• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.309-316
• /
• 1999

Laminated composite plates are very useful in various fields of engineering where high strength-to-weight and stiffness-to-weight ratios are required. Design optimization of composite structures has gained importance in recent years as the engineering applications of fiber reinforced materials have increased and weight savings has become an essential design objective. However, due to the anisotropic material properties of laminated composite structure it is very difficult to analyze and design. In this study, numerical optimization technique together with the finite element method is used to find the optimum design of FRP. Various combination of fiber orientation for the laminate layers are investigated and several local optimum solutions are found.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1145-1160
• /
• 2015

An experimental study was conducted for the effectiveness of steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups in concrete beam to carry shearing force and comparison was made with conventional steel bar stirrups. A total numbers of 8 concrete beams were tested under four point loads. Each beam measured 1,600 mm long, 160 mm width and 240 mm depth. The beams were composed of same grade of concrete, with same amount of flexural steel but different shear reinforcements. The main variables include, type of stirrups (shape of stirrups and number of CFRP layers used in each stirrup) and number of stirrups used in shear spans. After getting on an excellent closeness between the values of ultimate shear resistance and ultimate tensile load of steel-CFRP stirrups, it could be concluded that the steel-CFRP stirrups represent the effective solution of premature failure of FRP stirrups at the bends.

• Steel and Composite Structures
• /
• 제14권5호
• /
• pp.453-472
• /
• 2013

This paper presents the structural behavior of CFRP (carbon fiber reinforced polymer) strengthened CFT (concrete-filled steel tubes) columns under axial loads. Circular and square specimens were selected to investigate the retrofitting effects of CFRP sheet on CFT columns. Test parameters are cross section of CFT, D/t (B/t) ratios, and the number of CFRP layers. The load and ductility capacities were evaluated for each specimen. Structural behavior comparisons of circular and rectangular section will be represented in the experimental result discussion section. Finally, ultimate load formula of CFRP strengthened CFT will be proposed to calculate the ultimate strength of CFRP strengthened circular CFT. The prediction values are in good agreement with the test results obtained in this study and in the literature.

• Composites Research
• /
• 제31권6호
• /
• pp.332-339
• /
• 2018

섬유 금속 적층판(Fiber metal hybrid laminate, FML)은 금속재료와 FRP의 접합으로 기존의 금속 소재가 가지지 못했던 뛰어난 물성과 가벼운 무게로 경제적인 구조용 재료로 사용된다. 그러나 섬유의 형태와 종류, 적층조건에 따라 물성의 차이가 크며, 파괴거동을 예측하기 어렵다는 단점이 있다. 본 논문에서는 Al6061-T6 합금에 직조형태의 유리섬유 플라스틱(GFRP, GEP118)을 적층피막한 복합재의 파손거동에 대해 연구한다. Al합금에 GFRP 1, 3, 5 겹을 피막한 3가지 조건으로 성형하고, 피막의 적층수를 변수로 정적시험과 저주기 피로시험을 병행하여 파손거동을 분석하였다. 저주기 피로시험에서는 변형률-수명 해석, 전변형률 에너지밀도법을 사용하여 분석하고, 피로수명을 예측하여 하이브리드 재료에 대한 수명예측성을 분석하였다. 인장해석 결과, GFRP 피막으로 인한 강화효과는 없었고, 피로시험시 나타나는 히스테리시스 형상은 GFRP피막 유무와 피막 수에 상관없이 모재인 Al합금의 거동을 따랐다. 저주기 피로시험 결과 GFRP의 피막으로 피로강도가 증가하였지만, GFRP의 두께에 따라 비례하여 증가하지는 않았다.

• 대한토목학회논문집
• /
• 제28권6A호
• /
• pp.861-872
• /
• 2008

콘크리트충전 유리섬유 복합소재 튜브는 좋은 내구성과 심한 부식환경에서 견딜 수 있는 높은 화학적인 저항성으로 인해서 해양구조물에서 종종 사용된다. 이 연구는 원형 콘크리트충전 유리섬유 복합소재 튜브에 대한 다양한 실험을 수행하고 결과를 분석한다. 유리섬유 직포 수적층, 필라멘트 와인딩 적층을 압축을 받는 관의 바깥 튜브로 사용하는 경우에 고려해야 하는 몇 가지 측면을 실험 분석한다. 이 연구의 목적은 다음과 같다: (1) 유리섬유 층의 필라멘트 와인딩 각도의 효율성 검증 (2) GFRP 적층수가 강도 및 최고 변형률에 미치는 영향 평가 (3) 단부 재하조건이 구속효과 및 파괴양상에 미치는 영향 파악, 그리고 (4) 구속 상태에서 콘크리트의 응력-변형률 거동을 모사하는 해석적인 모델 제시이다. 세 가지 서로 다른 종류의 섬유 구성이 사용되었다: 직포층, ${\pm}45^{\circ}$ 필라멘트 와인딩 층, 그리고 ${\pm}85^{\circ}$ 필라멘트 와인딩 층. 각 층은 독립적으로 혹은 복합적으로 함께 사용되었다. 시편의 비 및 지름이 서로 다른 경우도 실험하였다. 총 27개의 GFRP 튜브 시편을 이용해서 인장 실험을 수행하였고, 66개의 콘크리트충전 GFRP튜브 시편을 이용해서 압축 실험을 수행하고 결과를 분석하였다. 구속상태의 콘크리트 응력-변형률 거동을 모사하는 해석적인 모델 및 영향계수를 제시하였다.

• Steel and Composite Structures
• /
• 제30권5호
• /
• pp.417-432
• /
• 2019

This paper presents the results of axial compression testing and numerical modeling on reinforced concrete columns (RCC) with normal concrete (NC) and high-strength concrete (HSC), RCC confined by glass-fiber reinforced plastic pipes (GRP) casing as well as carbon fiber reinforced polymer (CFRP), The major parameters evaluated in the experiments were the effects of concrete type, GRP casing and CFRP wrapping, as well as the number of CFRP layers. 12 cylindrical RCC ($150{\times}600mm$) were prepared and divided into two groups, NC and HSC. Each group was divided into two parts; with and without GRP casing. In each part, one column was without CFRP strengthening layer, a column was wrapped with one CFRP layer and another column with two CFRP layers. All columns were tested under concentrated compression load. Numerical modeling was performed using ABAQUS software and the results of which were compared with experimental findings. A good agreement was found between the results. Results indicated that the utilization of CFRP wrapping and GRP casing improved compression capacity and ductility of RCC. The addition of one and two layer-FRP wrapping increased capacity in the NC group to an average of 18.5% and 26.5% and in the HSC group to an average of 10.2% and 24.8%. Meanwhile, the utilization of GRP casing increased the capacity of the columns by 3 times in the NC group and 2.38 times in the HSC group. The results indicated that although both CFRP wrapping and GRP casing increased confinement, the GRP casing gave more increase capacity and ductility of the RCC due to higher confinement. Furthermore, the confinement effect was higher on NC group.

• Structural Engineering and Mechanics
• /
• 제62권1호
• /
• pp.79-84
• /
• 2017

Utilizing composite members in structures has been considered by many researchers in the past few decades. Using FRP can be very effective owing to its excessively high-tensile strength, which compensate concrete weak performance in tension. In this research, the studied composite beam includes a GFRP semi-confined trapezoidal section covered by GFRP and concrete layers. To assess the bearing capacity, a finite-element model of a composite beam subjected to displacement control loading has been developed and the results were validated using experimental results found throughout the literature. Several parameters affecting the bending performance and behavior of the semi-confined beam have been investigated in this study. Some of these parameters included the thickness of GFRP trapezoidal section members, concrete layer thickness, GFRP layer thickness and the confinement degree of the beam. The results revealed that the beam confinement had the highest effect on the bearing capacity due to prevention of separation of concrete from GFRP which causes the failure of the beam. From the results obtained, an optimal model of primary beam section has been introduced, which provides a higher bearing capacity with the same volume of materials used in the original beam section.

• Steel and Composite Structures
• /
• 제19권2호
• /
• pp.441-465
• /
• 2015

This paper presents the experimental results of flexural and compression steel members strengthened with carbon fiber reinforced polymers (CFRP) sheets. In the flexural test, the five specimens were fabricated and the test parameters were the number of CFRP ply and the ratio of partial-length bonded CFRP sheets of specimen. The CFRP sheet strengthened steel beam had failure mode: CFRP sheet rupture at the mid span of steel beams. A maximum increase of 11.3% was achieved depending on the number of CFRP sheet ply and the length of CFRP sheet. In the compression test, the nine specimens were fabricated and the main parameters were: width-thickness ratio (b/t), the number of CFRP ply, and the length of the specimen. From the tests, for short columns it was observed that two sides would typically buckle outward and the other two sides would buckle inward. Also, for long columns, overall buckling was observed. A maximum increase of 57% was achieved in axial-load capacity when 3 layers of CFRP were used to wrap HSS columns of b/t = 60 transversely.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.231-251
• /
• 2019

In the present study, a numerical and experimental investigation has been carried out on the seismic behavior of RC columns of a bridge which damaged under corrosive environments and retrofitted by various techniques including combined application of CFRP sheets and steel profiles. A novel hybrid retrofitting procedure, including the application of inner steel profiles and outer peripheral CFRP sheets, has been proposed for strengthening purpose. Seven large-scale RC columns of a Girder Bridge have been tested in the laboratory under the influence of simultaneous application of constant axial load and the lateral cyclic displacements. Having verified the finite element modeling, using ABAQUS software, the effects of important parameters such as the corrosion percentage of steel rebars and the number of CFRP layers have been evaluated. Based on the results, retrofitting of RC columns of the bridge with the proposed technique was effective in improving some measures of structural performance such as lateral strength degradation and higher energy absorption capability. However, the displacement ductility was not considerably improved whereas the elastic stiffness of the specimens has been increased.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.