This study was intended to compare the diagnostic ability between Waters' radiograph and CT in the diagnosis of midfacial fracture. The study group included 44 patients(male:32, female :12, age range :16-74 years old) with facial injury who underwent surgery. Waters' radiograph and both axial and coronal scanning were performed before surgery. Three oral radiologists and three non-oral radiologist interpreted 44 Waters' radiographs and 88 CT in three ways; 1) interpretation using Waters' radiograph only, 2) interpretation using CT only, 3) interpretation using Waters' radiograph and CT. The interpretation sites were confined to the walls of maxillary sinus; anterior, posterior, medial, lateral and superior wall. ROC curves were made with the findings during surgery as a gold standard except the posterior wall, where the joint evaluation of Waters' radiograph and CT by other three oral radiologists was used. ROC areas were compared according to the interpreting methods, the interpretation sites, and groups (R group ; oral radiologist group, N group ; non-oral radiologist group). The obtained results were as followed : 1. The diagnostic ability of CT only and Waters' radiograph and CT was higher than Waters' radiograph only in both groups(P<0.05). But there was no difference between CT only and Waters' radiograph and CT. 2. Generally, the diagnostic ability for the lateral antral wall was the highest and that for the posterior antral wall was the lowest in both groups(P<0.05). 3. In R group, for the anterior antral wall the diagnostic ability using CT only was increased but for the medial, lateral and superior antral walls the diagnostic ability was increased in only using Waters' radiograph and CT. 4. In N group, for the anterior and medial walls the diagnostic ability using CT only was increased. But for the posterior, lateral and superior antral walls there were no difference among three interpreting methods. 5. The diagnostic ability of R group was higher than N group in all interpreting methods.
Moon, Seung Jin;Lee, Won Jai;Roh, Tai Suk;Baek, Wooyeol
대한두개안면성형외과학회지
/
제21권4호
/
pp.219-224
/
2020
Background: Repair of the orbital floor following trauma or tumor removal remains a challenge because of its complex three-dimensional shape. The purpose of the present study is to understand normal orbital floor anatomy by investigating its differences across four groups (Caucasian American and East Asian, males and females) via facial bone computed tomography (CT). Methods: A total of 48 orbits in 24 patients between 20 and 60 years of age were evaluated. Although most patients underwent CT scanning following trauma, the orbital walls were intact in all patients. Linear and angular measurements of the orbital floor were obtained from CT images. Results: Orbital floor width, length, angle between the orbital floor and medial wall, and distance from the inferior orbital rim to the lowest point of the orbital floor did not show a statistically significant difference between groups. Angles made by the infraorbital rim, the lowest point of the floor, and the anterior border of the infraorbital fissure were statistically significantly wider in East Asian females than in male groups. The floor depth in East Asian females was significantly smaller compared to all the other groups. Conclusion: East Asian female population had smaller curvature and depth of an orbital floor than the other groups, which means racial and sex-related differences should be considered in the orbital floor reconstruction.
상악 전치부 치료 시에는 다양한 구도 속에서 체계적인 진단을 통해 적절한 형태와 배열, 색조를 가지는 수복물을 제작하여 심미적으로 환자가 만족할 수 있는 결과를 이끌어내야 한다. 이를 위해 치아 구도, 치은구도, 안면구도, 치아-안면 구도의 4가지 구도 속에서 조화를 이루는 진단 및 치료계획이 필요하다. 심미적인 욕구가 강한 경우, 주관적인 환자의 심미안을 만족시키면서 기능적인 부분을 확인하기 위해, 적절한 임시 수복물을 제작하여 기능적, 심미적 측면의 평가가 필요하다. 최종 보철물 제작에 이중 스캔을 이용하여 임시 수복물의 정보를 반영할 수 있다. 본 증례는 상악 전치부가 비심미적인 환자에서, 체계적인 심미 분석 하에 임시 수복물을 제작하고 기능적, 심미적 측면을 평가 및 수정하여, 이중 스캔을 통해 임시수복물의 정보를 최종 수복물에 반영 후 최종 수복한 증례이다.
3D 프린팅은 최근 다양한 분야에서 활용 되고 있다. 다양한 활용 분야 중 사람의 얼굴을 3D 프린팅을 위해서는 먼저 3D 얼굴 데이터를 생성해야 한다. 3D 얼굴 데이터 획득을 위해 레이저 스캐너 등이 활용되고 있으나 스캔 중에 사람이 움직이면 안 되는 제약이 있다. 본 논문에서는 단일 영상 기반의 3D 얼굴 모델링 방법과 생성된 3D 얼굴을 가상 성형 등에 쓰일 수 있도록 얼굴 변형 시스템을 제안한다. 3D 얼굴 데이터 생성을 위해 3D 얼굴 데이터베이스로부터 특징점들을 정의하였다. 단일 얼굴 영상으로부터 얼굴을 특징점을 추출 한 후 3D 얼굴 데이터베이스로부터 정의된 3D 얼굴 특징점과 대응하여 입력 얼굴 영상의 3D 얼굴을 생성한다. 3D 얼굴 생성 후에 가상 성형 등의 용도를 위해 얼굴 변형 부분을 적용하였다.
Purpose: The aim of this study was to analyze three-dimensional images of the arterial supply to the temporo-mandibular joint. Materials and Methods: Ten patients (five men and five women, mean age 36 years) without signs or symptoms of temporomandibular disorders, who underwent contrast-enhanced computed tomographic (CT) scanning with intravenous contrast, were studied. The direct volume rendering technique of CT images was used, and a data set of images to visualize the vasculature of the human temporomandibular joint in three dimensions was created. After elaboration of the data through post-processing, the arterial supply of the temporomandibular joint was studied. Results: The analysis revealed the superficial temporal artery, the anterior tympanic artery, the deep temporal artery, the auricular posterior artery, the transverse facial artery, the middle meningeal artery, and the maxillary artery with their branches as the main arterial sources for the lateral and medial temporomandibular joint. Conclusion: The direct volume rendering technique was found to be successful in the assessment of the arterial supply to the temporomandibular joint. The superficial temporal artery and maxillary artery ran along the lateral and medial sides of the condylar neck, suggesting that these arteries are at increased risk during soft-tissue procedures such as an elective arthroplasty of the temporomandibular joint.
Purpose: In accordance to an increased interest in facial appearance and the popularization of computed tomography scanning, the number of diagnosis and treatment of blowout fractures has been increased. The purpose of this article is to review pure blowout fracture surgery through transconjunctival incision focusing on complications and their management. Methods: In this retrospective study, 583 patients, who had been treated for pure blowout fracture through transconjunctival incision from 2000 to 2009, were evaluated. Their hospital records were reviewed according to their sex, age, fracture site, preoperative presentations, time interval between trauma and surgery, and postoperative complications. Results: According to postoperative follow-up results, there were early complications that included wound dehiscence and infection (0.2%), hematoma (insomuch as extraocular movement is limited) (0.7%), lacriminal duct injury (0.5%), and periorbital nerve injury (0.7%). In addition, there were late complications that lasted more than 6 months, that included persistent diplopia (1.7%), extraocular movement limitation (0.9%), enophthalmos (1.0%), periorbital sensation abnormalities (1.0%), and entropion (0.5%). Conclusion: We propose the following guidelines for prevention of postoperative complications: layer by layer closure; bleeding control with the epinephrine gauzes, Tachocomb, and Tisseel; conjunctival incision 2 to 3 mm away from punctum; avoidance of excessive traction; performing surgical decompression and high dose corticosteroid therapy upon confirmation of nerve injury; atraumatic dissection and insertion of Medpor Barrier implant after securing a clear view of posterior ledge; using Medpor block stacking technique and BioSorb FX screw fixation; performing a complete resection of the anterior ethmoidal nerve during medial wall dissection; and making an incision 2 to 3 mm below the tarsal plate.
본 증례는 기존 의치를 스캔 후 프린팅한 복제 의치를 폐구인상시 개인트레이로 사용하였고 이에 기공 과정을 줄이고, 진료시간을 단축시킬 수 있었으며, 안모 평가가 용이하고 치아 배열을 비롯한 총의치 제작과정에 있어 기공 과정이 원활하게 이뤄질 수 있었다. 또한 일반적인 개구인상법을 이용한 제작과정에 비해 내원 횟수를 줄일 수 있었으며 기존 의치의 수직고경을 비롯한 여러 정보를 의치 제작 시 활용함으로써 환자의 새 의치 적응도를 높일 수 있었다.
스트레이트 와이어 장치의 효율적 운영을 위해서 제시되어야 할 여러 사항 중 치관의 굴곡도에 대한 연구는 국내, 외에서 매우 미흡하다. 이에 본 연구는 한국인 영구치의 순, 협측 임상치관 굴곡도를 조사하기 위해 시행되었다 이를 위해 정상적인 해부학적 구조를 갖고있는 구강 석고모형 36쌍을 대상으로 3차원 레이저 스캐닝 하였다. Andrews plane 과 Facial axis of clinical crown(FACC)을 각각 수평 , 수직 기준선으로 설정하고, 이들로부터 상, 하 방향과 좌, 우 방향으로 각각 1m간격으로 2개 혹은 3개씩의 선을 그었다. 이들 선이 교차하는 점들에 대한 3차원적 점 좌표를 만들어 놓고 36쌍 구강 석고모형의 각각 좌표점들의 평균을 구하였다 3차원 좌표 점(x,y,z)을 이용해 곡면 방정식을 만들어 각 치아의 곡률을 구하였고, 가로, 세로 각 방향의 2차원 곡선으로 단순화시킨 곡선에서의 곡률을 구하여 치아 부위마다의 곡률 변화를 계측하여 다음과 같은 결론을 얻었다. 1. 한국인 영구치 치관의 순, 협면 굴곡도의 기초자료를 얻었다. 2. 남, 녀 간에 치관 굴곡도 차이는 없었다. 3. 개개 치아의 치관 굴곡에 대한 특성 1) 상악 중절치에서 치은쪽과 절단면쪽의 곡률 차이가 다른 치아에 비해 심하였으며, 치은쪽이 더욱 심한 곡률을 보였다. 2) 상악 견치의 치관 굴곡도는 근심-절단면쪽의 굴곡이 다른면에 비해 더 심하였다. 3) 상악 제 1소구치에서는 근심-교합면쪽과 원심-치은쪽에서의 굴곡이 더 심하여 치관 표면의 굴곡이 대각선 방향으로 서로 뒤틀린 반면, 상악 제 2소구치에서는 근심 끝과 원심 끝의 치관 표면 굴곡이 비슷하여 서로 평행하게 나타났다. 4) 하악 중절치와 하악 측절치의 치관 굴곡도에는 유의한 차이가 없었다. 5) 하악 제 2소구치의 교합면-치은쪽으로의 굴곡이 하악 제 1소구치나 상악 제 2소구치에 비하여 더 둥근 것으로 나타났다. 이상의 결과로 볼 때, 하악 중절치와 측절치는 브라켓 베이스를 같게 해도 무방하다. 그러나 상악 제 1소구치와 제 2소구치, 그리고, 하악 제 1소구치와 제 2소구치는 치관 굴곡도에 차이가 있으므로 브라켓 제작시 베이스의 굴곡을 다르게 하여야 한다.
Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.
Objective: The purposes of this study were to evaluate the relationship between the dental and basal arch forms; to analyze their differences in the tapered, ovoid, and square arch forms in normal occlusion by using three-dimensional (3D) virtual models; and to test the hypothesis that the overjet and maxillomandibular basal arch width difference have a significantly positive correlation. Methods: Seventy-seven normal occlusion plaster casts were examined by 3D scanning. Facial axis (FA) and WALA points were digitized using the Rapidform 2006 software. The dimensions of the dental and basal arches and the overjet were measured. The samples were classified into 3 groups according to arch forms: tapered (n = 20), ovoid (n = 20), and square (n = 37). Analysis of variance (ANOVA) was used to compare the dental and basal arch dimensions. The Pearson correlation coefficients between the intercanine as well as the intermolar widths at the FA and WALA points were calculated. Results: With regard to the basal arch dimensions, the tapered arch form showed a larger mandibular intermolar depth than the ovoid. Strong correlations were noted between the basal and dental intermolar widths in both the upper and lower arches (r = 0.83 and 0.85, respectively). Moderate correlation was found between the upper and lower intercanine widths (r = 0.65 and 0.48, respectively). Conclusions: The 3 dental arch form groups differed only in some dimensions of the skeletal arch. Moderate correlations were found between the basal and dental intercanine widths. These findings suggest that the basal arch may not be a principle factor in determining the dental arch form.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.