• 제목/요약/키워드: FSS

검색결과 218건 처리시간 0.022초

루프 종류의 FSS가 결합된 복합재료 구조의 잔류응력과 전파 투과 특성 (Study on Thermal Residual stresses and Transmission Characteristics in Loop Type Frequency Selective Surface Embedded Composite Structures)

  • 박경미;황인한;전흥재;홍익표;박용배;김윤재
    • Composites Research
    • /
    • 제26권5호
    • /
    • pp.279-288
    • /
    • 2013
  • 본 논문은 Loop 종류의 주파수 선택적 투과구조(FSS)를 결합시킨 복합재료 구조의 잔류응력으로 인한 층간분리, FSS의 손상 등 구조적 파손과 잔류응력으로 인해 변형된 FSS의 전파 투과 특성의 영향을 연구하였다. FSS는 단위요소 종류, 설계 변수, 배열에 따라 일정 대역에 전파를 투과 혹은 반사시킬 수 있다. 그래서 사각 루프 FSS를 복합재료와 결합시켰을 때 X-band(8~12 GHz)에서 공진이 발생하도록 설계한 후, 그에 따른 치수를 규격화하여 다른 루프형상(삼각 루프, 원형 루프)에 적용하고 단일 Loop와 이중 Loop 구조일 때 복합재료의 적층을 변화시켜 비교 분석하였다.

47/48GHz FSS 위성 시스템과의 주파수 공유를 위한 HAPS 지상국의 최대 허용 off-axis e.i.r.p. 레벨 제안 (A Proposal of the Maximum Allowable Off-axis e.i.r.p. Level of HAPS Ground Station for Frequency Sharing with 47/48GHz FSS system)

  • 강영흥;최문환
    • 한국정보통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.459-464
    • /
    • 2007
  • ITU-R 결의 122는 47/48GHz 대역에서 위성 우주국 수신기와의 주파수 공유를 위해 HAPS 지상국에 대한 전력 제한에 대한 연구를 요구하고 있으며, ITU-R 권고 SF.1481-1에서는 FSS 시스템과의 주파수 공유를 위해 HAPS 지상국의 안테나 방사 패턴의 사이드 로브 특성을 개선하도록 권고하고 있다. 이에 본 논문에서는HAPS 및 GSO FSS 서비스 커버리지간 비현실적인 이격거리를 줄이면서 결의 122에서 요구하고 있는 HAPS 지상국에 대한 전력 제한 및 권고 SF.1481-1의 지상국 안테나 사이드 로브 개선 등을 고려한 지상국의 최대 허용 off-axis e.i.r.p. 레벨을 제안함으로써 HAPS 지상국과 FSS 위성 수신기간의 주파수 공유의 가능성을 보인다.

Fabrication of Hybrid Composite Plates with an Active Frequency Selective Surface

  • Seo, Yun-Seok;Chun, Heoung-Jae;Hong, Ic-Pyo;Park, Young-Bae;Kim, Yoon-Jae
    • Composites Research
    • /
    • 제30권5호
    • /
    • pp.273-279
    • /
    • 2017
  • This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.

Design and Fabrication of a Reconfigurable Frequency Selective Surface Using Fluidic Channels

  • Son, Dong Chan;Shin, Hokeun;Kim, Yoon Jae;Hong, Ic Pyo;Chun, Heoung Jae;Park, Yong Bae
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권6호
    • /
    • pp.2342-2347
    • /
    • 2017
  • In this study, we design a reconfigurable frequency selective surface (FSS) using fluidic channels to use the FSS in multi-frequencies. Effective permittivity can be changed using water as the fluid of fluidic channels in a dielectric slab, and the frequency characteristics of FSS can be controlled. We optimize the dimensions of the fluidic channel to design a reconfigurable FSS and measure its transmission characteristics.

소형 공진 개구의 2차원 주기적 배열에 의한 전자파 산란 (Electromagnetic Scattering by a Two-Dimensional Periodic Array of Small Resonant Apertures)

  • 고지환;이종익;조영기
    • 한국전자파학회논문지
    • /
    • 제22권3호
    • /
    • pp.320-326
    • /
    • 2011
  • 공진되는 개구와 비공진 개구로 구성되는 두 가지 형태의 FSS 구조에 대해 전부 투과되는 응답을 비교 연구하였다. 입사파가 전부 투과할 때 공진 개구의 FSS 구조는 파장 ${\lambda}$ 대 배열 주기 T의 비에 대해 비공진 개구의 FSS인 경우보다 더 큰 비를 가짐을 알 수 있었고, 또한 동작 주파수는 공진 구조를 이용함에 의해 상당히 낮출 수 있다. 이러한 물리적 상황은 현재 물리학 분야에서 널리 연구되고 있는 공진형의 특이한 광투과 현상과 유사한 성질을 지닌다고 사료된다.

Design of a 170 GHz Notch Filter for the KSTAR ECE Imaging Sensor Application

  • Mohyuddin, Wahab;Woo, Dong Sik;Kim, Sung Kyun;Kim, Kang Wook;Choi, Hyun-Chul
    • 센서학회지
    • /
    • 제25권1호
    • /
    • pp.8-12
    • /
    • 2016
  • A planar, light-weight, and low-cost notch filter structure is required for the KSTAR ECEI (Electron Cyclotron Emission Imaging) system to protect the mixer arrays from spurious plasma heating power. Without protection, this heating power can significantly degrade or damage the performance of the mixer array. To protect mixer arrays, a frequency selective surface (FSS) structure is the suitable choice as a notch filter to reject the spurious heating power. The FSS notch filter should be located between the lenses of the ECEI system. This paper presents a 170 GHz FSS notch filter for the KSTAR ECEI sensor application. The design of such an FSS notch filter is based on the single-sided square loop geometry, because that makes it relatively insensitive to the incident angle of incoming wave. The FSS notch filter exhibits high notch rejection with low pass-band insertion loss over a wide range of incident angles. This paper also reviews the simulated and measured results. The proposed FSS notch filter might be implemented in other millimeter-wave plasma devices.

비행 시나리오에 따른 FSS 레이돔의 전파 투과 특성 변화 분석 (Analysis on Change in Electrical Transmission Characteristic about FSS Radome on Flight Scenario)

  • 김선휘;배형모;김지혁;이남규;남주영;박세진;조형희
    • 한국추진공학회지
    • /
    • 제23권6호
    • /
    • pp.11-20
    • /
    • 2019
  • 레이돔은 레이더를 외부 환경으로부터 보호하는 역할을 하며, 스텔스 기술의 일환으로 주파수 선택 표면이 레이돔에 적용되고 있다. 본 연구에서는 Jerusalem-cross(JSC) 형상이 적용된 주파수 선택 표면 레이돔에 대해 비행 시나리오 상 공력가열로 인해 미사일의 FSS 레이돔의 전파 투과 특성의 변화를 다루었다. 이 내용을 바탕으로 공력가열에 따른 전파 투과 특성을 레이돔의 위치에 따라, 시간에 따라 수치 해석적으로 분석하였다. 수치 해석적 연구로 상용 프로그램 ANSYS Fluent 15.0과 COMSOL Multiphysics 5.2를 사용하였다. 비행 시나리오 상 전파 투과 특성의 변화로 초기 대역폭에 대한 평균 투과율 수치가 최대 -14.3 dB까지 변화하는 것을 확인할 수 있었다.

CBRS 서비스를 위한 FSS 지구국 주파수 공동사용 (Frequency Sharing with FSS Earth Stations for CBRS Services)

  • 강영흥
    • 한국항행학회논문지
    • /
    • 제23권6호
    • /
    • pp.507-514
    • /
    • 2019
  • FCC (Federal Communications Commission)는 해군 레이더 및 고정지구국 제1 업무로 사용하고 있는 3.5 GHz (3,550 - 3,700 MHz) 대역을 공동사용으로 CBRS (citizen broadband radio service) 시스템이라는 스몰셀의 저전력망 구축이 가능하도록 규정을 제정하였다. CBRS를 위한 공동사용 기술은 3-tiered SAS (spectrum access system)에 기반하여 하위계층 유저로부터 상위계층 유저를 보호하고 가용 스펙트럼을 최적으로 이용할 수 있어 국내에서도 적극적으로 CBRS 도입을 검토하기 시작하였다. 그러나 3.5 GHz 대역은 국내에서 이미 5G용으로 할당되어 있어, 본 논문에서는 3,700 - 5,000 MHz 대역에서 주파수 공동사용 연구를 수행하였다. 그 결과 3.8 GHz 대역(3,800 - 3,900 MHz)이 FSS(fixed satellite service)용으로 한정되어 있어, 주파수 공동사용이 가능한 대역으로 검토되었으며 FSS 지구국에 미치는 간섭분석을 수행하여 국내의 CBRS 도입을 모색하고자 한다.

유체전단응력에 의하여 3T3-L1 지방세포가 받는 영향 (Effects of Fluid Shear Stress on 3T3-L1 Preadipocytes)

  • 이정근;이영훈;진희원;이서현;김지현
    • 대한의용생체공학회:의공학회지
    • /
    • 제39권4호
    • /
    • pp.168-174
    • /
    • 2018
  • Adipocytes affect obesity through the regulation of lipid metabolism. Physical loading is an important regulator of fat tissue. There are ongoing in vitro studies inducing mechanotransduction on 3T3-L1 preadipocytes with mechanical stimulus in order to treat obesity by inhibiting adipogenesis and provoking cell death. In this study, our goal was to suggest a new therapy for obesity by investigating whether fluid shear stress (FSS) changes transcription factors on 3T3-L1 related with adipogenesis and cell death. FSS loading was applied to 3T3-L1 preadipocytes at 1Pa and 1Hz. After loading, bright field images were taken and an immunofluorescence assay was conducted to observe actin stress fiber formation. Western blot analysis was conducted to identify the activation of the ERK pathway as well as the adipogenic factors, which including C/EBPs and $PPAR{\gamma}$. The expression of osteopontin, a protein related to inflammation in adipose tissue, and cell death related factors, Bax, Bcl-2, and Beclin, were also measured. Results showed that FSS stimulated the formation of actin stress fibers in 3T3-L1 and also that the activation of C/EBPs decreased significantly when compared with the control group. $PPAR{\gamma}$ activation in the 2 hour FSS group was lower than the 1 hour FSS group, which implied that the results were time dependent. Additionally, there were no differences in the expression of cell death factors after FSS loading. In summary, similar to other fibroblasts, the formation of actin stress fibers induced by mechanotransduction may affect the differentiation of 3T3-L1, leading to inhibition of adipogenesis and inflammation.

혼합 패치를 이용한 Ku 대역 위성통신용 광대역 배열 안테나 설계 (Wideband Array Antenna Design for Ku-Band Satellite Communications Using Mixed Patches)

  • 김성훈;고지환
    • 한국항행학회논문지
    • /
    • 제27권3호
    • /
    • pp.281-286
    • /
    • 2023
  • 본 논문은 고정위성업무(FSS; Fixed-Satellite Service) 및 방송위성업무(BSS; Broadcasting-Satellite Service)의 다운링크 대역을 통합하는 Ku 대역의 위성통신용 광대역 혼합 패치 배열 안테나의 설계에 관한 것으로써, 제안한 안테나는 FR4 기판 상에 사각 패치를 6 x 2 형태로 배열하여 구현되었다. FSS 다운링크 대역(10.7~10.95 GHz, 11.2~11.45 GHz) 및 BSS 다운링크 대역(11.7~12.5 GHz, 12.2~12.75 GHz, 11.7~12.2 GHz)을 모두 포함하는 광대역(10.7~12.75 GHz) 안테나를 설계하기 위해 11.5 GHz 및 12.5 GHz에서 동작하는 사각 패치를 각각 교대로 배열하였고 이를 통해 중심주파수의 30.8%에 해당하는 광대역을 확보하였다. 안테나의 성능을 확인하기 위해 제안한 안테나를 제작 및 측정하였고 모의시험 결과와 유사함을 확인하였으며 따라서 제안된 안테나는 FSS 및 BSS 다운링크를 위한 안테나로 적용이 가능하다.