• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1712-1719
• /
• 2003

This paper concerns on application of active magnetic bearing(AMB) system to levitate the elevation axis of an electro-optical sight mounted on moving vehicles. In such a system, it is desirable to retain the elevation axis within the predetermined air-gap while the vehicle is moving. An optimal base acceleration feedforward control is proposed to reduce the base motion response. In the consideration of the uncertainty of the system model, a filtered-x least-mean-square(FXLMS) algorithm is used to estimate the frequency response function of the feedforward control which cancels base motions. The frequency response function is fitted to an optimal feedforward control. Experimental results demonstrate that the proposed control reduces the air-gap deviation to 27.7% that by feedback control alone.

• 전자공학회논문지T
• /
• 제35T권2호
• /
• pp.48-55
• /
• 1998

광대역 소음의 능동소음제어(Active Noise Control, ANC)에 사용되는 Filtered-X Least Mean Aquares(FXLMS) 알고리즘의 주 결점은 제어 알고리즘의 입력으로 사용되는 필터링된 기준신호가 상관되어 입력신호의 자기상관행렬이 큰 고유치비를 갖게 됨으로써 수렴속도가 느려지는 것이다. 이 상관은 그 원인이 기준센서 신호의 자기상관 때문이거나, 기준신호가 오차경로로 필터링되어서 나타난다. Recursive Least Squares(RLS)와 같은 빠른 수렴속도를 갖는 적응 알고리즘이 존재하지만, 이들 알고리즘은 실 계의 구현을 위해 많은 계산을 필요로 하거나, 각 샘플마다 제어기의 최적화가 필요한데, 이는 매우 심각한 제한조건이다. 본 논문에서는 빠른 수렴의 속도를 갖으면서 FXLMS와 근사한 연산량을 갖는 제어알고리즘을 제안한다. 이 알고리즘은 수렴속도를 느리게 하는 상관성을 줄이기 위해 이산 Walsh 변환을 사용하는 변환영역 FXLMS이다. 제안한 알고리즘을 광대역 능동소음제어 시스템에 적용, 모의시험한 결과 FXLMS의 문제점인 고유치비가 약 1/40으로 줄어드는 성능 개선 효과를 확인할 수 있었다.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.27-31
• /
• 2012

본 논문에서는 FXLMS(Filtered-X LMS) 알고리즘을 이용하여 지향성을 가진 배열의 스피커 시스템을 구축하고 그 방사특성을 확인하였다. 배면 위치한 스피커에서 제어대상 신호의 $180^{\circ}$ 특성에 대하여 최적화 된 필터계수에 의해 제어신호를 발생시켜 제어스피커 $0^{\circ}$ 방향 특성을 간섭시켜 제어스피커 정면 $0^{\circ}$ 특성의 억제를 하도록 하였다. 이 시스템을 이용하여 장착된 배면 스피커 배열의 방사특성을 측정하였으며 제어대상 스피커의 신호가 감쇄효과를 나타나는 것을 확인하였다. 감쇄시 적응필터계수를 이용하여 배면위치 스피커의 주파수특성과 방사특성을 구한 결과, 제어점에 있어서의 감쇄는 모든 주파수 영역에서 확인되었다. 100Hz, 200Hz, 1000Hz에서의 주파수대역에서는 정면에서 $60^{\circ}{\sim}100^{\circ}$의 범위에서 감쇄효과가 나타났다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.179-185
• /
• 2012

Since the eco-era is getting closer, the importance of noise reducing in the passenger cars of high-speed train is very important. The active noise control is best choice to reduce low frequency noise because the passive one is too heavy for high speed trains where weight is so critical. Also ANC is able to reduce the ambient noise when the environmental-factor changes. To reduce a three-dimensional closed-space sound field like a car of a high-speed rail is hard to do using single channel ANC control system. We used multi-channel FXLMS algorithm which calculation speed is fast and the secondary path estimation is possible in order to take into account the physical delay in electro acoustic hardware control loudspeaker and power amplifier. Firstly, we have measured interior noise of KTX and estimated noise path in KTX test-bed. However there was some problem related to algorithm divergence and increasing the filter order. We have made a simulation of interior environment of KTX car by using three frequency bands of 120Hz, 280Hz, 360Hz as the most important for KTX ANC system. During this research the interior noise reduction of KTX car was made by using the multi-channel FXLMS algorithm. Reduction performance was evaluated and compared each other for open space section and tunnel section. in-situ experiment for the KTX noise reduction by proposed ANC was performed based on data obtained in simulation and they were compared for open space section and tunnel section as well.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.51-57
• /
• 2009

In this paper, we studied on an attenuation effect of automobile exhaust noise according to the direction of canceling speaker in duct-acoustic ANC system. Automobile exhaust noise was recorded at 800rpm, 3500rpm and 5000rpm of a diesel engine. Directions of canceling speaker can be set to $30^{\circ}$, $90^{\circ}$ and $150^{\circ}$ against the primary noise flow by acrylic ducts to be made for the experimentation. DSP board used to control the ANC system. The algorithm of this ANC system applied the Filtered-x-LMS algorithm that is modified to compensate for a property of DSP input signal and the secondary-path effect. As an experiment result, the direction of canceling speaker was proved to influence the reduction effect of noise. The $150^{\circ}$ duct in the attenuation effect of noise showed a better result than the $90^{\circ}$ or $30^{\circ}$ duct.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.184.1-184.1
• /
• 2005

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.329-331
• /
• 2014

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.207-210
• /
• 2008

변압기에서 발생하는 소음은 근무자의 작업환경을 열악케 하는 직접적인 요인이 될 뿐만 아니라 정신적인 스트레스를 받게 되어 작업능률 저하 및 변전소 인접 주민들의 일상생활 환경을 저해하는 요인이 되고 있다. 본 연구에서는 이러한 문제점을 개선하기 위하여 FXAMS 알고리즘을 적용한 변압기의 능동소음제어에 대한 연구를 수행하였으며, 다중음 다채널 제어가 가능한 시스템을 개발하여 현장에 적용한 결과, 120Hz에서는 9.06[dB]의 능동소음감쇄가 이루어졌으며, 전체적으로 4.55[dB]의 감쇄효과가 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.672-672
• /
• 2011

This study describes the comparison of noise suppression performances at different locations of two error microphones in active noise control (ANC) for outdoor applications. For this study, 12 different locations were predefined to decide best locations for error sensors in terms of suppressing noise. As shown in Fig. 1, the ANC system with one primary loudspeaker, two secondary loudspeakers and two error microphones is operated by a filtered-x LMS (FXLMS) algorithm which is implemented in a TI 6713 DSP board and Realsys 4713 AD/DA Extension board. The noise for the primary source is a typical road noise measured at a highway roadside. The lengths of adaptive filters of W1 and W2 are varied from 32 to 128 respectively. An intensive computer simulation was accomplished before outdoor ANC experiments. It is expected from the simulation results that the ANC performances are very much dependent upon the locations of the two error microphones.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.56-62
• /
• 2010

In this paper, a recurrent cerebellar modulation articulation control (RCMAC) has been developed for improvement of noise attenuation performance in active noise control system. For the narrow band noise, a filter-x least mean square (FXLMS) method has bee frequently employed as an algorithm for active noise control (ANC) and has a partial satisfactory noise attenuation performance. However, noise attenuation performance of an ANC system with FXLMS method is poor for broad band noise and nonlinear path since it has linear filtering structure. Thus, an ANC system using RCMAC is proposed to improve this problem. Some simulations in duct system using harmonic motor noise and KTX cabin noise as a noise source were executed. It is shown that satisfactory noise attenuation performance can be obtained.