• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.920-928
• /
• 2006

Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.95-106
• /
• 2005

The purpose of this study was to research the design methods to express jacquard design using CAD. For this study, two design patterns were divided; in addition, each design pattern is applied to two different weaving types, single woven fabric and double well cloths. As a result, 16 samples were produced by applying 4 design methods (warp shrunk as half size design/weft shrunk as half size design - A, warp shrunk as half size design/weft original size design - B, warp original size design/weft shrunk as half size design - C, warp original size design/weft original size design - D) to the two design patterns with the two weaving types. The result of this study can be summarized as follows. 1. The most delicate design method was Method D. However, Method B which took half the time less than Method D was almost as delicate as the Method D on the surface. 2. Method B was judged as a considerably efficient method for time and cost. 3. Method D was considered as most suitable for elaborate parts and delicate lines. However, it was considered uneconomical since it took the longest time. 4. Mettled A took 2.5 times less time than Method D. Therefore, Method A was more applicable to producing high density design. 5. Method C is not considered as a useful method as it showed rough surface and took long time by applying high design zoom except intentional design.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• Nuclear Engineering and Technology
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1980

The grafting studies were concentrated on working out the methodology for radiation of flame retardants to polyester/cotton (65/35) blend fabric. The Fyrol 76 was used as a flame retardant in develping methodology for localizing flame retardants on the surface of the blend fabric. By judicious control of the swelling conditions, time_of contact with the monomer, and dose rate, locating the graft in the fiber became possible. The yield of the graft polymerization was depended upon the total dose and the preswelling conditions. Oxygen Index was used to evaluate the effect of the location of Fyrol 76 and other flame retardants within the surface upon the flame retardance efficiencies. To get a better flame retardance efficiency by :the localized grafting of Fyrol 76 to polyester/cotton blend fabric, a technique of one step processing at room temperature was developed substituting the ordinary two-step processing at high temperature.

• Composites Research
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2017

Eco-convivial composites with improved properties are essential to present polymer scenario and can be made easily by replacing partially/completely renewable materials either matrix or reinforcement along with few % of additives. In these investigations, Abaca fabric have been used as reinforcement for manufacturing of Vinyl ester composites through VARTM technique and study the effect of alkali surface treatment of abaca fabric and flame retardant additives i.e., ammonium polyphosphate (APP) with halloysite nano-clay (HNT) on mechanical and flame retardant properties. The results concluded that, surface treatment deceased the hydrophilic nature of fabric and enhanced the interfacial bonding with hydrophobic matrix and eventually increased mechanical properties slightly of developed composites. Similarly, the flame retardancy of the composites improved significantly and increases the burning time by varying the wt% of filler concentration.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.238-239
• /
• 2017

Waterproofing is a very important process in terms of durability of buildings. The materials used for waterproofing work to protect the concrete structure from external deterioration factors. In particular, the waterproofing materials applied to the exterior of the concrete structure have various problems due to changes in the external environment and variables in the construction process. The waterproof layer is repeatedly dried and shrunk according to changes in the external moisture environment, and the surface may be deteriorated due to exposure to long-term sunlight. In the case of the roof waterproofing in the structure, the waterproof layer which does not have a sufficient curing period shows much swelling and floating phenomenon. These defects, such as swelling and lifting, account for most of the defects that occur in the waterproof layer of the concrete slabs. Generally, it is difficult to expect the same level of performance as the initial state even if the waterproofing work is repaired when a defect occurs. Therefore, it is possible to reduce the defects of the waterproof layer such as swelling and lifting by forming a waterproof layer which can be integrated with the concrete surface by using a polyurethane type waterproofing material having a relatively low defective ratio compared to other waterproofing materials. So in this study, the basic properties of polyurethane waterproof sheet reinforced with non-woven fabric are investigated in order to understand field applicability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.12
• /
• pp.1247-1256
• /
• 2012

The paper details the development of a Korean style loungewear based on traditional Korean hanbok clothing. For this, we surveyed and collected data from 3,500 adults over 20 years of age. The questions were on their preferences of hanbok for both traditional and contemporary styles as well as loungewear. The survey showed that preferences for hanbok were high for both traditional and contemporary styles. The survey also suggests how a successful mass-produced Korean style loungewear should be designed to increase its popularity. It should feature comfortably simplified silhouettes, a selection of contemporary colors from Korean symbolic colors, modernized Korean textile surface designs, and easy-to-maintain healthy fabric. Based on these results, the development direction of Korean style loungewear was set and various loungewear samples were produced. Another group of survey participants were asked to try on samples and their preferences were surveyed. At the conclusion, a version that was most preferred among the participants was obtained. We suggest one-piece style and two-piece style designs with silhouettes based on the characteristics of traditional Korean costumes. The preferred fabric for loungewear was natural and soft cotton. We suggest the necessity and effectiveness of loungewear made with environment-friendly hanji-fabric. The main colors for loungewear were selected based on survey: blue, red, white, and saekdong (color stripes). We made color combinations with the main colors then applied the textile surface designs. The traditional Korean patterns of Hangeul (Korean letters), taegeuk (yin-yang), geometric figures, and samjogo (three-legged crow) were also chosen, and then loungewear using the textile designs was developed. The results have been shown on the "Han Style Fashion Show" by Jeonju City and exhibited in the "Seoul Living Design Fair" and the "International Art & Craft Trend Fair" in COEX, Seoul.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.464-472
• /
• 2002

The aim of this study was to elucidate dyeability and antimicrobial activity of cotton fabrics dyed with Sophora Radix extracts according to various mordants. Dyes were extracted from Sophora Radix using ethanol. Then, cotton fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60% (owf, the mordant was 3% (owf), L.R was 1:20, the temperature was 60~7$0^{\circ}C$, the time of dyeing was 60min., and the time of mordanting was 60min.. The dyeability was evaluated by surface color and color fastness. The skin microorganism was evaluated on S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E. coli, A. niger, C. albicans and T. mentagrophytes. The results are as follows; 1. When mordants were treated, surface color was 3.3Y to 0.1 GY in H (hue) value which indicated greenish yellow to yellow 2. The color fastness to perspiration, dry-cleaning, rubbing, and washing stain fabric showed 4~5 degree. The color fastness to light was improved to 4 degree by treatment of mordants. The color fastness to washing was 2 degree which was somewhat poor. 3. Cotton dyed with ethanol extracts was excellent on S. aureus, B. subtilis, S. epidermidis and p. antis. But that showed poor antibacterial activities on P. aeruginosa and E. coli such as gram negative baterials 4. Antibacterial activity of cotton fabrics dyed didn't be improved by treatment of mordant 5. Antifungal activity of cotton dyed with ethanol extracts was excellent on T. mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 hours in cotton dyed mordanting with SnCl$_2$.$_2$$H_2O$.

• The International Journal of Costume Culture
• /
• v.8 no.1
• /
• pp.23-31
• /
• 2005

Mechanical properties and hand evaluation of wool/acrylic(W/A) blend knits were conducted before and after repeated washing to get the optimum W/A blending ratio, which could help achieve the optimum mechanical and hand properties of the knits. The five test fabrics using the yarns with different W/A blending ratios($\%$), 100/0, 70/30, 50/50, 30/70, 0/100, were knitted. The fabrics were washed by a rotating drum type washing machine. Then, objective mechanical and hand properties were evaluated by KES-FB, Kawabata evalution system for fabric. The results are as follows: there was no change in the hand value of the knitted fabric with the W/A-blended yarn caused by the change in the blending ratio before washing. After washing, however, the increase of acrylic's blending rate caused the bending property to decrease proportionally, while the friction coefficient of the surface property increased. Furthermore, the study showed that W/A 50/50 possesses the most superior tensile property and shearing property, which could attain the optimum blending ratio. Similar results in hand value were derived in all the samples. After washing, however, the increase in acrylic's blending rate caused a proportional decrease in KOSHI and an increase in FUKURAMI. In addition, W/A 50/50 gained the biggest NUMERI value, again corresponding to the optimum blending ratio. Similar results in total hand value were derived in all the samples before washing. After washing, though, all the total hand values decreased, and, as the wool fabric's blending rate increased, the total hand values proportionally decreased further.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.101-110
• /
• 2007

Since cotton fabrics with ripple finish treatment form wavy furrows on the surface or bumpy patterns, air circulation during wearing is good and the fabric is cool to the touch. The finishing principle is based on the mercerization, which utilizes the fact that cotton fibers contract in a concentrated NaOH solution. In this study, as fabric specimens, cotton fabrics with yarn counts of 40's, 60's and 80's were used. Concentrations of the NaOH solutions were 15%, 25%, and 35%. After dyeing fabrics using Rubia akane nakai, color and other properties were measured. As the concentration of the NaOH solution increased, the fabric became thicker and denser, and the number of occurrence of the prominence and depression per unit length became larger. The color of the region contracted by ripple finish became darker after dyeing, while the color of the untreated region became lighter, which enhanced the cubic effect of the ripple finish. As the count of the cotton yarn increased, the dyeability became better. As the concentration of the NaOH solution increased, the air permeability became lower.