• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.71-80
• /
• 2003

The purpose of this study is to analyze the window area ratio distribution of building facade in Tokyo metropolitan area. The survey was carried out in Marunouchi, Kanda, Kasai and Todoriki district. The results of this study were as follows; to propose of window area ratio production method, analyzed and surveyed window area ratio of each district building-used and to compared every wall window area ratio of building. Every wall window area ratio of office district is $20\sim40%$, ones of non-office district is 15% or 35%. Residential area results are every wall window area ratio of apartment is 35%, ones of a house is 15%. To increase of office building to appear that Kanda, Kasai added window area ratio. But, Marunouchi, Todoriki wad not this tendency. Above mentioned results are made out database.

• Journal of Power System Engineering
• /
• v.20 no.6
• /
• pp.99-104
• /
• 2016

In this study, we researched the energy load according to the change of the inner window area ratio, the distance of the air gap and the azimuth of the curtain wall building, which installed the multistory double-skin facade(DSF). and we compared the results with the no double-skin facade situation as follows. With the DSF, it is better than other case, when the window area ratio is 40% and the air gap is 1.2m on the west, south-45-west, south-45-east and east. And it's best when the window area ratio is 40% and the air gap is 0.4m on the south. And on the east or south-45-east, the window area ratio is 40% and the air gap is 1.2m is better than other case with the DSF. On south, it is best when the window area ratio is 100% without DSF. On the south-45-west or west, it is best when the window area ratio is 40% without the DSF.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.83-89
• /
• 2013

Energy consumption is closely related to our lives. As Korea has four seasons, heating and cooling system is considered as essential facilities for the residential buildings. Accordingly, the government has continuously strengthened the design criteria to improve energy for new and existing building to save energy. The most important factor in the energy efficiency analysis for apartment is the heat transmission coefficient, and the value is significantly different as the heating energy amount is greatly different according to the window area ratio versus facade area ratio. Therefore, it is time to conduct continuous set-up for goal to enhance efficiency and restriction on window area ratio versus facade area ratio.

• KIEAE Journal
• /
• v.7 no.6
• /
• pp.29-36
• /
• 2007

Recently, rapid development of technique and change of lifestyle during nighttime has activated the urban outdoor lighting and renovated consideration of nightscape. As the interest of nightscape increases more widely, outdoor lighting has been installed more and more in the cities. Nightscape comes in diverse forms. So, there is no absolute standard for outdoor lighting. But only bright outdoor lighting is not necessarily a good nightscape. Installation lighting without master plan or excessive outdoor lighting may cause a inharmony. This study aims to analyze the luminous characteristics of facade in shopping complexes. For the purpose, four large-scale shopping complexes located in Dongdaemun area were selected. Building facade composition, outdoor lighting composition, and lighting equipment of each shopping complexes are surveyed, and luminance of building facade were measured with Prometric 1400. The result of the study are as follows; (1) Horizontally large-scale shopping complexes emphasize the building entrance and shape of the building at night by outdoor lighting. (2) Non cut-off luminaries installed in building entrance and shop front caused the potential of light pollution.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.157-166
• /
• 2008

Until 1960, the major housing type of rural area in Korea was traditional wooden frame building, which was made of natural materials. In the course of modernization and New Village Movement, most of traditional houses have been renovated focusing on changing roof material of rice straw into slate, keeping existing main wooden structure. And then from around 1980, by economical development the new houses have been constructed. On these three phases of traditional type, remodeling type and new construction type, the natural materials of housing facade as wood, soil, stone and plant changed into artificial materials as cement, chemical material and paint. At the same time the exterior color of housing also have been changed and varied. The purpose of this thesis is to find out the changing aspect of exterior color by comparing remodeled and new constructed housing with of traditional housing. The exterior color of one hundred and fifty seven houses were surveyed and the three color attributes of each part of facade, as roof, wall and window, were analyzed and compared. In case of traditional houses, 98.3% of color are concentrated on the warm color of Y and YR on HUE scale, and 88% of their color are low Chroma. And Value of their color has been varied and spreaded from low to high Value scale. From traditional types to remodeled and new constructed houses, the concentration ratio of warm color on Hue scale reduced from 98.3% to 68.7% and ratio of low Chroma was also changed from 88% to 73.2% and the ratio of low Value color reduced from 51.9% to 29.7%. The exterior color of houses in rural area varied on Hue, and the more saturated colors were used and they became brighter compared with color of traditional houses. It is expected that the results of this study can be used for basic data of exterior color planning and improvement into harmonized color with natural environment.

• Wind and Structures
• /
• v.36 no.1
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.88-100
• /
• 2014

The purpose of the study is to analyze the regional effectiveness of wall-plantings by applying a biotope area ratio when wall-plantings are constructed in high density areas. For this, this study required a sample of the wall-planting's regional plan. Therefore, types of wall-planting were determined and applied to a sample site. Four types of wall-plantings were developed by formative features and functional features. Type "A" had simple and functional features, Type "B" had both mixed and functional features, Type "C" had both simple and landscape features and Type "D" had mixed and landscape features. Jung-gu District in Seoul was chosen as the sample site. Total investigations were performed three times for three months from June to August, 2011. Total green-able walls were located in 498 places with a total length of 8,449m and gross vertical area of $23,754.90m^2$. The classification results of total green-able walls by the four types were Type "A" at $1,936.65m^2$, Type "B" at $5,875.30m^2$, Type "C" at $12,487.85m^2$ and Type "D" at $3,455.10m^2$. This study analyzed how all facade areas of the green-able walls impacted the biotope area ratio at the site. First, the biotope area ratio regarding all the zones in Jung-gu District was defined as the gross biotope area ratio while the biotope area ratio regarding all of the artificial zones was defined as the net biotope area ratio. In the case of the gross biotope area ratio, 17.97% is current ration with a projected increase to 0.10% after wall-planting. In the case of the net biotope area ratio, 4.73% is the current ration with a projected increase to 0.11% after wall-planting. This 0.11% is about 2.28% of 4.73%. This study looks at all wall-plantings that have been constructed throughout a high density area to observe their impact on the improvement of ecological function therein. With consideration of the landscape value of the facade, the regional effectiveness of wall-planting is expected to increase even more.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.43-48
• /
• 2008

This study is about offering quantitatively analytic frame of streetscape, and also about making a way to be standardized and adapt changing landscape. This allows us to manage a form of elevation map after the application to GIS. The form of elevation map is a visible and vertical arrangement method of data recognizable while walking or driving. Applying measurable traits enables us to make a quantitative control over each element of which streetscape consists. After all, it would play a great roll in organizing and maintaining fine streetscape of each city. As the basic ways to make the elevation map, this study proposes the methods of providing quantitative analytic frame of streetscape after applying elevation data, Raster Data and Vector Data, which were investigated on the basis of GIS. In addition, as a simulation for increasing reality, certain streets, where the streetscape is very important, were chosen so that they enable us to utilize quantitatively analytic data of streetscape with analyzing the +degree of opening ratio in the boundary of D/H=2, comparing between wall area and windowpane area, comparing between facade area and sign board area, and calculating both area and ratio which are applied to ecospace.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.

• International Journal of High-Rise Buildings
• /
• v.10 no.3
• /
• pp.193-201
• /
• 2021

Cheongna City Tower is a 448-meter-high rise observatory tower with 8.7:1 aspect ratio located at central lake park in Incheon Cheongna international city. The tower is a crystal shaped image and it turns invisible when the façade is activated. The tower was planned to be hexagonal 30-story building with two basements which are composed of mega frame structure using mega column and mega brace. In order to minimize the wind effect, the blow-through area was installed so that the wind can pass through. This observatory tower is an unprecedented project since the whole building is covered by façade for invisibility effect.