• The Korean Journal of Food And Nutrition
• /
• v.36 no.3
• /
• pp.202-208
• /
• 2023

FT-IR, GC/MS, and ATR-FT-IR analyses were performed to confirm the physicochemical characteristics of saw palmetto fruit (SPF) extract. FT-IR analysis of the standard product showed that the band corresponding to the carbonyl bond of free fatty acid was stronger than the band of acyl-glyceride. Sample E was identified as having the same trend as the standard sample. Fatty acid composition analysis revealed that the main fatty acids in the standard sample were lauric acid and oleic acid. The content of lauric acid ranged from approximately 30% to 38% in samples B, C, D, and E, while the content of oleic acid ranged from approximately 29% to 34%. The GC/MS analysis confirmed that the standard SPF extract consisted of fatty acids and fatty acid ethyl esters. Sample E demonstrated a similar pattern to the standard samples in terms of oleic acid, lauric acid, and fatty acid esters. ATR-FT-IR analysis indicated that only sample E was predicted to contain 100% saw palmetto extract. Therefore, these study findings can be considered fundamental data for analyzing the physicochemical characteristics of the composition of SPF extract.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.193-199
• /
• 2016

Purpose: The purpose of this study was to know of photopolymerization effect of self-etch dual-cured resin cement on different transmittance and thickness of zirconia disks. Methods: The two types of transparent and opaque zirconia speciments were prepared. The five speciments of each groups were seperated with 0.5mm and 1.0mm thickness. Degree of conversion(DC) were studied by FT-IR spectroscopy using ATR method before and after irradidaion for 40 sec. Results: The relative DC was showed the higher results of ZS5 as compared with ZS10 (p < 0.05). And OP5 and OP10 were lower results than ZS10 (p < 0.05). Conclusion: The photopolymerization effect of dual-cured resin cement were affected by the transmittance and thickness of zirconia.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.100.2-100.2
• /
• 2015

반도체 산업이 성장하고 기술이 향상됨에 따라 소자의 소형화가 이루어지고 있다. 공정법으로는 atomic layer deposition (ALD), chemical vapor deposition (CVD) 등이 있다. 이러한 공정을 이용하여 수십 nm까지 미세화가 진행되고 있으며, 복잡한 구조의 박막을 실현하기 위해 전구체의 개발이 활발히 진행되고 있다. 전구체의 특성을 비실시간으로 분석하는 방법으로는 질량 분석법, 가스크로마토그래피, 적외선 분광법 등이 있다. 전구체의 특성을 실시간으로 분석하기 위해 Fourier transform infrared spectroscopy (FTIR)내에 attenuated total reflectance (ATR)를 거치시켰다. 본 연구는 구조를 개선한 ATR-FTIR을 이용하여 Tris-(dimethylamino) Zirconium (CpZr) 전구체의 흡착 거동을 분석하였다. ATR용 crystal은 Ge crystal을 사용했으며, 온도를 각각 30, 40, $50^{\circ}C$에서 CpZr 전구체의 흡착특성을 연구했다. 흡착성을 증가시키기 위해 Ge crystal 표면에 $ZrO_2$나노입자를 분포시켜 흡착특성을 비교 분석하였다. 또한 CpZr 전구체가 흡착된 Ge crystal 표면에 오존가스를 주입시킨 후 변화를 관찰하였다. Ge crystal표면에 나노입자를 분포시켜 CpZr 전구체를 흡착한 결과 나노입자를 분포시키지 않았을 때 보다 흡착강도가 높게 나타났다. 또한 CpZr 전구체가 흡착된 Ge crystal 표면에 오존가스를 주입한 결과 C-H 결합이 분해됨을 확인했다.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.383-387
• /
• 1998

The effect of hydrophilic surface modification of low density polyethylene(LDPE) byt the plasma gas($O_2$, $N_2$, and $O_2/N_2$) was investigated from the point of view of the functionalities of the generated LDPE surfaces and the contact angle. By virtue of x-ray photoelectron spectra(XPS) and attenuated total reflectance(FT-IR ATR) analysis, the LDPE surfaces treated with plasma were generated with oxygen functionalities of carbonyl, carboxyl, and the like, nitrogen functionalities by nitrogen plasma and mixing of nitrogen and oxygen plasma treatment were identified with. It was found that nitrogen plasma treatment showed with minimum value at contact angle for rf-power and treatment time, we had obtained optimum condition for hydrophilic surface modification at composite parameter, [(W/FM)t] 520~550GJs/kg.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.509-526
• /
• 2016

Purpose: We would like to find the alternative method for the weathering test on rubber coated fabrics and adhesive-coated fabrics for the military products, KS M 0706 (Sunshine carbon arc) to KS M ISO 4892-2 (Xenon arc). Methods: We measured the tensile strength of adhesive-coated fabrics and adhesive products treated with sunshine carbon arc and xenon arc during 100, 150 and 200 hours, respectively. All of the results were treated with statistical test, ANOVA method. We also validate the surface modifications caused by treatment method and time by using FT-IR ATR and, SEM. Results: In case of the thick adhesive-coated fabrics (app. 1 mm), there was no distinctive difference on tensile strength by treatment method and time. In case of the thin mask hood (app. 0.22 mm) and TENT (app. 0.5 mm), there was distinctive difference on tensile strength. Especially, carbon arc showed a huge lowering properties. We could validate the curing from light and moisture, and the functional group change from cross-linking and oxidation using FT-IR ATR. In case of IBS, there was a surface cracks on SEM images. In case of mask hood, there was no distinctive differences, except for a particle falling from decreased affinity between rubber and particles caused by carbon arc. Conclusion: We concluded that there was no problems for changing xenon arc weathering test with same treatment time on IBS, KM7, K21 and adhesive products. In case of TENT and mask hood, there was a difference in tensile strength in accordance with the change of the treated time and method.

• Journal of Adhesion and Interface
• /
• v.9 no.1
• /
• pp.9-15
• /
• 2008

EVA foam was treated by oxygen plasma under a various treatment time for surface modification. The effect of plasma treatment on surface properties of EVA foam was investigated in terms of FT-IR ATR, XPS, contact angle, and SEM analysis and the adhesion characteristic of the EVA foam was studied in peel strength. As a results, EVA foam treated by plasma led to an elimination of organic compound, an increase of oxygen content, and an increase of surface roughness, resulting in improving the adhesion properties of the EVA foam. As the plasma treatment time increased, the hydrophilicity and physical change of surface of the EVA foam were increased and showed maximum value at 180 s and 420 s, respectively. The maximum adhesion strength appeared at plasma treatment time of 420 s and therefore, in this study the physical change was thought to be a major factor for improving the adhesion of the EVA foam.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.274-281
• /
• 2009

Nylon 6 and nylon elastomer were prepared by anionic polymerization route. Nylon elastomers, composed of hard segment of polyamide(PA) and soft segment of polyether(PE), were synthesized by use of TDI terminated polyol with caprolactam. The morphology of the electrospun webs of nylon and nylon elastomers, observed by FE-SEM, showed that the porous electrospun web was composed of nanofibers, whose diameter were in the range of 100 to 180 nm. Their behavior of melting and crystallization and the chemical structure of nylon elastomers were investigated by DSC and ATR FT-IR. Result of tensile testing indicated that nylon has higher tensile strength and lower elongation than nylon elastomers. Atmospheric plasma(APP) with $O_2$ and $N_2$ as reactive gas modified the surface of electrospun nylon and electrospun nylon elastomers allowing them higher hydrophilicity, while APP with $CH_4$ as reactive gas modified the surface of polymers allowing higher hydrophobicity.

• Corrosion Science and Technology
• /
• v.13 no.5
• /
• pp.170-177
• /
• 2014

Polyurethane coating was designed to give a hydrophobic property on its surface by modifying it with hydroxyl terminated polydimethylsiloxane and then effects of surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified polyurethane coating were examined using FT-IR/ATR spectroscopy, contact angle measurement and electrochemical impedance test. As results, the surface of polyurethane coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between polyurethane and modifier by the modification. The phase separation tendency is more appreciable when modified by polydimethylsiloxane with higher content. Water transport behavior of the modified polyurethane coating decreased more in that with higher hydrophobic surface property. The decrease in the impedance modulus ${\mid}Z{\mid}$ at low frequency region in immersion test for polyurethane coatings was associated with the water transport behavior and surface hydrophobic properties of modified polyurethane coatings. The corrosion protectiveness of the modified polyurethane coated carbon steel generally increased with an increase in the modifier content, confirming that corrosion protectiveness of the modified polyurethane coating is well agreed with its water transport behavior.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1252-1252
• /
• 2001

The aim of this study was to evaluate the possibility to characterize and classify waxes applied on some type of cheeses to obtain good stability during handling and transportation. Generally, waxes are obtained from the petrochemical industry, nowadays there is the possibility to also use biodegradable waxes produced from microorganisms. Preliminary studies were carried out to optimize sample presentation in NIR analysis, such as melting conditions (influence of temperature) and coat thickness of wax. 12 waxes (biodegradable or not) were analysed by using an InfraAlyzer 500 (Bran+Luebbe). The sample size was performed cutting pieces of 1.5 cm (height) x 1.5 cm (width) x 1.5 mm (thickness), previously melted at 9$0^{\circ}C$. NIR spectra were collected at room temperature, and data were processed by Sesame Software (Bran+Luebbe) to evaluate qualitative differences among samples by cluster analysis. Waxes were gathered on the basis of their origin (petrochemical or microbial). To better understand the significance of the NIRS bands discriminating among waxes, a two-dimensional correlation with FT-IR spectra, collected by a FT-IR/ATR 420 (JASCO) instrument, was made using 2DCORR program (Galactic Industries). On the basis of its classification power, NIRS appears to be a promising tool when used in routine analysis for a qualitative control of raw materials.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.699-706
• /
• 2001

The effects of uniaxial drawing conditions on the molecular orientation of poly (ethylene 2,6-naphthalate) (PEN) are investigated. Birefringence measurements show that the orientation is significantly enhanced at high draw ratio, low drawing temperature, and fast drawing speed. The characteristics of orientation examined by FTIR- ATR dichroism method represent almost same results. Amorphous orientation function increases with drawing rate at $120^{\circ}C$, but it decreases with drawing rate at $141^{\circ}C$. These behaviors can be explained with the relation between crystallization and chain relaxation rates. It is observed that the orientation of PEN film is accompanied by significant alignment of the naphthalene rings of PEN parallel to the film surface.