• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5333-5341
• /
• 2014

Recently, with the increasing interest in facility management based on indoor spatial information, various studies have been attempted to manage facility conversion between BIM and GIS. Visualization of the geometry data for a large-scale is one of the major issues to the maintenance system. Therefore, this study designed the spatial indexing algorithm through an IFC schema-based scenario for the effective visualization of BIM data based on GIS. A part of the algorithm was developed implementing the OcTree structure and this research has a test for the developed output with IFC sample data. Ultimately, we propose the spatial indexing method for the effective visualization of BIM data based on GIS.

• Mass Spectrometry Letters
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

China's rapid economic growth has resulted in significant environmental side effects. Therefore, China has been interested in reducing her dependence on foreign oil and gas by developing technologies needed for hydrogen, in addition to her increasing energy mix of nuclear and renewable energy form, such as solar and wind power. There are three isotopes of hydrogen, i.e. protium (P or H), deuterium (D), and tritium (T). Both deuterium and tritium are important materials in nuclear fuel cycle industry. Tritium is one of the critical radioactive nuclides. Planning for and implementing contamination control as a part of normal operation and maintenance activities is an important function in any hydrogen facility, especially tritium facility. The development of hydrogen isotopes analysis is the key issues in this area. Mass spectrometry (MS) with medium (about 600) and high resolution (> 1,400) is commercially available; however, the routine analysis of hydrogen isotopes is done with low-resolution MS (< 200) in China. This paper summarizes the progress of MS measurement technology for hydrogen isotope abundance in China, focusing on our lab's research program and technical status. An analyzing method has been introduced for accurate measurement of tritium abundance in the H.D.T system by low resolution MAT-253 MS. The quotient of compression ratio coefficient is determined by building up equipment for laboratory-scale preparation of secondary standard gases and by considering the difference in sensitivity between hydrogen isotopes. The results show that the measured value is reproducible within the relative error range of 0.8% for gas samples of different tritium abundance.

• Journal of the Korean Dietetic Association
• /
• v.18 no.3
• /
• pp.248-265
• /
• 2012

A total of 262 dietitians (in 97 college foodservices nationwide, 86 elementary school foodservices, and 79 middle & high school foodservices in the Changwon area) were given a survey questionnaire composed of 18 GMP and 29 SSOP items from May to July, 2011. As a whole, total usage level of GMP facilities (3.65/5 points) and total management level of SSOP (3.86) in college foodservices showed no significant differences compared to those in elementary school foodservices (GMP 3.74, SSOP 4.02) and middle & high school foodservices (GMP 3.75, SSOP 3.95). However, the results of this study suggest that seven items of the GMP facilities and five items of the SSOP should be improved for the development of the HACCP facility model in college foodservices. Those items that showed considerably lower points in GMP were as follows: 'Drain pipes from sinks of the cooking area are connected directly to the drain (3.74)' (P<0.001), 'The grease trap is installed outside the cooking area equipped with an oil separator (3.24)' (P<0.01), 'Entrance and the cooking area are adequately equipped with hand-washing and shoe disinfecting facilities (3.61)' (P<0.001), 'Cooking area, food storage, and dining area are adequately equipped with insect and rodent repellents (3.72)' (P<0.001), 'Cooking areas are equipped with air-conditioning/heating system and ventilation facility for maintenance of temperature and humidity (3.35)' (P<0.05), and 'Toilets for cooking staff only are provided; the its doorways are not directly accessible from the cooking area (3.25)' (P<0.01).

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.271-279
• /
• 2012

Among the community-based cultural facilities, public libraries are places for social and educational purpose that improve the education of the resident, the expansion of the basic cultural education, communication between the members of society, and the accumulations and preservations of the culture. Public libraries should be a local cultural facility that expresses the value of a community. This study aims to analyze the design expression of publicness in a public branch library as a community-based cultural space through the study of branch library in the U.S. This study focused on the most future-oriented and innovative Ten New Landmark Libraries in the United States selected by Library Journal magazine in 2011. Among the selected libraries, three branch libraries which belongs Arizona Maricopa County were included in the study. The results of this study are as follows. First, the sites of the branch libraries vary geographically, but the libraries increase accessibility are caused by unique appearances and design concept of intellectual interest. Second, the floor plan shows the separation of meeting rooms and faculty space from the public space and has visual and spatial open space by high ceiling of the reading room. Third, multi-functional public space for residents are meeting rooms, the external patios for reading, galleries, cafes, libraries-shops which provides a variety of cultural programs, activities, and the opportunity to socialize neighbors. Fourth, branch Libraries have unique designs that harmonizes with nearby places to reflect locality, giving the locals a sense of pride in their community. Fifth, concrete brick and metal panel were used as finishing material for the practicality of maintenance. In particular, transparent glass envelope allows the locals to stay for long time due to openness and brightness of space.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.182-192
• /
• 2008

The purpose of this research is to identify problems and solutions of domestic Life Cycle Cost analysis in BTL(Build-Transfer-Lease), a PFI(Private Finance Initiatives) project. It is expected BTL would be quite effective delivery method for public construction introducing the private's major capital investments and technologies, and obviously LCC analysis is becoming more important factor for success of BTL projects. Nevertheless, there are still some complicated issues in LCC analysis, a technique for selecting the optimal VE(Value Engineering) proposals and estimating OM&R (Operation, Maintenance, & Repair) cost of the buildings, and has been applied limitedly. This research mainly focuses on educational facility, as most frequently delivered by BTL currently, especially with two levels (Alternative LCC and Building LCC) , which is occupied main potion in BTL project. In addition, it identifies four main problems and suggests their solutions through case studies focusing six major factors (WBS, Repair Information, Life Cycle, Time value of money, Repair Information Database, LCC Model) from three projects. Advanced development of this research requires closer partnership between the private / public sectors, and their long term strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.478-484
• /
• 2013

Recently, the risk of safety accidents in the coastal zone has been increased due to revitalization of marine leisure and tourism. Because of a lack of regulations about technical and maintenance aspect for safety facilities, the effective measures to prevent safety accidents in the coastal zone have not taken with increasing rate of the accidents. The nature of land/sea and behavioral characteristics of a fisherman/port laborer/tourist/people at leisure should be taken into account properly when safety facilities to prevent safety accidents in the coastal zone are installed, since the characteristics of land/sea and many activities such as fishery, harbor works, tour, leisure are mixed in the geographic and environmental condition of the coastal zone. This study analyzes the current problems on the safety facility in the domestic coastal zone through the domestic and foreign(Hongkong, Macau) field survey. Also the direction of the improvement about the safety facility are proposed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.859-866
• /
• 2021

Agricultural Photovoltaic power generation is a new model that installs solar power generation facilities on top of farmland. Through this, it is possible to increase farm household income by producing crops and electricity at the same time. Recently, various attempts have been made to utilize agricultural solar power generation. Agricultural photovoltaic power generation has a disadvantage in that maintenance is relatively difficult because it is installed on a relatively high structure unlike conventional photovoltaic power generation. To solve these problems, intelligent and efficient operation and diagnostic functions are required. In this paper, we discuss the design and implementation of a prediction and diagnosis system to collect and store the power output of agricultural solar power generation facilities and implement an intelligent prediction model. The proposed system predicts the amount of power generation based on the amount of solar power generation and environmental sensor data, determines whether there is an abnormality in the facility, calculates the aging degree of the facility and provides it to the user.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.451-456
• /
• 2018

UAVs (Unmanned Aerial Vehicles) are widely used for maintenance and monitoring of facilities. It is necessary to acquire a high-resolution image for evaluating the appearance state of the facility in safety inspection. In addition, it is essential to acquire the video data in order to acquire data over a wide area rapidly. In general, since video data does not include position information, it is difficult to analyze the actual size of the inspection object quantitatively. In this study, we evaluated the utilization of 3D point cloud data of bridges using a matching between video frames and reference photos. The drones were used to acquire video and photographs. And exterior orientations of the video frames were generated through feature point matching with reference photos. Experimental results showed that the accuracy of the video frame data is similar to that of the reference photos. Furthermore, the point cloud data generated by using video frames represented the shape and size of bridges with usable accuracy. If the stability of the product is verified through the matching test of various conditions in the future, it is expected that the video-based facility modeling and inspection will be effectively conducted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.418-426
• /
• 2021

This study investigates the perception of radiation safety management in radiation generator manufacturing workers and medical institutions. The basic data obtained is further applied to improve active coping ability and safety levels. The knowledge and attitude practice score of radiation was found to be related to gender, age, marital status, occupation, position, current work period, total work period, radiation related work period, the manual available, defense facility maintenance, number of defense equipment, radiation safety education, special health examination, and recognition of radiation terms. In particular, the knowledge score of radiologists was highest among the radiation-related occupations (<0.05). Radiation safety management requires active defense endeavors to prevent radiation exposure, by both workers of radiation manufacturers and medical institutions. Moreover, institutional devices such as compliance with guidelines, periodic education, facility reinforcement, manual preparation, and special health checkups are required for efficient radiation safety management.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.557-563
• /
• 2020

Digital Twin Technology is currently being utilized in many industries and logistics seems soon to follow that trend. Currently, technology introduction to container terminals is restrictedly developing. In reviewing the existing literature, it became clear that research on the application of Digital Twin technology for container terminals is deficient. This study fulfilled AHP and IPA analysis causing fields to adjust priority at the container terminal. The result of analysis on the urgent necessity of adjustable fields' detailed elements from Digital Twin Technology, ATC, intelligent CCTV, and container yards, and showed that they were of the highest priority level. Also, VR/AR Equipment, AYT, Smart Container, Automated Container Delivery Facility, Refrigerated/Freezer Container, Wearable Device for Port Maintenance, and Smart Buoy were reviewed in detail. Our group suggests AQC, Berth, AGV, ASC, Apron, and Automated Mooring as potentially useful Digital Twin Technologies. Finally, our research suggests the OSS equipment, intermodal linkage facility, intelligent drone, and hazardous material storage are areas of low priority.