• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2005

Recently, natural fibers draw much interests in composite industry due to low cost, light weight, and environment-friendly characteristics compared with glass fibers. In this study, mechanical properties were evaluated for two extreme cases of jute fiber orientations, i.e. the unidirectional yarn composites and the felt fabric composites. Samples of jute fiber composites were fabricated by RTM process using epoxy resin, and tensile, compression, and shear tests were conducted. As can be expected, unidirectional fiber specimens in longitudinal direction showed the highest strength and modulus. Compared with glass/epoxy composites of the similar fabric architecture and fiber volume fraction, the tensile strength and modulus of jute felt/epoxy composites reached only 40% and 50% levels. However, the specific tensile strength and modulus increased to 80% and 90% of the glass/epoxy composites. The main reason for the poor mechanical properties of jute composites is associated with the weak interfacial bonding between fiber and matrix. The effect of surface treatment of jute fibers on the interfacial bonding will be examined in the future work.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.213-231
• /
• 2014

An elastoplastic model for structured clays, which is formulated based on the fact that the difference in mechanical behavior of structured and reconstituted clays is caused by the change of fabric in the post-yield deformation range, is present in this paper. This model is developed from an elastoplastic model for overconsolidated reconstituted clays, by considering that the variation in the yield surface of structured clays is similar to that of overconsolidated reconstituted clays. However, in order to describe the mechanical behavior of structured clays with precision, the model takes the bonding and parabolic strength envelope into consideration. Compared with the Cam-clay model, only two new parameters are required in the model for structured clays, which can be determined from isotropic compression and triaxial shear tests at different confining pressures. The comparison of model predictions and results of drained and undrained triaxial shear tests on four different marine clays shows that the model can capture reasonable well the strength and deformation characteristics of structured clays, including negative and positive dilatancy, strain-hardening and softening during shearing.

• 한국환경과학회지
• /
• 제15권10호
• /
• pp.945-949
• /
• 2006

For a membrane bio-reactor, it is possible to fillet and separate activated sludge and effluent by head loss of centimeters, if non-woven fabric material is used as titration media. However, if non-woven fabric material is used to thicken high-concentration sludge, excessive sludge attachment causes the rapid decrease of flux. Mesh with fore sizes of $100{\mu}m,\;150{\mu}m,\;and\;200{\mu}m$ allows for easy separation of attached sludge. This study examined the possibility of mesh as filtration media. Existing close-flow filtration process, which requires maintaining sludge movement, makes It difficult to obtain high thickening rate. With a view of complementing this weakness, this study has made an experimental examination on how high-concentration sludge (about 3,000mg/L to 10,000mg/L) will be filtered and thickened when mesh module is submersed in the bio-reactor. Effluent flowed from the bottom of the bio-reactor by head loss of 65cm. In case of pore size of $100{\mu}m$, SS showed high recovery of 80% to 96%; therefore, it has been decided that mesh can be used as filtration media. Filtration lasted for more than 9 hours, until sludge with 9,000mg/L in MLSS concentration was thickened 9 times as dense. In the range from 3,610mg/L to 9,060mg/L in MLSS concentration, it was possible to obtain effluent with less than 2mg/L in MLSS concentration within 10 minutes.

• 한국실내디자인학회논문집
• /
• 제14권1호
• /
• pp.142-150
• /
• 2005

This study is arranged the principles of the preservation and restoration in pre-modern architecture, presented guideline of the Intoner restoration in there, and attempted relative-analysis by cases of Japan in curtain of Saporo Houheikan. The method of Original- restorations and Repairs must be preserved In materials and technologies in order to hand over the future generations. The process and method of restorations are the important Cultural Properties as Architecture's itself. And Restorations of industrial manufactures hold the the important position in restoration of pre-modern Architectures. Because industrial technologies are developed and forgotten in rapid. Specially, because industrial materials as curtains were apt to recognize as consumption goods, historicity in that are contained the history of fabric, industrial technologies, and relations of traditional technologies. Conclusionaly, restorations of interior materials in our country are required of \circled1the construction of workframe in search and restoration for original preservation, \circled2the conception of refaires and establishment of investigation, \circled3the stocking of restoration-technologies of pre-modern cultural properties of architectures, \circled4the recognitions of record-preservation, \circled5the improvement of organization, upbring of technicians, establishment of theorical systems.

• Architectural research
• /
• 제15권3호
• /
• pp.133-141
• /
• 2013

The purpose of this paper is to highlight the main policies of the last half century that have shaped the urban architectural fabric of Seoul today, and explore whether a modified approach might better address the current socioeconomic conditions in Korea. The paper defines and examines urban planning in Korea through an overview of the four main urban project policies implemented in Seoul from the 1960s to the present: Land Readjustment (LR), Housing Site Development (HSD), Urban Redevelopment (UR), and Housing Reconstruction (HR). While the fundamental ideology behind these policies served well during a prolonged period of high economic growth, evidence is growing that these policies are losing steam under today's conditions. A growing legacy of stalled and incomplete urban projects from the mid-2000s-the New Town Project is an example-begs the fundamental question as to whether an alternative urban planning paradigm is needed for Korea in an age of low economic growth, low birth rates and a fossil fuel energy crisis. Through the urban morphologies of the three residential areas in Seoul developed by LR projects, this paper looks at the possibility of urban regeneration through the sustainment of urban architecture in those residential areas that have not been affected by HSD, UR, and HR.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.131-139
• /
• 2001

This paper aims at surveying through case studies the planting possibility on the interval artificial ground between the bank and the core landfill of the first section of works in the SUDOKWON Landfill area landfill area which was completed, followed by the layer-on-layer landfill process involving the latch or sealing layer against emitting landfill gas from the reclaimed waste. The survey results are as follows; 1. The layers of the artificial planting ground on the landfill were established on the basis of top-on-top procedure for a waste layer, a topping soil layer (T=50cm), a gas blocking layer (broken stones T=30cm), a filter layer (non-woven fabric 700g), a sheet protecting soil layer (T=20cm), and a blocking layer (HDPE SHEET 2.0mm), an irrigation layer (SAND T=30cm), a filter layer (non-woven fabric 700g), a sheet protecting soil layer (T=20cm), and a blocking layer (HDPE SHEET 2.0mm), an irrigation layer (SAND T=30cm), a filter layer (non-woven fabric 700g), a planting layer (T=90cm+), a top mound (T=2m). 2. Since no direct damage on the planting layer affected by the landfill gas was detected, planting is found to be still possible and successful except the severely unequal subsidence portion. 3. The mortality rate is discovered different on different trees: Pinus thunbergii (H3.0$\times$W1.0m) 11.25%, Pinus thunbergii (H2.5$\times$W0.8m) 4.73%, Koelreuteira paniculata 8.67%, Hibiscus syriacus 5.68%, Deutzia parviflora 6.50%, Forsythia koreana 8.17%, Rho. yedoense v. poukhanese 32.22%, and Spiraea pru v. symplicifolia 18.89%; although the last two of which are generally considered to have a strong generic growing character, they are subject to be weakened when exposed to the contaminated microclimate of the site like landfill gas. 4. The damage rates, on Pinus thunbergii, Koelreuteria paniculata, Hibiscus syracus, Forsythia koreana, Deutzia parviflora, Rho. yedoense v. poukhanense were shown to decrease to 7.31-17.69% in the second check (June 2000) lower than 5.77-46.92% in the first examination (June 1999), whereas the damage on Spiraea pru v. symplicifolia relatively increased. It is believed that preparatory method of the air pollution, change of temperature, odor by emitting landfill gas, and minute dust from vehicles should be made, and a research on this matter will be conducted in the near future.

• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.31-42
• /
• 2009

Though Adolf Loos, an architect of 1920s said 'ornament is sin', feature of decoration has big gravity in modern architecture & its design trend. Embellishment as a new genre that combined new cultures, trends, and technologies is finally ascribing to skin design approach. For instance it is preference to rags, coarse fabric, external shape of fragments. Expressing surface as a ceremony in architecture or indoor design is also belong to the same category. In this respect, as a new approach on skin, the study focuses on visual and spatial changes that stimulate user's sensibilities consequently since skin design is based on human senses and sensibilities. As skin design expands the scope of human experiences comprehensively, and classify boundaries between internal parts and external parts or make them ambiguous, aesthetic embodiment on new trends is getting done. Through skins on buildings, a message is transmitted to a whole city, an opportunity for the city to be expanded into a new space is created, and human senses are stimulated through refusing a traditional sides by rediscovering decorations in space design and adapting the sides made in limitlessly-expressed styles. Thus, as a new approach on the skins that transmit a message through human senses, the study is to contemplate skin design, and to interpret them as works to eliminate boundaries among architecture, fashion, interior/exterior space design(especially exhibition and international fair)following their suits. Through interpreting this subject, the study is to understand and analyze comtemporary expansion situation on interactions among fashion and architecture, and interior design.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.209-218
• /
• 2012

최근 무어의 법칙을 연장시킬 시스템 집적 기술로서 Field Programmable Stateful Logic Array (FPSLA)가 제안되었다. 본 논문은 FPSLA의 설계 자동화 절차를 확립하고 논리 합성, 동기화, 물리적 매핑, 자동 배치 등의 접근 방법을 최초로 제시한다. 특히, 동기화를 통해 배치를 1차원 문제로 축소한 후 비선형 최적화 기법을 개량한 개략 배치 모델 및 하향식 계층적 2분법을 이용한 배치 적법화 알고리즘을 제안하였다. 또한, 제안된 모델 및 알고리즘을 소프트웨어로 구현하여 ACM/SIGDA 벤치 마크 예제에 적용함으로써 그 유효성을 입증하였다. 이 소프트웨어에는 Fanout 수만큼 출력 상태를 같은 단의 멤리스터성 스위치에 복사해야 하는 FPSLA의 특성을 고려하여 최적화 단계 별로 넷을 하이퍼에지로 통합했다가 다시 에지로 분리하는 기법이 제안되었으며 약 18.4%의 추가적 최적화를 이룩했다. FPSLA의 출력 상태 복사는 논리 단 일부에 셀 밀도가 집중되는 문제를 노출했으며 단위 논리 게이트의 Fanin을 제한하는 기법으로 18.5% 감소 효과를 얻었다. FPSLA의 실용성 확보를 위해서는 우선 논리 합성 시 Fanin의 수가 일부 단에 집중되지 않도록 제약하는 방안을 개발하여야 한다. 또한, FPSLA 패브릭 구조를 이식하기 위해 대칭성이 감소된 나노와이어 크로스바가 형성하는 복잡한 그래프 상에서 수행되어야 하는 자동 배선의 효율성 연구도 필요하다. 이러한 툴 개발은 설계 자동화 자체뿐만 아니라 FPSLA의 패브릭 구조 개선에 필요한 실험에 유용한 평가 도구로서도 큰 역할을 할 것이다.

• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.72-79
• /
• 2010

This research was initiated to investigate the revegetation characteristics under seedling types of native woody plants on a disturbed slope. 4 different seedling types of woody plants (control, unit seedling plot, nature seedling plot, pot seedling plot) with the same woody plants (Rhus chinensis Mill, Albizzia julibrissin Duraz., Quercus acutissima Carr., Pinus densiflora S. et Z.) were treated with 3 replications on the experimental disturbed slope. Data such as the died number of native woody plants, growth height and visual quality were analyzed. The died number of plants were high in unit seedling plot when compared to the rest plots of seedling types. From the standpoint of died plant species, the died number were high in Rhus chinensis and Albizzia julibrissin whereas the died number were low in Quercus acutissima and Pinus densiflora. That's because we used 1-year old seedlings of Rhus chinensis and Albizzia julibrissin and 3-year old seedling Quercus acutissima and Pinus densiflora. This result indicated that the died reason of native woody seedling was not species but seedling age. Both growth height and visual quality were ranked first in the pot seedling plot, second in the nature seedling plot, third in the unit seedling plot, and last in the control plot, respectively. However, the difference of both growth height and visual quality in each seedling plot was not observed on the 11 months after planting. Especially, the main reason of low rooting and growth value in the unit seedling plot was due to wooven fabric outer crust of pot that obstruct seedling rooting into the soil. We concluded that pot seedling of native woody plants was effective in the viewpoint of the ecological disturbed slope revegetation.

• 건축역사연구
• /
• 제2권2호
• /
• pp.37-49
• /
• 1993

The Purpose of this study is to look for the total conspectus of Roo-Jong(RJ) Architecture in the middle and latter era of Koryo Dynasty. The method of this study is the review of old literature, the Roo-Jung description of Dong-Mun-Sun, which had compiled in the Ninth year of Seung-Jong (AD 1478) by confucian scholar. The conclusions of this study can be summarized as follows : 1) The main currents of thought having a great influence on the RJ are thought of Mountain God (or Sin Sun, which is dwelling in mountain) or Taoist, thought of Lao-tzu and Chuang-tzu. They had required the RJ Architecture to pursuit the life of God. In this existence value meaning, the RJ Architecturethe is the semi-sacred & profane space. In the being aspect, RJ is the transcendental architecture. 2) The way of life of in the RJ had strongly turned from the personal space, mainly mind control place, into the friendship-society space, pastime place. 3) The RJ had located after the images that is what should be. The images were formed on the ground of natural landscape elements, communication elements. And these elements were indicated on one's visual, auditorial sensation with oneself. 4) In planning aspect, the scope of visual, Pungsu and history were aided with the factors of climate, topography and geography. Specially in location and fabric planning, they had regarded more important the objects and scope of visual than the climate factor.