• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.231-238
• /
• 2004

R/C교량에서 진행성 균열과 과도한 처짐에 의한 휨 내력의 저하는 차량하중에 의한 동적 반복하중으로부터 발생한다. 이러한 사실은 정적인 단조증가 하중 재하실험으로부터 획득한 자료의 동적 반복하중에서의 확인과 평가의 필요성을 제기한다. 따라서, 본 연구는 CFS로 보강된 R/C보를 단조증가하중 재하실험과 반복하중 재하실험을 동시에 수행하였다. 동적 반복하중 재하실험에 의하여, 단조증가하중 재하실험에 의한 결과의 타당성 및 적합성을 확인하고 반복하중에 의한 모멘트-곡률, 휨 강도의 감소, 균열 및 파괴 특성 등을 평가하였다.

• 한국IT서비스학회지
• /
• 제12권3호
• /
• pp.345-377
• /
• 2013

Government agencies have many difficulties for the information system development and operation. One of the difficulties is a budget estimation. Each government agency suggests individually different estimation for the personnel expenses and IT infrastructure adoption costs in the same field of informatization promotions. The other one is the operation costs are increased exponentially in every year[42, 51]. Those difficulties make government agencies can not help adopting SaaS. In fact, most of IT consulting company and government agencies already recognized a variety of SaaS advantages. The most typical SaaS's advantages are cost reduction, Software rapid development and deployment. However, once government agencies decide to adopt SaaS, they can not avoid many problems and difficulties. There is no information in a detailed item in a budget. In those kinds of situation, there is no choice whether government agencies accept SaaS provider's suggesting adoption costs or not. Thus, we provide a sheet of SaaS adoption cost estimation to government agencies. To know the cost factors, this study uses TCO(Total Cost of Ownership)'s criteria. To give a management point, this study uses Gartner's Application development Life Cycle. In this study, the integration check framework which is SaaS adoption cost estimation makes government agencies possible to establish a adequate budget.

• 산업기술연구
• /
• 제24권A호
• /
• pp.29-35
• /
• 2004

Fine blanking can be considered as a manufacturing process capable of producing sheet metal parts with completely smooth edges that may be hardly obtained by conventional shear-cutting procedures. This fact, together with the considerable economic advantages offered by this process, has been responsible for the rapid acceptance of fine blanking throughout the manufacturing industry all over the world, and the discovery of many new applications. This study was performed to investigate the effect of clearance and V-ring shape on the quality of sheared surface in a fine blanking process. The critical value needed to apply the normalized Cockcroft-Latham fracture criterion to the simulation of fine blanking is obtained by correlating the result of finite element analysis and that of experiment for the uniaxial tensile test. From finite element analysis of an axisymmetric fine blanking process, it has been found that punch load, die-roll depth, burnish zone size and shape of sheared surface are considerably influenced by clearance and V-ring shape.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.408-413
• /
• 2016

The dielectric thin films applied to multi-colored semitransparent thin film solar cells have been extensively studied. In this work, we prepared GeSbTe and GeTe chalcogenide thin films using magnetron sputtering, and investigated their optical and phase-change properties to replace the dielectric films. The changes of surface morphology, sheet resistance, and X-ray diffraction of the Te-based chalcogenide films support the fact that the amorphous stability of GeTe films is superior to that of GeSbTe films. While both amorphous GeSbTe and GeTe films thinner than 30 nm have optical transparency between 5% and 60%, GeTe films transmit more visible light than GeSbTe films. It is confirmed by computer simulation that the color of semitransparent silicon thin film solar cells can be adjusted with the addition of GeSbTe or GeTe films. Since it is possible to adjust the contrast of the solar cells by exploiting the phase-change property, the two kinds of chalcogenide films are anticipated to be used as an optical layer in semitransparent solar cells.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.13-22
• /
• 2020

This research explores the appropriate rubber pricing model and the consistent empirical evidence. This model has been derived from the utility function and firm profit-maximization model of commodity goods. The finding shows that the period t - 1 affects expected commodity price and expected profit of commodity production. In fact, a change in the world price of rubber in the past period led to a change in the expected price of rubber in the short run which influenced the expected rubber profit. As a result, the past-period free on board price has an entirety effect on expected farm price of rubber given an exchange rate. In addition, the rubber pricing model indicates that the profit of local farmer on rubber plant depends solely on the world price of rubber in the short run in case of Thailand. In an empirical study, it was found that a change in the price of ribbed smoke sheet 3 in Singapore Commodity Exchange significantly and positively determined the fluctuation of rubber price at the farm gate in Thailand which was consistent with the behavior of the Thai farmers. Both prices are also cointegrated in the long run. That is, the result states that the VECM is an appropriated pricing model for forecasting the farm price in Thailand.

• Ocean Systems Engineering
• /
• 제5권2호
• /
• pp.125-138
• /
• 2015

In this study, hydrodynamic performance of a 400 mm diameter horizontal axis marine current turbine model was tested in a cavitation tunnel with 1.21 m x 0.8 m cross-section for over a range of tip speed ratios. Torque and thrust data, as well as cavitation visualizations, for certain operating conditions were acquired. Experimental results indicated that the turbine can be exposed to significant amount of sheet and cloud cavitation over the blades along with vortex cavitation at the blade tips. Inception and distribution of cavitation along the blades of the model turbine were then modelled numerically for design operating conditions using a vortex lattice method. The method was also applied to a turbine tested previously and obtained results were compared with the data available. The comparison between simulation results and experimental data showed a slight difference in terms of span-wise extent of the cavitation region. The cloud and tip vortex cavity observed in experiments cannot be modelled due to the fact that the VLM lacks the ability to predict such types of cavitation. Notwithstanding, the use of such prediction methods can provide a reasonably accurate approach to estimate, therefore take the hydrodynamic effects of cavitation into account in design and analysis of marine current turbines.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.27-35
• /
• 2010

In this study, we have developed the database of safety and health information for pesticide active ingredients used in Korea. There were 1,283 pesticide items among which 296 were found to be out of use in current. A total of 349 pesticide ingredients were being used in Korea. The database consists of 32 types of information including chemical characteristics, acute toxicity, chronic toxicity (carcinogenic and reproductive toxicity), specific symptoms by exposure route and first aid. When pesticide ingredients were assessed in terms of key properties such as color, odor, acute toxicity, carcinogenic and reproductive toxicity, they were white, colorless and odorless, in general. When ingredients were classified by category of acute toxicity, 'Non-hazardous' represented 29%, followed by 'Slightly hazardous' at 16%, 'Moderately hazardous' at 14%, 'Highly hazardous' at 5%, and 'Extremely hazardous' at 2%. 85 out of 349, or 24% of ingredients were found to be possibly carcinogenic to human. This database is expected to provide an easy access for farmers, agriculture supervisors, researchers and consumers, and it can ultimately be used as basic data on farmer's safety and health.

• 천문학회보
• /
• 제37권2호
• /
• pp.134.2-134.2
• /
• 2012

Discrete auroras, with unique shapes embedded in diffuse auroras, are generally associated with precipitating electrons that originate from the plasma sheet and are accelerated on the way as they travel to polar regions along the field lines. Two acceleration mechanisms have been proposed: quasi-static electric fields and dispersive Alfven waves, which are believed to yield monoenergetic peaks and broadband features in the particle spectra, respectively. Hence, it should be interesting to see how the two different mechanisms, through their characteristic spectra of the accelerated electrons, produce distinct auroral images and spectra, especially in the far ultraviolet (FUV) wavelengths as the long and short Lyman-Birge-Hopfield (LBH) bands exist as well as the strong absorption band of molecular oxygen in the FUV band. In fact, we have previously shown, using the simultaneous observations of precipitating electrons and the corresponding FUV spectra, that the discrete auroras associated with inverted-V events have a stronger relative intensity of the long LBH to the short LBH compared to diffuse auroras, especially when the peak energy is above a few keV. In this paper, we would like to focus on the differences in the FUV images and spectra between the two discrete auroras of the monoenergetic and broadband cases, again based on the study using the dataset of simultaneous observations of particles and FUV spectral images.

• 한국터널지하공간학회 논문집
• /
• 제6권3호
• /
• pp.213-225
• /
• 2004

일반 국도의 선형개량사업 및 도로 확포장 사업의 일환으로 터널의 수가 증가하고 있는 실정이다. 최근들어 집중호우 및 이상기후로 인하여 국지적인 강우가 발생하여 갱구사면의 붕괴도 적지 않게 발생하고 있다. 따라서, 국내의 터널 갱구사면 피해 및 유지관리를 효율적으로 대처할 필요성이 대두되었다. 본 연구는 일반국도변에 기설치 운영되고 있는 터널 갱구사면의 현황 및 상태에 대한 조사를 실시하고 수집된 데이터의 효율적인 관리를 위한 데이터베이스 시스템을 개발, 향후 유지관리를 위한 상태평가 기법을 개발하는 것이다. 연구방법으로는 국도변의 터널 갱구사면의 형태를 분석하기 위하여 현장 조사를 통하여 국내의 터널을 진입형태, 갱문형식, 터널 유형 등 기하학적인 형태에 따른 분석을 실시하였다. 수집된 자료의 효율적인 관리를 위해서 그래픽 사용자 인터페이스를 사용하여 입력, 수정 및 조회가 가능한 데이터베이스 관리 시스템을 개발하였고, 조사된 갱구사면의 위험상태에 대한 등급을 분류하기 위한 상태평가 기준표를 제시하고 이에 따른 등급을 분류하였다. 본 상태평가를 이용하여 국도변의 터널 갱구사면을 분류하여 위험 등급에 따라 향후 지속적으로 유지 관리를 실시할 수 있도록 기초자료로 활용하고자 하는 것이 주 목적이다.

• 자원환경지질
• /
• 제22권1호
• /
• pp.17-20
• /
• 1989

태백산(太白山) 광산대내(鎭山帶內) 장성도복(長省圖福)의 풍곡일대(豊谷一帶)에서 채취(採取)한 두 개(個)의 유문암질(流紋岩類)를 K-Ar 전암법(全岩法)으로 연령측정(年齡測定)하였다. 그 중(中), 유문암(流紋岩)은 $62.69{\pm}1.15Ma$, 유문암질응회암(流紋岩質凝灰岩)은 $51.67{\pm}6.64Ma$로 확인(確認)되었다. 일반적(一般的)으로 화산암(火山岩)의 K-Ar 전암연령(全岩年齡)은, 지질학적(地質學的)으로 이차적(二次的)영향을 받지 않았다면, 화산암(火山岩)의 형성연령(形成年齡)을 제시(提示)하나, 여기서 연령측정(年齡測定)한 두개의 유문암질암(流紋岩質岩)은 약간 열수변질(熱水變質)받았고, 유문암질암응회암(流紋岩質凝灰岩)이 유문암(流紋岩)의 연령(年齡)보다 약간 젊은 것으로 나타났다. 이들 암석(岩石)의 야외산출상태(野外産出狀態)는 정합적(整合的)인 고(故)로, 적어도 이들 두 유문암질암(流紋岩質岩)은 약(約) 60Ma보다 그 이전(以前)에 취출(嘴出)된 것으로 판단(判斷)된다.