• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.47-53
• /
• 1989

The effect of organic solvent in the dyeing of silk fiber by acid dye was investigated. Acetophenone and benzyl alcohol were shown to be the most effective for the rate of dyeing of silk fiber by Milling Cyanine 5R (C.I. Acid Blue 113), a milling type acid dye, but, with benzyl alcohol, the equilibrium dye uptake was much lower than that in the absence of it. In the presence of solvent, maximum dye uptake shifted to lower temperature than 6$0^{\circ}C$, while without solvent, it was shown at about $60^\circ{C}$. When dyed by Orange II (C.I. acid Orange 7) under same condition equilibrium dye uptake of silk fiber was lower than that for milling type acid dye, and in the presence of benzyl alcohol, still much lower uptake resulted. All these fact reveals that organic solvents in the solvent-assisted dyeing of silk fiber broaden micelle spacings too much, resulting in increased rate of dyeing, and decreased equilibrium dye uptake, contrary to wool.

• Computers and Concrete
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2017

In this study, two types of aggregate were used for making self-compacting concrete. Standard cubic specimens were exposed to different temperatures. Seventy-two standard cylindrical specimens ($150{\times}300mm$) and Seventy-two cubic specimens (150 mm) were tested. Compressive strengths of the manufactured specimens at $23^{\circ}C$ were about 33 MPa to 40 MPa. The variable parameters among the self-compacting concrete specimens were of sand stone type. The specimens were exposed to 23, 100, 200, 400, 600, and $800^{\circ}C$ and their mechanical specifications were controlled. The heated specimens were subjected to the unconfined compression test with a quasi-static loading rate. The corresponding stress-strain curves and modulus of elasticity were compared. The results showed that, at higher temperatures, Scoria aggregate showed less sensitivity than ordinary aggregate. The concrete made with Scoria aggregate exhibited less strain. The heated self-compacting concrete had similar slopes before and after the peak. In fact, increasing heat produced gradual symmetrical stress-strain diagram span.

• Microbiology and Biotechnology Letters
• /
• v.22 no.1
• /
• pp.1-6
• /
• 1994

We have studied the relation between Ca$^{2+}$-ATPase and trigger peptidase(TPase) which are membeane protein well known as their significant role for signal transduction of mating pheromone in heterobasidiomycetous yeast. Rhodosporidium toruloides. We found out that there were Ca $^{2+}$-ATPase and TPase together in isolated calmodulim binding protein(CBP), usion calmodulin affinity column chromatography after solubilization of mation type a cell membrane protein, and that the dependence of enzyme activity of both the enzymes on Ca$^{2+}$, phospholipid and nonionic detergent are similar. However, Ca$^{2+}$-ATPase hed quite absolute dependence on calmodulin and, on the other hand, TPase didn't have any dependence. Judging from the fact that there are both enzymes in CBP which the dependence of calmodulin are quite different, we found out that both enzymes were made to their compound and existed in mating type a cell membrane.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.85-90
• /
• 2013

The effects of contact pressure on the sliding wear behavior of mild steel in a pin-on-disc type apparatus were investigated. Sliding wear tests were conducted with various combinations of the load and apparent area of contact. The wear behavior of mild steel as a function of sliding speed was independent of contact pressure. However, the wear rate at different sliding speeds was influenced by the load regardless of the apparent area of contact. This was attributed to the fact that there may be no difference in the real area of contact for any combination of the load and apparent area of contact.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.44-50
• /
• 2017

To understand whether Falling, which is one of the causes of injuries, occurs, various behavior recognition research is proceeding. However, in most research recognize only the fact that Falling has occurred and provide the service. As well as the occurrence of the Falling, the risk varies greatly based on the type of Falling and the situation before and after the Falling. Therefore, when Falling occurs, it is necessary to infer the user's current situation and provide appropriate services. In this paper, we propose to base on Fog Computing and Cloud Computing to design Context-aware System using analysis of behavior data and process sensor data in real-time. This system solved the problem of increase latency and server overload due to large capacity sensor data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.219-225
• /
• 1991

The characteristics of a power plant changes as it operates for a long time and/or for different operating points. As a result, operators must retune gains of the controllers for better performance. In fact, skilled operators can retune the gains in reference to recorded data obtained by a test called dynamic test. The dynamic test, however, requires much time, and can be heavy burden for operators. In this paper, an expert knowledge-based auto-tuner is designed for drum-type boiler controllers of a fossil power plant using fuzzy logic. The performance of the proposed auto-tuner is shown via computer simulation and the simulation results show that the proposed auto-tuner is satisfactory for the desired performance.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.8
• /
• pp.73-83
• /
• 2017

In this paper, we discuss the differences between an ordinary B-tree and B-tree implemented by NTFS. There are lots of distinctions between the two B-tree, if not understand the distinctions fully, it is difficult to utilize and analyze artifacts of NTFS. Not much, actually, is known about the implementation of NTFS, especially B-tree index for directory management. Several items of B-tree features are performed that includes a node size, minimum number of children, root node without children, type of key, key sorting, type of pointer to child node, expansion and reduction of node, return of node. Furthermore, it is emphasized the fact that NTFS use B-tree structure not B+structure clearly.

• Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.34-40
• /
• 2016

A satellite is exposed to various impact environment until orbit entry. It is particularly undergoing the biggest impact by pyro shock, which is generated when the launch vehicle stages are separated or the satellite is separated from the launch vehicle. In this paper, due to the fact that the pyro shock is prerequisite for performing the test and verification on the ground, we developed an air-gun type shock tester for NEXTSat-1 shock test at the KAIST SaTReC along with the development of program introduced by LabVIEW software. The program operated in shock tester is consist of data measurement and analysis with the convenient implementation of user interface and its easy modification of the code.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2000

In order to perform a successful material cutting process, the operators are to select the suitable machining tools and cutting conditions for the cutting environment. Up to now, this has been a complicated procedure done by the data in the tool manufacturers' paper catalog and the operator's experiencial knowledge, so called heuristics. This research is motivated by the fact that using computer techniques in processing vast amount of data and information, the operator can determine the tool and cutting condition easily. In the developed program, the selection of milling cutter, insert, and components are combined to provide optimal cutting speed, depth of cut, feed rate, rpm, and power. This program also provides the selection routine for end mill, drilling, turning, and grinding where the suitable tools are selected by workpiece, holder type, cut type, and insert shape.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.393-400
• /
• 2005

As one of the useful and powerful methods for designing the optimum pump is using model pump, it is based on the similarity characteristics of turbomachinery. With this theory, we can predict the performance of various pumps. In fact we have performed huge pumps using this, the experimental results were to be sufficient to prove the similarity characteristics. In this study, we predicted the performance of the huge proto-type pump that cannot be installed and made a test. First of all, we had calculated the model ratio between proto-type and model. There were two ways to estimate the performance. One was the application of CFD code, and the other way was model field test. So We selected both of them to guarantee the dependable data and evaluated each other.