• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.123-125
• /
• 2001

In general, the PSS/E program is used for analyzing KEPCO System in terms of stability and the EMTDC Program is needed to analyze the transient characteristics of power system. The FSS/E provides various control models such as exciter. governor and PSS models whereas there ale few control of models in EMTDC. In this paper. we developed an EMTDC model for IEEET3 exciter which has been applied in KEPCO system. The EMTDC model is developed by examining PSS/E control block and using User Define Model in addition to default.lib provided by EMTDC we verify the correctness of developed IEEET3 model with PSS/E and EMTDC simulation results for the same test system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1060-1070
• /
• 2003

The frequency selective surface for use in Ka/Ku band parabolic antenna of domestic satellite communications is proposed. The frequency selective surface structure consists of the infinite periodic arrays of the triple square loop slot element with narrow width on the honeycomb structure of multi-layered dielectric. The frequency selective surface is fabricated and measured. The good agreement is obtained between theory and experiment. It is demonstrated that the frequency selective surface passes 14/12 GHz band wave while reflecting 30/20 GHz band wave as required.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.206-212
• /
• 2015

This paper introduces new wideband antenna-filter-antenna (AFA) uniform arrays that can be utilized as frequency selective surfaces (FSS) with low loss and sharp roll-off response, which are highly desirable characteristics for millimeter wave applications. The design adopts a simple 3-layer single polarization structure consisting of two patch antennas and a resonator. Both simulations and measurements are used to characterize the performances of the proposed design. Overall results show 18.5% 10-dB bandwidth. For the targeted band the insertion loss is less than 0.2 dB. Possible applications include quasi-optical amps, grid mixers and radomes for aircraft radar antennas.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1912-1921
• /
• 2003

This paper presents a global mode modeling of space structures and a control scheme from the practical point of view. Since the size of the satellite has become bigger and the accuracy of attitude control more strictly required, it is necessary to consider the structural flexibility of the spacecraft. Although it is well known that the finite element (FE) model can accurately model the flexibility of the satellite, there are associated problems : FE model has the system matrix with high order and does not provide any physical insights, and is available only after all structural features have been decided. Therefore, it is almost impossible to design attitude and orbit controller using FE model unless the structural features are in place. In order to deal with this problem, the control design scheme with the global mode (GM) model is suggested. This paper describes a flexible structure modeling and three-axis controller design process and demonstrates the adequate performance of the design with respect to the maneuverability by applying it to a large flexible spacecraft model.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.781-787
• /
• 1999

In this note, we propose two methods of adaptive sliding mode control(SMC) schemes in which fuzzy systems(FS) are utilized to approximate the unknown system functions. In the first method, a FS is utilized to approximate the unknown function f of the nonlinear system $\chi$$^{(n)}$$\chi$＝f(equation omitted), t)＋b(equation omitted), t)u and the robust adaptive law is proposed to reduce the approximation errors between the true nonlinear function and fuzzy approximator, FS. In the second method, two FSs are utilized to approximate f and b, respectively. The robust control law is also designed. The stabilities of proposed control schemes are proved.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.141-146
• /
• 2010

특수선(FPSO, Drillship)의 거주구역이나, 대형 여객선(크루즈선) 공간의 70% 이상을 차지하는 수용시설(accommodation) 즉, 객실, 라운지, 공공장소, 창고 등은 24시간 사람이 상주하는 구역임으로 화재로부터 완벽하게 보호되어야 한다. 이를 위해 국제해사기구(IMO)에서는 SOLAS II-2 Reg. 10.6과 FSS code Ch. 8에 적합한 미분무수 소화설비를 설치할 것을 강제화하고 있다. 이러한 미분무수 소화설비는 미분무수 노즐, 압력용기, 섹션밸브, 펌프유닛 등으로 구성되는데 특히 핵심부품인 미분무수 노즐은 IMO Res. MSC 265(84)에 따라 노즐성능시험 및 화재진압성능시험을 통해 형식승인을 득해야 한다. 본 연구에서 이러한 기준에 만족하는 미분무수 노즐을 개발하고자 선실 및 복도에 대한 화재시험에 이어 공공장소 화재시험을 수행하였으며, 두 가지 천장 높이에 대한 화재진압성능을 평가하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.59-67
• /
• 2009

본고를 통해 초고주파 이론과 공학 분야는 물론 물리학, 재료공학의 기초 학문 분야에서도 지대한 관심을 모으고 있는 Metamaterial(MTM) 구조에 대해 조명하고자 한다. 먼저 MTM의 핵심이라고 할 수 있는 Left-Handedness(LH) 왼손 전파 법칙과 LH 발생 재질인 Double Negative(DNG) 재질에서의 전파 특성을 상대 유전율과 상대 투자율 평면에서 확인하고, 일반 매질인 Double Positive(DPS)형인 오른손 전파 법칙 Right-Handedness(=RH) 매질과의 결합(Composite Right-and Left-Hnaded=CRLH)에서 얻어지는 특징들을 살펴본다. 특히 DPS와 DNC의 결합에서 얻을 수 있는 음의 공진과 0차 공진(Zero-Order Resonance)을 언급하고 ZOR을 응용한 RF 부품의 소형화와 특성 개선사례를 소개한다. 또한, 안테나와 전자파 산란 특성에 MTM의 특수한 성질을 이용하여, 크기를 줄이거나 표면파를 억제하거나 혹은 방사 개구를 확대 또는 렌즈 특성을 얻어낸 사례도 언급된다 그리고 LH 특성은 아니지만 MTM 계열인 ENG(Epsilon Negative), MNG(Mu Negative), ENZ(Epsilon Near Zero)를 응용한 예들을 보이고, MTM 관점에서 FSS(Frequency Selective Surface )의 특성을 논의하고, 그간에 발표된 대표적 MTM 연구 결과에 대한 소개를 마치고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.118-123
• /
• 2007

This paper studied the transmission control protocol over IP network to enhance the performance of the GSO satellite communication networks. The focus of this study is how to reduce the long round trip time and the transmission data rates over satellite link in the bidirectional satellite network. To do it, this study applied the caching and spoofing technology. The spoofing technology is used to reduce the required time for the link connection during communication. The caching technology is to improve the transmission bandwidth efficiency in the high transmission data rate link The tests and measurements in this study was performed in the commercial GSO communication satellite network and the terrestrial Internet network. The results of this paper show that the studied protocol in this paper highly enhance the performance of the bidirectional satellite communication network compare to the using TCP/IP satellite network protocol.

• Journal of electromagnetic engineering and science
• /
• v.14 no.3
• /
• pp.306-313
• /
• 2014

A Fabry-Perot resonator cavity antenna for Ku-band application is presented in this paper. The Fabry-Perot cavity is formed by a ground plane and a frequency selective surface (FSS) made of a circular hole array. The cavity resonance is excited by a single-feed microstrip patch located inside the cavity. The measured results show that the proposed antenna has an impedance bandwidth of approximately 13% ($VSWR{\leq}2$) and a 3-dB gain bandwidth of approximately 7%. The antenna produces a maximum gain of 18.5 dBi and good radiation patterns over the entire 3-dB gain bandwidth. The antenna's very thin profile, high directivity, and single excitation feed make it promising for use in wireless and satellite communication applications in a Ku-band frequency.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.411-414
• /
• 2008

In order to study the effect of lubrication during hot rolling, ferritic stainless steel (FSS) sheet were hot-rolled with and without application of lubrication. The effect of two hot rolling processes on the evolution of texture and microstructure after hot rolling, cold rolling and subsequent recrystallization annealing was studied by means of macro-texture analysis and microstructure observations. After hot rolling, the specimen rolled with lubrication showed rolling textures at the sheet surface, while the specimen rolled without lubrication displayed shear textures in the outer layers of the sheet. Hot rolling with lubrication was beneficial to the formation of strong recrystallization textures at sheet surface. However, hot rolling with lubrication led to the formation of orientation colonies in outer thickness layers of the recrystallized sheet.