• 제목/요약/키워드: FRP sheet

검색결과 133건 처리시간 0.019초

접촉 폭발 하중을 받는 RC 슬래브의 국부 손상 및 내폭 성능 평가 (Evaluating Local Damages and Blast Resistance of RC Slabs Subjected to Contact Detonation)

  • 리령;이진영;민경환;윤영수
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권1호
    • /
    • pp.37-45
    • /
    • 2013
  • 본 연구에서는 다양한 RC 슬래브의 접촉 발파 실험을 수행하여 내폭 성능을 평가하였다. RC 슬래브의 내폭 성능 향상을 위해 섬유 보강과 외부 CFRP 시트 보강을 도입하였다. 폭발하중 실험은 $2,000{\times}1,000{\times}100mm$ RC 슬래브를 제작하였고, 일반 콘크리트와 강섬유 보강 콘크리트, 하이브리드 PVA 섬유 보강 시멘트 복합체, 초고성능 콘크리트를 적용하였다. 접촉 발파로 생긴 RC 슬래브의 손상 정도를 크레틀, 스폴과 브리치의 직경과 깊이로 평가하였다. 실험 결과를 LS-DYNA 유한요소해석 프로그램과 Morishita 등의 예측식으로 검증하고 비교분석하였다. 분석 결과, LS-DYNA 프로그램을 이용하여 크레틀, 스폴, 브리치의 직경 및 깊이에 대한 개략적인 예측이 가능하며, 폭발하중 하에서 손상부의 거시적 거동을 모사함으로써 부재의 파괴 이력을 나타낼 수 있었다. 국부 손상에 대한 세가지 예측식이 소개되어 있으나 경험식으로써의 한계가 존재하며, 이에 대한 추가 연구가 필요하다고 판단된다.

Strengthening of steel-concrete composite beams with composite slab

  • Subhani, Mahbube;Kabir, Muhammad Ikramul;Al-Amer, Riyadh
    • Steel and Composite Structures
    • /
    • 제34권1호
    • /
    • pp.91-105
    • /
    • 2020
  • Steel-concrete composite beam with profiled steel sheet has gained its popularity in the last two decades. Due to the ageing of these structures, retrofitting in terms of flexural strength is necessary to ensure that the aged structures can carry the increased traffic load throughout their design life. The steel ribs, which presented in the profiled steel deck, limit the use of shear connectors. This leads to a poor degree of composite action between the concrete slab and steel beam compared to the solid slab situation. As a result, the shear connectors that connects the slab and beam will be subjected to higher shear stress which may also require strengthening to increase the load carrying capacity of an existing composite structure. While most of the available studies focus on the strengthening of longitudinal shear and flexural strength separately, the present work investigates the effect of both flexural and longitudinal shear strengthening of steel-concrete composite beam with composite slab in terms of failure modes, ultimate load carrying capacity, ductility, end-slip, strain profile and interface differential strain. The flexural strengthening was conducted using carbon fibre reinforced polymer (CFRP) or steel plate on the soffit of the steel I-beam, while longitudinal shear capacity was enhanced using post-installed high strength bolts. Moreover, a combination of both the longitudinal shear and flexural strengthening techniques was also implemented (hybrid strengthening). It is concluded that hybrid strengthening improved the ultimate load carrying capacity and reduce slip and interface differential strain that lead to improved composite action. However, hybrid strengthening resulted in brittle failure mode that decreased ductility of the beam.

디지털 이미지 분석을 통한 지속 하중과 온도의 복합 환경이 CFRP 쉬트와 콘크리트의 부착강도 및 크리프 거동에 미치는 영향 분석 (Combined Effects of Sustained Load and Temperature on Pull-off Strength and Creep Response between CFRP Sheet and Concrete Using Digital Image Processing)

  • 정유석;이재하;김우석
    • 콘크리트학회논문집
    • /
    • 제28권5호
    • /
    • pp.535-544
    • /
    • 2016
  • 본 연구에서는 디지털 이미지를 사용하여 DIC(Digital Image Correlation) 기법 및 부착파괴면 분석을 통해 부착파괴에너지와 부착강도의 정량적 분석뿐만 아니라 계면의 부착 면 파괴 양상의 정성적 접근을 통해 지속 하중과 온도의 복합 하중에 대한 FRP 부착 실험체의 거동을 분석하였다. 이를 위해 CFRP 쉬트를 부착한 일면전단실험체를 제작하여 사용하였다. 일면전단실험체의 지속 하중 기간의 거동은 에폭시 크리프의 영향을 상당히 받으며 지속 하중 기간 동안에 에폭시의 점탄성 특징으로 인해 응력완화가 발생하였다. 응력완화는 지속 하중 이후 실시한 계면전단실험에서 사용한 DIC 기법을 통해 관찰 하였으며 지속하중 기간 동안의 응력완화로 인해 지속하중 실험체의 최대부착파괴하중 및 계면파괴에너지가 대조실험체보다 증가하였다. 모든 실험체의 부착 파괴 면을 디지털 이미지화하여 파괴 면의 양상을 정성적/정량적으로 분석 하였다. 디지털 이미지 분석 결과 지속 하중 기간 동안 파괴 형태가 콘크리트면내파괴에서 계면부착파괴 형태로 전이가 발생하였으며 이러한 전이로 인해 지속하중 기간이 증가할수록 지속하중의 최대부착파괴하중에 대한 긍정적인 효과 감소하였다.