• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.164-166
• /
• 2008

소음은 현대 사회에서 쉽게 접하게 되는 환경 오염원이다. 능동소음제어(Active Noise Control)는 발생된 소음을 제거하기 위해 구현이 간단한 LMS 알고리즘을 많이 사용하고 있다. 그러나 LMS 알고리즘은 수렴 속도와 소음신호의 변화속도에 따라 발산의 위험을 가지고 있다. 본 논문에서는 이러한 LMS의 문제점을 보완하기 위해 경험 모드 분석법을 이용한 feedback FXLMS(Filtered-X Least Mean Square) 알고리즘을 제안하였다. 소음제거 시스템의 출력단에서 검출된 잔차소음을 경험 모드 분석법(Empirical Mode Decomposition)을 이용하여 IMF 신호들로 분해하고, 분해된 각 신호를 FXLMS 알고리즘을 이용하여 수렴시킨 후, 결과들을 다시 결합하여 소음 제거에 이용하였다. 각각의 IMF 신호를 FXLMS 알고리즘으로 수렴시킬 때 수렴속도에 변화를 주어 소음제거의 효율성을 높였다. 제안한 알고리즘을 Matlab을 이용하여 시뮬레이션하였고 기존의 FXLMS알고리즘보다 향상된 수렴속도 및 안정성을 가짐을 입증하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.240-241
• /
• 2009

The method of the reduction of the duct noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the Least-Mean-Square (LMS) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, When the Filtered-X LMS (FXLMS) algorithm is applied to an ANC system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.12
• /
• pp.827-833
• /
• 2004

In active noise control (ANC) systems, the error-reduction performance of the conventional Filtered-X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortions in the secondary path such as in the power amplifiers, loudspeakers and transducers. In this paper, a nonlinear FXLMS algorithm with high error-reduction performance is proposed to compensate for undesirable nonlinearities in the secondary-path of ANC systems by employing the inverse Volterra filtering approach. In particular, the proposed approach is based on the utilization of the conventional P-th order inverse approach to nonlinearity compensation in the secondary path of ANC systems. Finally, the simulation results showed that the proposed approach yields a better nonlinearity compensation performance for the ANC systems with a nonlinear secondary path than the conventional FXLMS.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.216-222
• /
• 2016

Generation of a quiet zone in noisy environment is undoubtedly of considerable realistic significance. This paper describes development and implementation of a multichannel real-time active noise control (ANC) system for 3 dimensional noisy environment to enhance the quiet zone performance in terms of size and noise cancellation gain. The proposed ANC system employes a multichannel delay-compensated filtered-X least mean square (FXLMS) algorithm; its real-time implementation is designed in TMS320C6713 digital signal processor (DSP) board. The system is evaluated for cancelling various tonal frequency noises in the range from 100 to 500 Hz, and the performance is then illustrated by measuring the quiet zone in terms of sound pressure level (SPL) attenuation. Experiment results show that a quiet zone of quiet with satisfactory size and maximum 24 dB noise attenuation is successfully generated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.551-554
• /
• 2005

The method of the reduction of the automotive induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, When the Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. Thus Normalized FXLMS algorithm was developed to improve the control performance under the rapid acceleration. The advantage of Normalized FXLMS algorithm is that the step size is no longer constant. Instead, it varies with time. But there is one additional practical difficulty that can arise when a nonstationary input is used. If the input is zero for consecutive samples, then the step size becomes unbounded. So, in order to solve this problem. the Correlation FXLMS algorithm was developed. The Correlation FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Correlation FXLMS Is presented in comparison with that of the other FXLMS algorithms based on computer simulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.260-265
• /
• 2014

Recently, many active noise control (ANC) systems, which employ the adaptive filter controlling method, have been reported for eliminating unwanted noise. ANC systems based on the filtered-X least mean square (FXLMS) algorithm have a problem with compensating the acoustic feedback of secondary route. It is difficult to apply the real time, because transfer function of secondary route must be measured by off-line method to solve this problem. In this paper, we propose the ANC system that applies a correlation LMS(CLMS) algorithm for improving a problem of transfer function measurement. The proposed algorithm is based on input of road noise. The proposed ANC systems have an advantage of real-time process without degradation of performance, although there are many calculation compared with FXLMS algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.183-189
• /
• 2003

The study of the automotive noise reduction has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. Recently, the active control method is used to reduce the noise of an automotive exhaust and intake system. It is mostly used the LMS(Least-Mean-Square) algorithm as an algorithm of active control because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an Active Noise Control system. However, the convergence performance of LMS algorithm went bad when the FXLMS algorithm was applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve this problem, the modified FXLMS algorithm is proposed. In this study, the improvement of the control performance using the modified FXLMS algorithm under rapidly and suddenly accelerated driving conditions was identified. Also, the performance of an active control using the LMS algorithm under rapidly accelerated driving conditions was evaluated through the theoretical derivation using a chirp signal to have similar characteristics with the induction noise signal.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1753-1754
• /
• 2006

이 논문에서는 밀폐된 공간 내에서 발생하는 소음을 줄이기 위해 일종의 능동 소음 제어 방법을 발표한다. 제안된 제어방법은 WPFB(Wavelet Packet Filter Bank)를 이용하여 기존의 FXLMS(Filtered-X Least Mean Square) 알고리즘의 단점인, 소음 제어시스템 내에서의 소음전달의 지연으로 인한 불안정성과, 소음의 급작스런 변화에 대한 응답능력부족을 해소하는 방법이다. 이 시스템의 주요 특성은 소음제어 시스템의 이차경로에 WPFB이 삽입되어 FXLMS 알고리즘에 비해 빠른 연산이 수행된다는 것이다. 다른 말로 하면, WPFB는 병렬연산을 수행한다. 그러면, 적응 알고리즘 내에 있는 필터의 웨이트들이 더 빨리 갱신될 것이다. 또한 WPFB는 뛰어난 분해능을 가지고 있어서 아주 미세한 소음까지도 처리해 낼 수가 있다. 이 제어기법의 효율성은 simulation을 통해 증명될 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1016-1019
• /
• 2004

The study of the noise reduction of an automobile has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. The method of the reduction of the induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to this problem, the modified FXLMS algorithm using Moving Bandpass Filter was proposed. In this study, MBPF was implemented and use ANC for automotive intake under revived rapidly accelerated driving conditions and it was verified its performance.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.559-567
• /
• 2020

Vibration at the tip of various flexible manipulators may affect their operation accuracy and work efficiency. To suppress such vibrations, the feasibility of using MFC actuators and sensors is investigated in this paper. Considering the convergence of the famous filtered-x least mean square (FXLMS) algorithm could not be guaranteed while it is employed for vibration suppression of plants with varying secondary path, this paper proposes a new multiple model switching adaptive control algorithm to implement the real time active vibration suppression tests with a new multiple switching strategy. The new switching strategy is based on a cost function with reconstructed error signal and disturbance signal instead of the error signal from the error sensor. And from a robustness perspective, a new variable step-size sign algorithm (VSSA) based FXLMS algorithm is proposed to improve the convergence rate. A cantilever beam with varying tip mass is employed as flexible manipulator model. MFC layers are attached on both sides of it as sensors and actuators. A co-simulation platform was built using ADAMS and MATLAB to test the feasibility of the proposed algorithms. And an experimental platform was constructed to verify the effectiveness of MFC actuators and sensors and the real-time vibration control performance. Simulation and experiment results show that the proposed FXLMS algorithm based multiple model adaptive control approach has good convergence performance under varying load conditions for the flexible cantilever beam, and the proposed FX-VSSA-LMS algorithm based multiple model adaptive control algorithm has the best vibration suppression performance.