution characteristics of each facility in the residential area, industrial area, and central commercial area among the use areas were analyzed. In, the second type neighborhood facility with the highest fire risk was concentrated in the center. The results of these studies are expected to be used as useful data for identifying factors and managing fire safety in urban areas.