• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.23-31
• /
• 2009

Recently, biometric techniques such as face recognition, finger-print recognition and iris recognition have been widely applied for various applications including door access control, finance security and electric passport. This paper presents the method of using finger-vein pattern for the personal identification. In general, when the finger-vein image is acquired from the camera, various conditions such as the penetrating amount of the infrared light and the camera noise make the segmentation of the vein from the background difficult. This in turn affects the system performance of personal identification. To solve this problem, we propose the novel and fast method for extracting the finger-vein region. The proposed method has two advantages compared to the previous methods. One is that we adopt a locally adaptive thresholding method for the binarization of acquired finger-vein image. Another advantage is that the simple morphological opening and closing are used to remove the segmentation noise to finally obtain the finger-vein region from the skeletonization. Experimental results showed that our proposed method could quickly and exactly extract the finger-vein region without using various kinds of time-consuming filters for preprocessing.

• Journal of The Korean Association For Science Education
• /
• v.22 no.1
• /
• pp.54-63
• /
• 2002

The purpose of this study was to investigate the effect of decision-making activities in lesson on improving decision-making ability to meet bioethical issues in everyday situation. Worksheet for decision-making was consisted of six steps: Identification of problem, searching relevant information, generation of alternatives, identification of values for selection criteria, evaluation of alternatives, review of consequence. The results of this study showed that the scores of decision-making were increased by the activities of worksheets. The scores of identification of problem, generation of alternatives, and evaluation of alternatives were increased meaningfully. However, the scores of searching relevant information, identification of values for selection criteria, and review of consequence were not increased. It seems that all steps of decision-making ability could not improve by short-term learning. Low level performance was appeared on the step of searching relevant information and evaluation of alternatives. This result indicated that students could not apply the biological knowledge to decision-making in the face of bioethical issues. In conclusion, the learning experience of decision-making is essential to foster rational decision-making ability. The activity of decision-making should be included in science class and curriculum.

• Composites Research
• /
• v.30 no.6
• /
• pp.384-392
• /
• 2017

Sandwich panels with three different joint configurations were tested to design a novel sandwich joint structure that can effectively support both the tensile and compressive loads. The sandwich core was mainly aluminum flex honeycomb but the PMI foam core was limitedly applied to the ramp area which is transition part from sandwich to solid laminate. The face of sandwich panel was made of carbon fiber composite. For configuration 1, the composite flange and the sandwich panel were cocured. For configurations 2 and 3, an aluminum flange was fastened to the solid laminate by HI-LOK pins and adhesive. The average compressive failure loads of configurations 1, 2, and 3 were 295, 226, and 291 kN, respectively, and the average tensile failure loads were 47.3 (delamination), 83.7 (bolt failure), and 291 (fixture damage) kN, respectively. Considering the compressive failure loads only, both the configurations 1 and 3 showed good performance. However, the configuration 1 showed delamination in the corner of the composite flange under tension at early stage of loading. Therefore, it was confirmed that the structure that can effectively support tension and compressive loads at the same time is the configuration 3 which used a mechanically fastened aluminum flange so that there is no risk of delamination at the corner.

• World Technopolis Review
• /
• v.8 no.2
• /
• pp.74-81
• /
• 2019

Cities will soon host two third of the population worldwide, and already today 80% of the world energy is used in the 20 largest cities. Urban areas create 80% of the greenhouse gas emission, so we should take care that urban areas are smart and sustainable as implementations have especially here the greatest impact. Smart Cities (SC) or Smart Sustainable Cities (SSC) are the actual concepts that describe methodologies how cities can handle the high density of citizens, efficiency of energy use, better quality of life indicators, high attractiveness for foreign investments, high attractiveness for people from abroad and many other critical improvements in a shifting environment. But if we talk about Entrepreneurship Ecosystem and Innovation, we do not see a lot of literature covering this topic within those SC/SSC concepts. It seems that 'Smart' implies that all is embedded, or isn't it properly covered as brick stone of SC/SSC concepts, as they are handled in another 'responsibility silo', meaning that the policy implementation of a Science and Technology Park (STP) is handled in another governing body than SC/SSC developments. If this is true, we will obviously miss a lot of synergy effects and economies of scale effects. Effects that we could have in case we stop the siloed approaches of STPs by following a more holistic concept of a Smart Sustainable City, covering also a continuous flow of innovation into the city, without necessarily always depend on large corporate SSC solutions. We try to argue that every SSC should integrate SP/STP concepts or better their features and services into their methodology. The very limited interconnectivity between these concepts within the governance models limits opportunities and performance in both systems. Redesigning the architecture of the governance models and accepting that we have to design a system-of-systems would support the possible technology flow for smart city technologies, it could support testbed functionalities and the public-private partnership approach with embedded business models. The challenge is of course in complex governance and integration, as we often face siloed approaches. But real SSC are smart as they are connecting all those unconnected siloes of stakeholders and technologies that are not yet interoperable. We should not necessarily follow anymore old greenfield approaches neither in SSCs nor in SP and STP concepts from the '80s that don't fit anymore, being replaced by holistic sustainability concepts that we have to implement in any new or revised SSC concepts. There are new demands for each SP/STP being in or close to an SC/SCC as they have a continuous demand for feeding the technology base and the application layer and should also act as testbeds. In our understanding, a big part of STP inputs and outputs are still needed, but in a revised and extended format. We know that most of the SC/STP studies claim the impact is still far from understood and often debated, therefore we must transform the concepts where SC/STPs are not own 'cities', but where they act as technology source and testbed for industry and new SSC business models, being part of the SC/STP concept and governance from the beginning.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.235-243
• /
• 2016

In the near future, many countries, including the Republic of Korea, will face a significant increase in low level radioactive waste (LLW) from nuclear power plant decommissioning. The purpose of this paper is to look at blending as a method for enhancing disposal options for low-level radioactive waste from the decommissioning of nuclear reactors. The 2007 U.S. Nuclear Regulatory Commission strategic assessment of the status of the U.S. LLW program identified the need to move to a risk-informed and performance-based regulatory approach for managing LLW. The strategic assessment identified blending waste of varying radionuclide concentrations as a potential means of enhancing options for LLW disposal. The NRC's position is that concentration averaging or blending can be performed in a way that does not diminish the overall safety of LLW disposal. The revised regulatory requirements for blending LLW are presented in the revised NRC Branch Technical Position for Concentration Averaging and Encapsulation (CA BTP 2015). The changes to the CA BTP that are the most significant for NPP operation, maintenance and decommissioning are reviewed in this paper and a potential application is identified for decommissioning waste in Korea. By far the largest volume of LLW from NPPs will come from decommissioning rather than operation. The large volumes in decommissioning present an opportunity for significant gains in disposal efficiency from blending and concentration averaging. The application of concentration averaging waste from a reactor bio-shield is also presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.108-115
• /
• 2008

The wear on engine valve and seat insert is one of the most important factors affecting engine performance. The engine valve and seat insert must be able to withstand the severe environment that is created by: high temperature exhaust gases generated while the engine is running, rapid movement of the valve spring, high pressure generated in the explosive process. In order to study such problems, a simulator has been developed to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focused on the test of various degrees of wear on four different exhaust valve materials such as HRV40, HRV40-FNV (face nitrided valve), STL #32, STL #6,. Throughout all tests performed in this study, the outer surface temperature of the seat insert was controlled at $350^{\circ}C$, the cycle number was $4.0{\times}10^6$, the test load was 6860 N, the fuel was LPG the test speed was 20 Hz (2400 RPM) and the seat insert material was HVS1-2. The mean (standard deviation) maximum roughness of the exhaust valve and seat insert was $25.44\;(3.16)\;{\mu}m$ and $27.53\;(3.60)\;{\mu}m$ at the HRV40, $21.58\;(2.38)\;{\mu}m$ and $25.94\;(3.07)\;{\mu}m$ at the HRV40-FNV, $36.73\;(8.98)\;{\mu}m$ and $61.38\;(7.84)\;{\mu}m$ at the STL #32, $73.64\;(23.80)\;{\mu}m$ and $60.80\;(13.49)\;{\mu}m$ at the STL #6, respectively. It was discovered that the maximum roughness of exhaust valve was lower as the high temperature hardness of the valve material was higher under the same test conditions such as temperature, test speed, cycle number, test load and seat insert material. The set of the HRV40-FNV exhaust valve and the HVS1-2 seat insert showed the best wear resistance.

• Journal of Sasang Constitutional Medicine
• /
• v.25 no.3
• /
• pp.158-166
• /
• 2013

Objectives Recently, Sasang Constitutional Analysis Tool (SCAT) was developed using face, body shape, questionnaire, and voice information. The purpose of this paper is to analysis the characteristics of SCAT in detail for the subjects whose Sasang Constitutional (SC) type was confirmed clearly. Methods 1) The SC types of 108 patients were diagnosed by an expert of Sasang constitutional medicine through the observation of improvements after taking more than 20 packs of herbal medicine prescribed 2) The diagnostic results of SCAT were acquired for the patients. 3) Comparison between diagnostic results of the SCAT and expert was performed according to SC probability difference, the number of packs of herbal medicine prescribed, the number of hospital visits, and age. Results 1) The concordance rate was 65.9% and 59.4% in the male and female groups, respectively. 2) Overall, the concordance rate increased as the SC probability difference increased. In case of more than 5% SC probability difference, it increased up to 71.0% and 66.7% in the male and female groups, respectively. 3) The concordance rate did not show any trend as the number of packs of herbal medicine prescribed and the number of hospital visits increased. 4) The higher concordance rate was observed in Taeeumin, Soyangin, and 20s ~ 40s groups of male patients, and in Soyangin, 20s, and 40s groups of female patients. Conclusions The strong and weak points of SCAT were observed and they will contribute to the improvement of SCAT performance.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.273-279
• /
• 2021

In this paper, we propose an algorithm that shortens the learning time by performing individual learning using partitioning the deep learning structure. The proposed algorithm consists of four processes: network classification origin setting process, feature vector extraction process, feature noise removal process, and class classification process. First, in the process of setting the network classification starting point, the division starting point of the network structure for effective feature vector extraction is set. Second, in the feature vector extraction process, feature vectors are extracted without additional learning using the weights previously learned. Third, in the feature noise removal process, the extracted feature vector is received and the output value of each class is learned to remove noise from the data. Fourth, in the class classification process, the noise-removed feature vector is input to the multi-layer perceptron structure, and the result is output and learned. To evaluate the performance of the proposed algorithm, we experimented with the Extended Yale B face database. As a result of the experiment, in the case of the time required for one-time learning, the proposed algorithm reduced 40.7% based on the existing algorithm. In addition, the number of learning up to the target recognition rate was shortened compared with the existing algorithm. Through the experimental results, it was confirmed that the one-time learning time and the total learning time were reduced and improved over the existing algorithm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.10-16
• /
• 2020

Deterioration of reinforced concrete structure caused by chloride ingress is the main issue and regrading this, many studies have been investigated with both experiments and computational modelling. In addition to chloride diffusion, chloride sorption should be considered as a chloride transport mechanism in concrete structure and cracks formed in concrete structures are the main variable to evaluate the performance of the structures. In this study, after making two types of cracks width (0.1 and 0.3 mm) in reinforced concretes, chloride absorption tests were performed. Weight change and colour change using 0.1 AgNO3 solution from the samples were performed to measure chloride ingress. Image processing was also carried out to quantify range of colour change in carck face. From the result, it were confirmed that the amount of chloride absorption increases with exposure time and increasing crack width, and chlorides reached at steel depth within 1 hour. It would be possible that chloride can move through interface bewteen steel and concrete, thereby further study regarding this is required.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.261-268
• /
• 2020

In this paper, we propose an effective software education model for youths with disability. This software education model consists of a four-step process. In the first step, it draws the education curriculum of the software education for different types of disabled youths based on the results of comparative analysis of software education field in special education curriculum. In the second step, it suggests achievement standards for effective software education for the disabled students by classifying students with intellectual disabilities and visual, hearing, and physical disabilities without any multiple disabilities. In the third step, the study developed a modular textbook comprised of unplugged activities using coding robot Albert, physical computing, and block/text coding with the reflection of the characteristic of each type of disability. In the fourth step, it applied the textbook to the school field and educated disabled students focusing on experience to allow them to think logically and by stages about different problems they face in daily lives. In addition, by analyzing the results of youths' performance evaluation and surveys, it was shown that 82.3% of developmental disabilities, 78.8% of visual impairments, 90.9% of hearing impairments, and 78.8% of physically disabilities achieved achievements above the "medium" level. These results prove that the software education model for youths with disabilities proposed in this paper is very effective in improving computational chinking of youths with disabilities.