• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.25-28
• /
• 1993

This study is designed for analyzing the properties of super-workable concrete with the parmeter of water contens, S/A , superplasticizer kinds, superplasticizer dosage and cement replacement method of pozzolanic admixture. And this study is aimed for presenting the reference data in practical use of super-workable and high-performance concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.951-956
• /
• 2000

Blast furnace slag powder(BFS) is potential hydration material, and that usage is increased the construction. But, the amount of BFS is important factor with the properties of concrete. The determinational method of slag powder experiments by salicylic acid-methyl alcohol solution method. From these results we can determine the amount of slag powder with blaine 4, 000 and 6, 000 in fresh concrete.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.412-415
• /
• 1994

The fundamental assumption that thresholds exist for noncarcinogenic toxic effects of chemicals is reviewed; this assumption forms the basis for the no-observed-effect level/ safety-factor (NOEL/SF) approach to risk assessment for such effects. The origin and evolution of the NOEL/SF approach are traced, and its limitations are discussed. The recently proposed use of dose-response modeling to estimate a benchmark dose as a replacement for the NOEL is explained. The possibility of expanding dose-response modeling of non carcinogenic effects to include the estimation of assumed thresholds is discussed. A new method for conversion of quantitative toxic responses to a probability scale for risk assessment via dose-response modeling is outlined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.117-123
• /
• 2007

This paper is about the economic analysis of the replacement of electric facilities in the production facilities. As the interest of energy is increasing, the efficiency of facilities become more important. So, in this paper, we diagnosed facilities, especially electric motors, in the plant and calculated the operating efficiency, power loss with the load factor. And when we replace these facilities into high-efficiency motors, we also calculated new energy efficiency, energy loss and economic analysis through capital recovery factor. As a result, we economically proved that using high-efficiency motor is more beneficial than using non-high-efficiency motors in the model process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.123-134
• /
• 2007

A method to determine the initial force of external tendon is proposed to improve the load carrying capacity in existing steel-concrete composite bridges. This method is applied to tensioning external tendons prior to and after concrete replacement for strengthening composite girders. A procedure to determine the number of tendon and initial tendon force is described with the proposed rating factor, which considers the increment of tendon force due to live loads. The method is applied to the improvement of rating factor in an existing composite bridge and its validity is confirmed.

• Journal of Chest Surgery
• /
• v.37 no.4
• /
• pp.328-334
• /
• 2004

There are only limited numbers of reports about long-term results of tricuspid valve replacement(TVR) with bioprosthetic and mechanical prostheses. We analyzed risk factors for tricuspid valve replacement and compared long-term clinical results of bioprosthetic and mechanical valves in tricuspid position. Material and Method: We reviewed 77 cases of TVR, which were performed between October 1978 and December 1996. Mean age was 38.8 15.9 years. Bioprostheses were implanted in 26 cases and mechanical prostheses were implanted in 51 cases. Result The operative mortality was 15.6% and late mortality was 12.3%. Survival for bioprosthetic and mechanical valve group at 5, 10 and 13 years was 81.3% vs. 100%, 66.1% vs. 100%, 60.6% vs. 100% (p=0.0175). Free from valve related re-operation for bioprosthetic and mechanical valve group at 5, 10 and 13 years was 100% vs. 93.9%, 100% vs. 93.9% and 58.3% vs. 93.9% (p=0.3274). Linealized incidences of valve related re-operation for bioprosthetic and mechanical valve group was 2.27 %/patient-years and 1.10 %/patient-years. Risk factor analysis showed that presence of preoperative ascites, hepatomegaly larger than 2 finger breaths, poor preoperative NYHA functional class and number of tricuspid valve replacement were risk factors for early mortality, and the use of bioprosthetic valve and number of open heart surgery were risk factors for late mortality. Conclusion: Long-term survival of mechanical valve was superior to bioprosthetic valve in tricuspid position. We recommend mechanical valve in tricuspid position if the patient can be closely followed up.

• Progress in Medical Physics
• /
• v.29 no.3
• /
• pp.92-100
• /
• 2018

The manufacturer of a linear accelerator (LINAC) has reported that the target melting phenomenon could be caused by a non-recommended output setting and the excessive use of monitor unit (MU) with intensity-modulated radiation therapy (IMRT). Due to these reasons, we observed an unexpected beam interruption during the treatment of a patient in our institution. The target status was inspected and a replacement of the target was determined. After the target replacement, the beam profile was adjusted to the machine commissioning beam data, and the absolute doses-to-water for 6 MV and 10 MV photon beams were calibrated according to American Association of Physicists in Medicine (AAPM) Task Group (TG)-51 protocol. To verify the beam data after target replacement, the beam flatness, symmetry, output factor, and percent depth dose (PDD) were measured and compared with the commissioning data. The difference between the referenced and measured data for flatness and symmetry exhibited a coincidence within 0.3% for both 6 MV and 10 MV, and the difference of the PDD at 10 cm depth ($PDD_{10}$) was also within 0.3% for both photon energies. Also, patient-specific quality assurances (QAs) were performed with gamma analysis using a 2-D diode and ion chamber array detector for eight patients. The average gamma passing rates for all patients for the relative dose distribution was $99.1%{\pm}1.0%$, and those for absolute dose distribution was $97.2%{\pm}2.7%$, which means the gamma analysis results were all clinically acceptable. In this study, we recommend that the beam characteristics, such as beam profile, depth dose, and output factors, should be examined. Further, patient-specific QAs should be performed to verify the changes in the overall beam delivery system when a target replacement is inevitable; although it is more important to check the beam output in a daily routine.

• Korean Journal of Community Nutrition
• /
• v.24 no.4
• /
• pp.300-308
• /
• 2019

Objectives: This research was conducted to identify the consumers' food choice factors that affect the consumers' replacement of soft drinks with carbonated water. Methods: The present study used secondary data from a consumer panel survey conducted by the Rural Development Administration of Korea, and the data included the panel members' purchase records based on their monthly spending receipts. The survey asked the participants about their food choice factors and their personal responsibility for their health. This survey included independent variables for the consumers' food purchase factors. As a dependent variable, two types of groups were defined. The replacement group included those people who increased their purchase of carbonated water and decreased their purchase of soft drinks. The non-replacement group included those people who did not change their purchase patterns or they increased their purchase of soft drinks and they decreased their purchase of carbonated water. Logistic regression analysis was conducted to determine the consumers' food choice factors that were associated with replacing soft drinks with carbonated water. Results: The replacement group was significantly associated with (1) a younger age (OR=0.953), (2) being a housewife (OR=2.03), (3) higher income (OR=1.001) and (4) less concern about price (OR=0.819) when purchasing food. This group also showed (5) higher enjoyment (OR=1.328) when choosing food and (6) they took greater responsibly for their personal health (OR=1.233). Conclusions: This research is the first study to mainly focus on soft drinks and carbonated water. The result of this research showed that young, health-conscious consumers with a higher income and who are more interested in food have more possibilities to replace soft drinks with carbonated water. These research findings may be applied to consumers who have characteristics that are similar to the young health-conscious consumers and the results can help to suggest ways to reduce sugar intake and improve public health. However, this research has a limitation due to the application of secondary data. Therefore, a future study is needed to develop detailed survey questions about food choice factors and to extend these factors to all beverages, including soft drinks made with sugar substitutes, so as to reflect the growth of alternative industries that use artificial sweeteners or different types of sugar to make commercially available drinks.

• Resources Recycling
• /
• v.33 no.3
• /
• pp.12-20
• /
• 2024

The global cement industry emits approximately 2.9 billion tons of greenhouse gases, of which 1.74-1.89 billion tons are emitted from limestone, which is the main raw material for clinkers. Therefore, the feasibility of using slag, a non-carbonated CaO-based raw material, must be investigated, and the physical properties of cement must be considered. In this study, the mixing ratios of the raw mix and properties of cement were analyzed. The CaCO₃ replacement ratio was limited when one type of slag was used; however, when the mixed slag was utilized, the CaCO₃ replacement ratio increased by more than 12 %. The compressive strength of the slag-incorporated cement was lower than that of Ordinary Portland Cement (OPC). Therefore, the lime saturation factor (LSF) of the raw mix and fineness of the cement were increased to improve the compressive strength. The compressive strength of cement with improved fineness was similar to that of OPC for a CaCO₃ replacement ratio of up to 6 %, and it decreased as the CaCO₃ replacement ratio was increased to 9 %. When both fineness and LSF were increased, the compressive strength and flow value of the cement with a CaCO₃ replacement ratio of 12 % were similar to that of OPC.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.223-226
• /
• 2002

This study is performed to investigate the influence of aggregate factor on the estimation of water content in fresh concrete. According to the results, water content is estimated higher in the case of basalt and granite aggregate than in the case of limestone because absorption water ratio of basalt and granite is large. As the replacement ratio of recycled aggregate increases, water content is estimated higher. But, after correcting absorption water ratio of aggregate, estimated water content is similar to mixture water content. Therefore, it is important to know the absorption water ratio of aggregates accurately, to estimate water content.