• Composites Research
• /
• v.24 no.4
• /
• pp.17-22
• /
• 2011

In this paper, as a basic research to apply the composite sandwich to underwater vehicle, the manufacturing, analysis and test methods, and weight saving effect of a composite sandwich cylinder under external pressure were studied. A two-step manufacturing method to prevent the wrinkling of the sandwich cylinder face was proposed and the three cylinders were made and tested. Finite element results based on the shell and solid model using MSC.Nastran were compared with test results. The comparison showed that the linear finite element analysis using the shell and solid elements can predict the buckling pressure of the sandwich cylinder with approximately 3% difference. The parametric study of the filament wound cylinders revealed that the composite sandwich can reduce the weight of the cylinder more than 30% compared with the filament wound cylinder supporting the same pressure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.437-447
• /
• 2010

This study compares by gender the preference about ideal female height and body parts. Data was collected through a survey of 203 males and 236 females. The results are as follows: Males and females prefer 161~165cm as the ideal female height and 176~180cm as the ideal male height. In regards to the ideal height difference between couples, both males and females prefer males to be taller, with the head of the female at the same height as the neck of the male. Males and females prefer the shorter height than the ideal height of a fashion model and Miss Korea who got the prize from the korean beauty contest. In the case of Miss Korea, there has been a demand for tall women to participate in world beauty contests. However, this study shows that young people prefer a shorter height than the society expects. Males and females think the shoulder width is ideal when it is 2 times wider than the width of a face in regards to the preference of the ideal female body parts. There is a difference between males and females in the ideal breast size. Males prefer C-cup size while females prefer B-cup size. The ideal size of waist preferred is between 60~65cm to both males and females. The ideal shape of legs preferred to both males and females is a slightly muscular shape.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.2 s.12
• /
• pp.39-49
• /
• 2004

An increasing number of distributed applications will be achieved with mobile technology. These applications face temporary loss of network connectivity when they move. They need to discover other hosts in an ad-hoc manner, and they are likely to have scarce resources including CPU speed, memory and battery power. Software engineers building mobile applications need to use a suitable middleware that resolves these problems and offers appropriate support for developing mobile applications. In this paper, we describe the meta-server building for middleware that addresses reflective context awareness and present usability with demonstration. Metadata is consist of user configuration, device configuration, user context, device context and dynamic image metadata. When middleware send a saving or retrieval request to meta-server, it returns messages to middleware after the verification of the request. This meta-server has the application for multimedia stream services with context awareness.

• Toxicological Research
• /
• v.24 no.1
• /
• pp.59-68
• /
• 2008

N-ethyl-N-nitrosoures (ENU) is effective in inducing hypermorphic mutation as well as hypomorphic and antimorphic mutations. Therefore, this mutagen is used to the production of mutant in the mice. In order to perform an effective ENU mutagenesis using BALB/cAnN mice, determination of optimal dosage and dosage regimen of ENU is necessary. And this study tried to develop a suitable screening method and searched for novel and various mutants as model animals in phenotypedriven ENU mutagenesis. We have carried out dosage regimen for mutagenizing dose of 200 mg/kg ENU in the BALB/c mice. Total screened mice were 30,133. As the results of Esaki and Cho's Phenotype Screening, we got 2,516 phenotypic and behavior abnormalities in $G_1,\;G_2\;and\;G_3$ mice. One hundred thirty five $G_1$ phenodeviants were tested for inheritance and 16 dominant mutants were discovered. Forty two recessive mutants were also found in tested 201 micropedigrees. Early-onset mutant mice included the dysmorphology of face, eye, tail, limb, skin, and foot and abnormal behavior like circling, swimming, head tossing, stiff-walking, high cholesterol level, and tremor etc. In this study we could effectively screen $G_3$ recessive mutants. The frequent and concise early-onset screening before weaning will be available for ENU mutagenesis.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.1
• /
• pp.77-82
• /
• 1996

Environmental issues are getting imrx>rtant and the polluted environment is now c considered as one of the serious social problems which we have to face. As a result, most people hate an night soil-treating establishment to be built near their village. This paper is intended to reveal the present situation of Sanitary Environment Bureau in Iksan City and its treatment of night soil. The conclusions are as follows 1. The mean quantity of treated night soil per day was approximately 126kl In 1995, and the treated quantity per month was largest in the months from May to August, but smallest in January and February. The quantity of the largest month doubled the one of the smallest, and it is considered to be because the microorganisms are more active in the warm season than in the cold season, being a a ble to process more night soil. 2. The after-treatment sewage water is regarded as being in an optimalcondition because the examination of the water discharged from the establishment revealed the result of BOD 16.67mg/l and SS 14.78mg/l in 1995. 3. The expense for treating human waste was ￦19,582 in Iksan Sanitary Environment Bureau and it was considerably lower than the average expense through the nation, i.e. ￦22,000-25,000. But the cost should be expanded for keeping outworn equipments from the old age. 4. It is desirable for the Bureau to open the establishment so that any adult or student can come into it and watch all the treating processes. It will help the citizens understand the need for the establishment in spite of its nasty and ugly impression. Other cities or countries have to follow this model and try to provide their citizens with a cleaner environment by investing more fund technology for it.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1333-1337
• /
• 2011

3D engines loading, and expansion of the usable capacity, next-generation smartphone game markets are rising briskly by the improvement in CPU processing speed of Phones (hardware of smartphone). Therefore, in creating 3D game characters, realistic and free-form animations in a small screen of a smartphone are becoming important. Through this paper, as a method of creating characters and operating for game characters to cause user's feeling, with NURBS data of MAYA, We completed a face in turns of eyes, a nose, and a mouth, and with Polygon Cube tool, modeled hands and feet. After dividing a cube into half and modeling it, through mirror copying We completed the whole body and modeled the low-polygon. Then to model realistic and free-form characters, We completed each detail with ZBrush and applied Divide level up to 4. Though they might look rough and exaggerated, We tried to express stuck-out parts and fallen-in parts effectively and smoothly with Smooth brush effect, map and design the low-polygon 3D characters.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.28-35
• /
• 2017

Recently, conventional hydraulic car lift systems face the technological limitations due to a lack of height control. The demand for height controllability is required in many tasks such as wheel alignment, and requires compensation for the structural deformation of the lift caused by irregular load distribution. In order to resolve this limitation of the conventional car lift, in this work, a new type of a hydraulic vehicle lift using a magneto-rheological (MR) valve system is proposed and analyzed. Firstly, the dynamic model of vehicle lift is formulated to evaluate control performance; subsequently, an MR valve is designed to obtain the desired pressure drop required in the car lift. Next, a proportional-integral-derivative (PID) controller is formulated to achieve accurate control of the lifting height and then computer simulations are undertaken to show accurate height control performances of the proposed new car lift system.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.4
• /
• pp.359-370
• /
• 2015

This paper presents the experimental results for the interfacial bond behaviour between AFRP strip and steel members. The objective of this paper is to examine the interfacial behavior and to evaluate the interfacial bond stress between Aramid FRP strips and steel plates. The test variables were bond length and AFRP thickness. 18 specimens were fabricated and one-face shear type bond tests were conducted in this study. There were two types of failure mode which were debonding and delamination between AFRP strip and steel plates. From the test, the load was increased with the increasing of bond length and AFRP thickness, which was observed that maximum increase of 63 and 86% were also achieved in load with the increasing of bond length and AFRP thickness, respectively. Finally, bond and slip characteristics had the elastic bond-slip model and it was observed that bond strength and fracture energy were not affected by bond length and AFRP thickness.