• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.533-539
• /
• 2010

Stem cell-based therapy is under intensive investigation to treat acute renal failure (ARF). The purpose of this study was to evaluate available ARF models, and suggest a model appropriate to therapeutic evaluation of the stem cells in preclinical approach by determining the optimum concentration of nephrotoxic agents and duration of ischemia induction. Three different types of available acute kidney injury (AKI) animal models were analyzed using rats: Cisplatin (saline, 5 and 7.5 mg/kg, IP) or glycerol (saline, 8 and 10 ml/kg, IM)-induced nephrotoxicity as toxic models and ischemia-induced (sham, 35 and 45 minutes) nephropathy as an ischemic model. The relevance and applicability to investigate especially the regenerative ability of stem cells were evaluated regarding morphology, renal function and survival at this time point. In the point of renal function, 10 ml glycerol/kg and 7.5 mg cisplatin/kg model in toxic models and 45 min model in ischemia models showed significant decrease for the longer observation time compared to 8 ml glycerol/kg, 5 mg cisplatin/kg and the 35 min ischemia models, respectively. All groups were observed no mortality except 45 min-ischemia model with 50% survival. Histological significant alterations including cast formation in the tubular lumen, tubular necrosis and apoptosis were revealed on the second day in either ischemiaor glycerol-induced models, and on day 5 in cisplatin-induced models. The results indicate that ischemia 35 min-, cisplatin 7.5 mg/kg- and glycerol 10 ml/kg-induced AKI would be ideal animal models to monitor a outcome parameter related to the therapeutic effects on renal function with noninvasive techniques in the same animal at multiple time points. Our findings also suggest that the best time points for the functional or histological interpretation of renal will be on day 2 in both glycerol- and ischemia-induced AKI models and on day 5 in cisplatin-induced AKI.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2013

This study was performed to investigate the antioxidant effect of Sansa (Crataegi fructus) extract in vitro, and to evaluate the functional effects of Sansa powder addition on the quality properties and storage characteristics of Tteokgalbi. Total polyphenol and flavonoid contents of Sansa extract were found to be 127.00 mg/g and 54.05 mg/g, respectively. The DPPH radical scavenging activity of Sansa extract was high and it was similar to the BHA and BHT. The Tteokgalbi was prepared by 0% (N), 0.1% (S1), 1% (S2), and 2% (S3) of the Sansa Powder. Addition of Sansa powder decreased the protein and lipid contents, but the ash content was significantly increased (p<0.05). Increasing the amount of Sansa powder in the pork Tteokgalbi tended to increase the water holding capacity (WHC) values and the cooking loss (p<0.05). The addition of Sansa powder increased the hardness and chewiness values, but did not affect the cohesiveness and springiness values. In the sensory evaluation, the S3 Tteokgalbi had the best score in color. Values of pH, total microbial counts, thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values decreased significantly added Sansa powder relative to the normal (p<0.05). The S3 Tteokgalbi was significantly (p<0.05) more effective for delaying lipid peroxidation than the other groups. Sansa powder addition increased the L (lightness) and a (redness) values. Therefore, the results demonstrate that adding the Sansa powder to the pork Tteokgalbi tended to improve antioxidative and antimicrobial effects during the chilled storage period.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2014

Purpose: Fibrous dysplasia is related to the mutation of gene encoding the alpha-subunit of a signal-transducing G-protein and has variable clinical course. Operation can be performed to prevent functional disorder or structural deformity. After curettage, autologous bone graft were used to fill the defects after curettage. The aim of this study is to compare the result of autogenous cancellous bone grafting and allogenic bone grafting for fibrous dysplasia. Materials and Methods: Among the patients who visit our hospital during the period of April, 1997 to October, 2013, we selected 34 patients who diagnosed fibrous dysplasia and visited our clinic over 1 year. There were 13 males and 21 females. Average age was 26.4 (range 2 to 57) years old. Autogenous bone graft (group I) in 5 cases, Non-autogenous bone graft (group II) in 30 cases. Iliac bone is used in all cases of autogenous bone graft. There were no significant difference in age, follow-up period, preoperational laboratory finding between two groups. Radiographic image was done to evaluate the recurrence of fibrous dysplasia or secondary degeneration. Results: There were four cases in recurrence (group I: 1 case, group II: 3 cases, p=0.554). In all recurrent cases, reoperations were done using curettage and autogenous iliac bone graft. There was no re-recurrence after reoperation. One case of secondary aneurysmal bone cyst was confirmed (group II) and 1 cases of pathologic fractures had developed (group I: 0 case, group II: 1 cases, p=0.559). No malignant change occurred. Conclusion: There were no significant difference between autogenous bone graft group and non-autogenous bone graft group. Our result suggested that autogenous bone graft seems to be good method to treat fibrous dysplasia, in the case of small volume of tumor lesion or non-weight bearing portion.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.3
• /
• pp.377-387
• /
• 1996

Background : In 1980, WHO made a definition in which the term "impairment" as applied to the respiratory system is used to describe loss of lung function, "disability" the resulting diminution in exercise capacity. The measurement of pulmonary function during exercise would give us information about overall functional capacity and respiratory performance that would be lacking in tests performed at rest. We conducted this study to investigate the role of resting pulmonary function test and exercise test for assessing impairment/disability in patients with chronic airflow obstruction(CAO). Method : We studied 19 patients with CAO. The spirometry and body plethysmograph were performed in stable condition. And then patients performed a progressive incremental exercise test to a symptom-limited maximum using cycle ergometer. Patients were divided in two groups, severe and non-severe impairment, according to the resting PFTs and compaired each other. A patient was considered to be severely impaired if FVC < 50 %, FEV1 < 40 % or FEV1/FVC < 40 %. Results : 1) The airway obstruction and hypoxemia of severe impairment group were more severe and exercise performance was markedly reduced compairing to non-severe impairment group. 2) The severe impairment group showed ventilatory limitation during exercise test and the limiting symptomes ware dyspnea in 9/10 patients. 3) The impairment and disability of the patients with tuberculous destructed lung were most marked in patients with CAO. 4) The FEV1 was the most prevalent criterion for the determination of severe impairment based on resting PFTs and was the valuable best correlated to V02max(r=0.81, p < 0.001). 5) The sensitivity of exercise limits for predicting severe disability according to resting PFTs was 80 % and specificity 89 %. Conclusion : In patients with severe CAO, FEV1 is a good predictive of exercise performance and impairment measured by resting PFTs can predict a disability by exercise test.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.53-61
• /
• 2016

Eating supports to gain energy and nutrition and improves quality of life. Ageing affects the food intake ability due to loss of natural teeth and the progressive muscle degeneration. Our objective was to investigate how the food intake ability (FIA) and the remaining teeth could influence on oral health related quality of life in the elderly. This study was performed with 503 elderly subjects living in Daejeon, Korea. The questionnaire with the FIA with 30 Korean food and Oral Health Impact Profile 14 (OHIP-14) and oral examination were surveyed. The five groups according to cluster analysis of FIA had the different numbers of remaining teeth and functional posterior teeth with opposing teeth or prosthesis significantly: group 1, $21.78{\pm}8.27$ and $2.80{\pm}2.63$; group 2, $16.75{\pm}7.87$ and $2.16{\pm}2.44$; group 3, $14.68{\pm}9.77$ and $1.73{\pm}2.30$; group 4, $9.93{\pm}8.13$ and $0.78{\pm}1.68$; group 5, $10.18{\pm}8.37$ and $0.51{\pm}1.22$. The more foods the subjects could masticate, the better oral health related quality of life they had. The medium FIA, soft FIA and the number of remaining teeth could explain 46% of OHIP-14, but hard FIA could not in the multiple regression model. We suggested to develop the oral health program for the elderly to be able to eat the food with medium physical property at least be helpful to improve oral health related quality of life.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.629-638
• /
• 1997

Background : Surgical intervention is known as the principle management for hemoptysis of significant amount. But surgical procedure is applicable to only small number of patients because of increased mortality in emergency surgery and various functional and structural problems after lung resection. Bronchial artery embolization(BAE) has been used as an alternative interventional technique for immediate control of patients with increased risk for surgery due to recurrent or massive hemoptysis. BAE also has limitations such as recurrent bleeding after procedure and its role for the application to small amount of hemoptysis is still not established. Method : To evaluate immediate and long term effectiveness of BAE, we analysed 65 patients with hemoptysis according to therapeutic modalities they received ; BAE versus conservative management. Results : The success rate for immediate control of hemoptysis was significantly higher in BAE group with 43 cases(100%) among 43 cases compared with 17 cases(77%) among 22 cases in conservative group (p < 0.001). The disease control duration was $19.5{\pm}8.06$ months in BAE group and $18.8{\pm}6.06$ months in conservative group(p > 0.05). The therapeutic response in BAE group was 82%(36/43 cases) and 95%(21/22 cases) in conservative group (p > 0.05). According to the amount of hemoptysis, the therapeutic response were seen in 91%(29/32 cases) in less than 100ml and 85%(28/33 cases) in 100~400ml (p > 0.05). According to the manifestation of hemoptysis, the therapeutic response in groups of recurrent and nonrecurent were 87%(20/23 cases) and 88%(37/42 cases)(p > 0.05). Conclusion : The difference of therapeutic response between BAE and conservative group in patients with small amounts of hemoptysis was not found except for immediate control of hemoptysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1358-1365
• /
• 2017

This study evaluated the quality characteristics of muffins prepared with different amounts (0%, 10%, 20%, 30%, 50%) of fucoidan red yeast (Monascus purpureus) rice powder (FRYR). The weight and pH of muffins increased as the amount of FRYR increased. The height and baking loss rate of muffins significantly decreased when amounts of FRYR increased (P<0.05), whereas moisture content was not significantly different between all samples. L value and b value of muffins significantly decreased when amounts of FRYR increased (P<0.05). However, a value of muffins significantly increased when amounts of FRYR increased (P<0.05). Hardness, chewiness, and brittleness increased with increasing FRYR concentration. Cohesiveness was higher with 30% FRYR, whereas springiness was not significantly different between the samples. In the sensory evaluation, the appearance and crumb color of muffins was higher in groups containing 0% FRYR, whereas flavor, taste, texture, and overall acceptability scores were highest for muffins with 50% FRYR added. The total polyphenol content and 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity of muffins significantly increased with increasing addition of FRYR (P<0.05). Therefore, addition of FRYR could satisfy the sensory function and functional requirements of muffins. Furthermore, this study proposes the development of various products using fucoidan red yeast rice.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.41-50
• /
• 2012

The study was carried out to analyze the relationship between analysis of antioxidant activity and the level of functional components according to particle size of corn silk. Particle size was classified into 5 groups. By particle size distribution and color difference, the total phenol content and DPPH radical scavenging activity were observed. The particle sizes of corn silk were $199.17{\mu}m$, $178.27{\mu}m$, $85.48{\mu}m$, $27.4{\mu}m$ and $20.97{\mu}m$, respectively. The lightness of colored pigments was increased when the particle size was decreased. The contents of free sugar (fructose, glucose, galactose, sucrose, and maltose) of corn silk were analyzed using a HPLC. The total phenol contents by the particle sizes of corn silk were 2.01 mg/g, 2.02 mg/g, 2.06 mg/g, 2.26 mg/g and 2.26 mg/g, respectively. DPPH radical scavenging activities of samples were 21.00%, 21.75%, 22.90%, 24.35% and 23.67%, respectively. Antioxidative activities of Trolox and Fe(II) in corn silk were measured by ferric reducing antioxidant power (FRAP) assay and Trolox equivalent antioxidant capacity (TEAC) assay. TEAC values of samples were $2.36{\mu}mol$ TE / g dw, $2.81{\mu}mol$ TE / g dw, $3.20{\mu}mol$ TE / g dw, $3.36{\mu}mol$ TE / g dw, and $3.44{\mu}mol$ TE / g dw, respectively. FRAP values of samples were $11.67{\mu}mol$ Fe(II) / g dw, $12.80{\mu}mol$ Fe(II) / g dw, $13.43{\mu}mol$ Fe(II) / g dw, $13.85{\mu}mol$ Fe(II) / g dw and $15.95{\mu}mol$ Fe(II) / g dw, respectively. Total phenolic content and antioxidantive activities based on FRAP assay and TEAC assay were increased with decreasing particle size. In addition, DPPH radical scavenging activity was also increased. A significant correlation was also noted between DPPH radical scavenging activities and the content of phenolic compounds.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.