• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.635-642
• /
• 2003

최근들어 노후화된 교량의 증가에 따라 바닥판의 보강효과에 대한 많은 연구가 이루어지고 있으나 대부분의 연구는 실험실 수준에 국한되어 있으며, 구조물의 피로거동은 이동하중이 아닌 고정반복하중에 의한 연구가 집중적으로 시행되고 있다. 본 연구에서는 이동하중의 영향을 반영하기 위하여 국내에서 실측된 축하중으로 활하중 모델을 제시하였다. 확률론적 해석과 신뢰성 해석을 적용하여 탄소섬유쉬트와 격자형 탄소섬유로 성능향상된 바닥판의 보강효과 및 연장수명을 예측한 결과 성능향상 된 설계 2등급의 교량바닥판은 일반적인 증가 차량하중에 대하여 사용기간동안 충분한 내하력뿐만 아니라 충분한 피로거항성을 갖는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1135-1152
• /
• 2015

Most of current bridge decks are made of reinforced concrete and often deteriorate at a relatively rapid rate in operational environments. The quick deterioration of the deck often impacts other critical components of the bridge. Another disadvantage of the concrete deck is its high weight in long-span bridges. Therefore, it is essential to examine new materials and innovative designs using hybrid system consisting conventional materials such as concrete and steel with FRP plates which is also known as composite deck. Since these decks are relatively new, so it would be useful to evaluate their performances in more details. The present study is dedicated to Hat-Shape composite girder with concrete slab. The structural performance of girder was evaluated with nonlinear finite element method by using ABAQUS and numerical results have been compared with experimental results of other researches. After ensuring the validity of numerical modeling of composite deck, parametric studies have been conducted; such as investigating the effects of constituent properties by changing the compressive strength of concrete slab and Elasticity modulus of GFRP materials. The efficacy of the GFRP box girders has been studied by changing GFRP material to steel and aluminum. In addition, the effect of Cross-Sectional Configuration has been evaluated. It was found that the behavior of this type of composite girders can be studied with numerical methods without carrying out costly experiments. The material properties can be modified to improve ultimate load capacity of the composite girder. strength-to-weight ratio of the girder increased by changing the GFRP material to aluminum and ultimate load capacity enhanced by deformation of composite girder cross-section.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.54-59
• /
• 2004

최근 개발되고 있는 전자자기 컴퍼스를 이용한 소형어선의 항행자동화시스템을 구축하기 위한 기초 연구로서, 부두에 계류된 선박에서 각종 장비의 가동 시켰을 때 나타나는 컴퍼스 오차 변화를 측정하여 비교 분석한 결과를 요약하면 다음과 같다. 1. 목선에서 85kW의 집어등을 점등하였을 때, 조타용 자기컴퍼스는 7$^{\circ}$편서되었고, 전자자기 컴퍼스는 13$^{\circ}$~16$^{\circ}$ 까지 편서되는 것으로 나타났다. 2. FRP 어선에서 13OkW의 집어등을 점등하였을때, 전자자기 컴퍼스는 19$^{\circ}$~23$^{\circ}$ 까지 편동되는 것으로 나타났다. 3. 강선에서 225kW의 전력으로 각종 장비를 가동 시킬 때, 가동전과 비교하여 컴퍼스 오차의 차분은 조타용 자기 컴퍼스에서는 13$^{\circ}$ 편서되고, 전자자기 컴퍼스는 상갑판에서는 68$^{\circ}$ 편서되었고, 선수루 갑판과 조타실 및 컴퍼스갑판에서는 각각 16$^{\circ}$, 32$^{\circ}$, 20$^{\circ}$ 편동되어 나타났다. 4. 소형어선의 항행자동화시스템에 전자자기 컴퍼스를 활용하기 위해서는 선박내에서 사용하는 각종 장비에 의해 발생하는 컴퍼스 오차를 측정하여 적절하게 수정하여 사용해야 할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.399-414
• /
• 1997

This paper presents an investigation into the seismic response characteristics of a proposed ligh-weight pedestrian cable-stayed bridge made entirely from Glass Fiber Reinforced Plastics(GFRP). The study employs three dimensional finite element models to study and compare the dynamic characteristics and the seismic response of the GFRP bridge to a conventional Steel-Concrete (SC) cable-stayed bridge alternative. The two bridges were subjected to three synthetic earthquakes that differ in the frequency content characteristics. The performance of the GFRP bridge was compared to that of the SC bridge by normalizing the live load and the seismic internal forces with respect to the dead load internal forces. The normalized seismically induced internal forces were compared to the normalized live load internal forces for each design alternative. The study shows that the design alternatives have different dynamic characteristics. The light GFRP alternative has more flexible deck motion in the lateral direction than the heavier SC alternative. While the SC alternative has more vertical deck modes than the GFRP alternative, it has less lateral deck modes than the GFRP alternative in the studied frequency range. The GFRP towers are more flexible in the lateral direction than the SC towers. The GFRP bridge tower attracted less normalized base shear force than the SC bridge towers. However, earthquakes, with peak acceleration of only 0.1 g, and with a variety of frequency content could induce high enough seismic internal forces at the tower bases of the GFRP cable-stayed bridge to govern the structural design of such bridge. Careful seismic analysis, design, and detailing of the tower connections are required to achieve satisfactory seismic performance of GFRP long span bridges.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.412-417
• /
• 1992

In full-speed cruising, the airborne sound pressure levels are measured from 11 small fishing boats operated around Cheju Island. In these measurement, 9 measuring positions are selected in each fishing boats. The results of measurements and analyses are as follows: 1. The sound pressure levels in FRP boats are higher than those in wooden boats. 2. The highest sound pressure level is 112dB(A) at the engine room in C boat, while the lowest one is 72dB(A) at the front deck in K boat. 3. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 4. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 5. Through all 9 positions, the sound pressure levels are higher in B and C boat and lower in E and K boats.

• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.51-59
• /
• 2018

본 논문에서는 해상에서 수상감시정찰 및 수중탐색임무를 수행할 수 있는 복합임무 무인수상정을 설계하였으며, 설계된 복합임무 무인수상정의 선체부는 유리섬유강화플라스틱을 이용하여 제작하였다. 수상감시정찰 및 자율운항 임무를 수행하기 위해 레이더, 라이다, 카메라 등과 같은 다양한 항법센서를 마스트에 장착하였으며, 특수임무를 수행하기 위한 더미건 장비를 선수부 갑판에 장착하였다. 악천후의 해상상태에서 주어진 임무를 성공적으로 수행하기 위해서는 갑판에 탑재된 구조물들에 대한 강성확보가 매우 중요하다. 따라서 본 논문에서는 정하중, 횡하중 및 수직방향 운동에 따른 마스트 구조물의 강도해석 및 더미건 장비의 충격량에 대한 선체부의 강도해석을 시뮬레이션 및 실험을 통해 수행하였다. 시뮬레이션 및 실험 결과에 따라 본 연구에서 설계된 마스트 구조물 및 더미건 장착부의 선체부는 충분한 강성을 확보하고 있음을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.43-50
• /
• 2018

본 연구에서는 강주형과 바닥판의 합성에 사용되는 전단연결재에 대한 연구를 위해 세계 각국에서 사용되는 설계기준과 연구사례를 분석하고 교량 바닥판에 작용하는 각종 수직하중으로 인해 강주형과 콘크리트 슬래브의 접촉면에 발생하는 수평방향의 전단력을 전달하는 이 연결재를 설치한 밀어내기 시험체에 대하여 전단실험을 수행하였으며, 이 시험을 통하여 철근 대신 FRP 철근이 배치된 Steel strap 바닥판의 전단열재 평가식을 제안하였다. 본 연구에서의 제안식은 도로교설계기준의 전단연결재 허용강도 대비 약 3배의 안전율을 가지고 있으며, 기존의 DIN 기준과 Viest 평가식과 비교하면 5%정도의 오차로 유사한 결과를 보여주었다.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.91-105
• /
• 2020

Steel-concrete composite beam with profiled steel sheet has gained its popularity in the last two decades. Due to the ageing of these structures, retrofitting in terms of flexural strength is necessary to ensure that the aged structures can carry the increased traffic load throughout their design life. The steel ribs, which presented in the profiled steel deck, limit the use of shear connectors. This leads to a poor degree of composite action between the concrete slab and steel beam compared to the solid slab situation. As a result, the shear connectors that connects the slab and beam will be subjected to higher shear stress which may also require strengthening to increase the load carrying capacity of an existing composite structure. While most of the available studies focus on the strengthening of longitudinal shear and flexural strength separately, the present work investigates the effect of both flexural and longitudinal shear strengthening of steel-concrete composite beam with composite slab in terms of failure modes, ultimate load carrying capacity, ductility, end-slip, strain profile and interface differential strain. The flexural strengthening was conducted using carbon fibre reinforced polymer (CFRP) or steel plate on the soffit of the steel I-beam, while longitudinal shear capacity was enhanced using post-installed high strength bolts. Moreover, a combination of both the longitudinal shear and flexural strengthening techniques was also implemented (hybrid strengthening). It is concluded that hybrid strengthening improved the ultimate load carrying capacity and reduce slip and interface differential strain that lead to improved composite action. However, hybrid strengthening resulted in brittle failure mode that decreased ductility of the beam.