Browse > Article
http://dx.doi.org/10.12989/scs.2019.30.5.417

Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping  

Sajedi, Fathollah (Department of Civil Engineering, Ahvaz Branch, Islamic Azad University)
Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz)
Publication Information
Steel and Composite Structures / v.30, no.5, 2019 , pp. 417-432 More about this Journal
Abstract
This paper presents the results of axial compression testing and numerical modeling on reinforced concrete columns (RCC) with normal concrete (NC) and high-strength concrete (HSC), RCC confined by glass-fiber reinforced plastic pipes (GRP) casing as well as carbon fiber reinforced polymer (CFRP), The major parameters evaluated in the experiments were the effects of concrete type, GRP casing and CFRP wrapping, as well as the number of CFRP layers. 12 cylindrical RCC ($150{\times}600mm$) were prepared and divided into two groups, NC and HSC. Each group was divided into two parts; with and without GRP casing. In each part, one column was without CFRP strengthening layer, a column was wrapped with one CFRP layer and another column with two CFRP layers. All columns were tested under concentrated compression load. Numerical modeling was performed using ABAQUS software and the results of which were compared with experimental findings. A good agreement was found between the results. Results indicated that the utilization of CFRP wrapping and GRP casing improved compression capacity and ductility of RCC. The addition of one and two layer-FRP wrapping increased capacity in the NC group to an average of 18.5% and 26.5% and in the HSC group to an average of 10.2% and 24.8%. Meanwhile, the utilization of GRP casing increased the capacity of the columns by 3 times in the NC group and 2.38 times in the HSC group. The results indicated that although both CFRP wrapping and GRP casing increased confinement, the GRP casing gave more increase capacity and ductility of the RCC due to higher confinement. Furthermore, the confinement effect was higher on NC group.
Keywords
Reinforced Concrete Columns (RCC); GRP casing; CFRP wrapping; High Strength Concrete (HSC); axial force; ductility; numerical modeling;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Wong, Y., Yu, T., Teng, J. and Dong, S. (2008), "Behavior of FRPconfined concrete in annular section columns", Compos. Part B: Eng., 39(3), 451-466.   DOI
2 Wu, G., Lu, Z. and Wu, Z. (2006), "Strength and ductility of concrete cylinders confined with FRP composites", Constr. Build. Mater., 20(3), 134-148.   DOI
3 Xiao, Y. and Wu, H. (2000), "Compressive behavior of concrete confined by carbon fiber composite jackets", J. Mater. Civil Eng., 12(2), 139-146.   DOI
4 Xiao, J., Tresserras, J. and Tam, V.W. (2014), "GFRP-tube confined RAC under axial and eccentric loading with and without expansive agent", Constr. Build. Mater., 73, 575-585.   DOI
5 Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stress- strain model for concrete confined by FRP composites", Compos. Part B: Eng., 38(5-6), 614-628.   DOI
6 ABAQUS, A.S. (2011), User's manual; Version 6.11. 1. Dassaults Systemes Inc.
7 ACI 211 (1991), Standard practice for selecting proportions for normal, heavyweight and mass concrete.
8 Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of Concrete Structures Reinforced with Fiber Reinforced Polymers Bars: A Review", J. Asian Sci. Res., 7(5), 165.
9 Almusallam, T.H. (2007), "Behavior of normal and high-strength concrete cylinders confined with E-glass/epoxy composite laminates", Compos. Part B: Eng., 38(5-6), 629-639.   DOI
10 Aghaee, K. and Foroughi, M. (2013), "Mechanical properties of lightweight concrete partition with a core of textile waste", Adv. Civil Eng., 1-7.
11 Andalib, Z., Kafi, M.A., Bazzaz, M. and Momenzadeh, S. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106.   DOI
12 Csuka, B. and Kollar, L.P. (2010), "FRP-confined circular concrete columns subjected to concentric loading", J. Reinf. Plast. Compos., 29(23), 3504-3520.   DOI
13 Ardalan, R.B., Joshaghani, A. and Hooton, R.D. (2017), "Workability retention and compressive strength of selfcompacting concrete incorporating pumice powder and silica fume", Constr. Build. Mater., 134, 116-122.   DOI
14 ASTM, B. (2001), D2996-Standard Specification for Filament-Wound Fiberglass; Glass-Fiber-Reinforced Thermosetting-Resin Pipe.
15 Bazzaz, M., Darabi, M.K., Little, D.N. and Garg, N. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Proceedings of the Transportation Research Record, Transportation Research Board 96th Annual Meeting. http://journals.sagepub.com/doi/abs/10.1177/0361198118782033
16 Dundar, C., Erturkmen, D. and Tokgoz, S. (2015), "Studies on carbon fiber polymer confined slender plain and steel fiber reinforced concrete columns", Eng. Struct., 102, 31-39.   DOI
17 Jiang, S.-F., Ma, S.-L. and Wu, Z.-Q. (2014), "Experimental study and theoretical analysis on slender concrete-filled CFRP-PVC tubular columns", Constr. Build. Mater., 53, 475-487.   DOI
18 Goodarzi, A., Mehrmashhadi, J. and Esmailzadeh, E. (2009), "Optimised braking force distribution strategies for straight and curved braking", Int. J. Heavy Vehicle Syst., 16(1), 78.   DOI
19 Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
20 Hamidian, M., Shariati, A., Khanouki, M.M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essays, 7(21), 1997-2001.
21 Joshaghani, A. (2017), "The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete", Constr. Build. Mater., 150, 583-590.   DOI
22 Kazemi, M.T., Momenzadeh, S.-B. and Hoseinzadehasl, M. (2012), "Study of reduced beam section connections with web opening", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, September.
23 Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div.
24 Khairallah, F. (2013), "Mechanical behavior of confined selfcompacting reinforced concrete circular columns under concentric axial loading", Ain Shams Eng. J., 4(4), 641-649.   DOI
25 Khanouki, M.M.A., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. DOI: http://dx.doi.org/10.1016/j.jcsr.2016.01.002   DOI
26 Lam, L. and Teng, J. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6-7), 471-489.   DOI
27 Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., Int. J., 63(2), 259-268.
28 Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of Tilted Angle Shear Connectors", PLOS ONE, 10(12), 1-11. DOI: 10.1371/journal.pone.0144288
29 Kumutha, R., Vaidyanathan, R. and Palanichamy, M. (2007), "Behaviour of reinforced concrete rectangular columns strengthened using GFRP", Cement Concrete Compos., 29(8), 609-615.   DOI
30 Le, H.T.N., Poh, L.H., Wang, S. and Zhang, M.-H. (2017), "Critical parameters for the compressive strength of highstrength concrete", Cement Concrete Compos., 82, 202-216.   DOI
31 Mander, J.B., Priestley, M.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826.   DOI
32 Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. DOI: http://dx.doi.org/10.1016/j.engfailanal.2013.08.014   DOI
33 Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809.   DOI
34 Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons Inc.
35 Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., Int. J., 16(3), 497-519.   DOI
36 Momenzadeh, S., Seker, O., Faytarouni, M. and Shen, J. (2017), "Seismic performance of all-steel buckling-controlled braces with various cross-sections", J. Constr. Steel Res., 139, 44-61.   DOI
37 Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., Int. J., 28(4), 483-494.
38 Parvin, A. and Jamwal, A.S. (2005), "Effects of wrap thickness and ply configuration on composite-confined concrete cylinders", Compos. Struct., 67(4), 437-442.   DOI
39 Pessiki, S., Harries, K.A., Kestner, J.T., Sause, R. and Ricles, J.M. (2001), "Axial behavior of reinforced concrete columns confined with FRP jackets", J. Compos. Constr., 5(4), 237-245.   DOI
40 Rahai, A., Sadeghian, P. and Ehsani, M.R. (2008), "Experimental behavior of concrete cylinders confined with CFRP composites", Proceedings of the 14th World Conference on Earthquake Engineering.
41 Saafi, M., Toutanji, H.A. and Li, Z. (1999), "Behavior of concrete columns confined with fiber reinforced polymer tubes" ACI Mater. J., 96(4), 500-509.
42 Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424.
43 Shariati, M. (2008), "Assessment Building Using Nonedestructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia, Malaysia.
44 Samaan, M., Mirmiran, A. and Shahawy, M. (1998), "Model of concrete confined by fiber composites", J. Struct. Eng., 124(9), 1025-1031.   DOI
45 Shahawy, M., Mirmiran, A. and Beitelman, T. (2000), "Tests and modeling of carbon-wrapped concrete columns", Compos. Part B: Eng., 31(6-7), 471-480.   DOI
46 Sharbatdar, M.K.B., Kashiha, N. and Zahra, A. (2008), "Behavior of Fiber Concrete under Impact and Explosive Load", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
47 Shariati, A. (2014), "Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete", M.Sc.; Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya, Malaysia.
48 Plastics, A.C.D.-o. (2010), Standard test method for tensile properties of plastics; ASTM International.
49 Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays, 6(1), 213-220.
50 Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011b), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
51 Shariati, M., Ramli Sulong, N.H., Sinaei, H., Khanouki, A., Mehdi, M. and Shafigh, P. (2011c), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307.   DOI
52 Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 1-18. DOI: 10.1617/s11527-015-0762-8
53 Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. DOI: 10.1016/j.matdes.2011.08.008   DOI
54 Shariati, M., Shariati, A., Sulong, N.R., Suhatril, M. and Khanouki, M.A. (2014a), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134.   DOI
55 Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014b), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.036   DOI
56 Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.05.102   DOI
57 Sheikh, S.A. (2002), "Performance of concrete structures retrofitted with fibre reinforced polymers", Eng. Struct., 24(7), 869-879.   DOI
58 Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579.
59 Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, Int. J., 21(5), 525-530.
60 Testing, A.S.f. and Materials (2004), Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes; ASTM International.
61 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Tonnizam Mohamad, E. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440.
62 Tokgoz, S., Dundar, C. and Tanrikulu, A.K. (2012), "Experimental behaviour of steel fiber high strength reinforced concrete and composite columns", J. Constr. Steel Res., 74, 98-107.   DOI
63 Vincent, T. and Ozbakkaloglu, T. (2013), "Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high-and ultra high-strength concrete", Compos. Part B: Eng., 50, 413-428.   DOI