• 한국수자원학회논문집
• /
• 제32권4호
• /
• pp.427-435
• /
• 1999

Clark 모형은 홍수수문학에서 널리 이용되는 합성단위유량도 추정을 위한 모형이다. 본 연구에서는 미계측유역에 Clark 모형을 적용하기 위한 매개변수 추정기법을 고안하여 적용하였다. 모형의 시간-면적유하곡선은 해석적인 방법으로 유도하였으며 모형을 무차원화 하였다. 도달시간의 계산을 위하여 지형학적 자기상사성을 이용한 공식을 적용하였으며 저류상수는 유역의 시간특성의 상사성 공식을 이용하여 추정하였다. 제안된 모형의 타당성을 검토하기 위하여 동곡의 실측자료와 모형의 결과를 비교한 결과 비교적 잘 일치되는 경향을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.251-254
• /
• 2004

The aging diagnosis technique using partial discharge detection method detects partial discharge signals cause of power equipment failuer and able to forecast the aging state of insulation system through analysis algorithm, in this paper accumulates HFPD signal during constant scheduled cycles to build HFPD pattern and then analyzes HFPD pattern using statistical parameters and ${\Delta}F$ pattern. The 3D pattern is composed of detected signal frequency, amplitude and repeated number and the FRPDA(frequency resolved partial discharge analysis) technique is used in 3D pattern construction. The ${\Delta}F$ pattern shows variation characteristics of amplitude gradient of consecutive HFPD signal Pulses and able to classify discharge types-internal discharge, surface discharge and coronal discharge etc. Fractal mathematics applied to ${\Delta}F$ pattern quantification and neural networks is used in aging diagnostic algorithm.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1393-1404
• /
• 2005

Fatigue crack growth and life have been estimated based on established empirical equations. In this paper, an alternative method using artificial neural network (ANN) -based model developed to predict fatigue damages simultaneously. To learn and generalize the ANN, fatigue crack growth rate and life data were built up using in-plane bending fatigue test results. Single fracture mechanical parameter or nondestructive parameter can't predict fatigue damage accurately but multiple fracture mechanical parameters or nondestructive parameters can. Existing fatigue damage modeling used this merit but limited real-time damage monitoring. Therefore, this study shows fatigue damage model using backpropagation neural networks on the basis of X -ray half breadth ratio B / $B_o$, fractal dimension $D_f$ and fracture mechanical parameters can estimate fatigue crack growth rate da/ dN and cycle ratio N / $N_f$ at the same time within engineering limit error ($5\%$).

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.218-218
• /
• 2015

Urbanization and waterworks construction in natural watershed have been causing higher flood risks in lowland areas. Detention basins have become one of the most efficient fundamental instruments for storm water and environmental management at watershed scale. Nowadays, there are many studies coupled numerical methods of flood routing with optimization algorithms to investigate factors that impact on the efficiency of detention basins in flood reduction in a watershed, such as detention basin location, size, and cost and watershed characteristics. Although these couplings have been become more widespread but cumbersome computation and hydraulic data requirement still are their limitations. To tackle the procedure efforts due to numerical integration and data collection, simple approach is proposed to primarily estimate effects of detention basins. The approach basis is the linear system theory applied to the solution of hydrologic flood routing. The paper introduces an analytical method for estimating detention effects deriving by recent studies and innovatively analyses this equation on fractal perspective. Then, an optimization technique is performed by applying harmony search algorithms (HSA) to optimize efficiency of detention basins at watershed scale. The location and size of upstream detention basin are simultaneously obtained. Finally, the proposed methodology, practically applied for a real watershed in Kan river, Iran.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.1007-1010
• /
• 2017

본 논문에서는 건물 내에서 통신성능 저하의 원인이 되는 인접 채널의 신호를 제어하기 위해 대역 저지 특성을 갖는 주파수 선택 표면구조를 설계하였다. 제안된 구조는 입사파의 편파 및 입사각에 안정적인 주파수 특성 구현을 위해 프랙탈 형상 기반의 소형화된 단위구조를 사용하였으며, 실제 적용성을 고려, 적은 제작비용으로 대량생산이 용이한 인쇄전자 기술을 이용하여 얇은 필름형 주파수 선택 표면구조를 제작하였다. 전통적인 회로제작 방식인 PCB 공정이 아닌 전도성 Ag 잉크를 이용한 스크린 프린팅 공정을 통해 생산성 및 환경성을 개선하였으며, 설계한 결과를 바탕으로 자유공간 측정을 통해 입사파의 편파 및 입사각에 대한 안정적인 특성을 검증하고, 실제 건물 내벽에 적용 후, 수신 신호강도 측정을 통해 주파수 선택 성능을 확인하였다.

• Carbon letters
• /
• 제28권
• /
• pp.47-54
• /
• 2018

High surface carbon aerogels with hierarchical and tunable pore structure were prepared using ionic liquid as carbon precursor via a simple salt templating method. The as-prepared carbon aerogels were characterized by nitrogen sorption measurement and scanning electron microscopy. Through instant visual observation experiments, it was found that salt eutectics not only serve as solvents, porogens, and templates, but also play an important role of foaming agents in the preparation of carbon aerogels. When the pyrolyzing temperature rises from 800 to $1000^{\circ}C$, the higher temperature deepens the carbonization reaction further to form a nanoporous interconnected fractal structure and increase the contribution of super-micropores and small mesopores and improve the specific surface area and pore volume, while having few effects on the macropores. As the mass ratio of ionic liquid to salt eutectics drops from 55% to 15%, that is, the content of salt eutectics increases, the salt eutectics gradually aggregate from ion pairs, to clusters with minimal free energy, and finally to a continuous salt phase, leading to the formation of micropores, uniform mesopores, and macropores, respectively; these processes cause BET specific surface area initially to increase but subsequently to decrease. With the mass ratio of ionic liquids to salts at 35% and carbonization temperature at $900^{\circ}C$, the specific surface area of the resultant carbon aerogels reached $2309m^2g^{-1}$. By controlling the carbonization temperature and mass ratio of the raw materials, the hierarchically porous architecture of carbon aerogels can be tuned; this advantage will promote their use in the fields of electrodes and adsorption.

• 동의생리병리학회지
• /
• 제22권5호
• /
• pp.1057-1061
• /
• 2008

For the purpose of investigating the reasonable logics contained in physiognomy of east and old western medicine. hypothetical researches based on hydromechanics theory were performed concerning facial types of form and pathologic features, especially 4 types of Dr. Jisan-Essence, Qi energy. Emotional Activity and Blood(EQAB). In order to infer the functional relation between facial type forming and EQAB factors, EQAB were supposed as fluid grounded on their continual flowing or periodical change and pressure effect from its congestion. and a premise that there's a linear corresponding relationship between the appearance of organ and its physical conditions of its inner vessels is formed too. Through this work, the unit fluid model(UFM) of Essence can be assumed as circle shape formed by the high viscosity and surface tension, the UFM model of Qi energy as quadrangular shape by the scattering features to outer four directions, and the UFM of emotional activity as inverted triangular shape by the flippant and uprising features, and the UFM of blood as ellipsoid triangle by the heavy and descending features in spite of circulation. The shapes made from each UFM are reproduced in the process of human development and manifest respective facial shape through the self-reproduction method like fractal theory in the last. Conclusively. it is said that the facial form analysis method like EQAB type theory can be the useful methodology to understand the human pathological and physiological features in view of hydromechanics.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.52-61
• /
• 1998

We studied behaviour pattern of anchovy (Engraulis japonicus) shoal by a method of shoal echo integration and tested species identification by a method of artificial neural network using the acoustic data collected in the East China Sea in March 1994 and in the southern coastal waters of the East Sea of Korea in March 1995. Between areas, frequency distribution of 10 shoal descriptors was different, which showed characteristics of shoal behaviour in size, bathymetric position and acoustic strength. The range and mean of shoal size distribution in length and height was wider and bigger in the southern coastal waters of the East Sea than in the East China Sea. Relative shoal size of China Sea. Fractal dimension of shoal was almost same in both areas. Mean volume reverbration index of shoal was 3 dB higher in the southern coastal waters of the East Sea than in the East China Sea. The depth layer of shoal distribution was related to bottom depth in the southern coastal waters of the East Sea, while it was between near surface and central layer in the East China Sea. Principal component analysis of shoal descriptors showed the correlation between shoal size and acoustic strength which was higher in the southern coastal waters of the East Sea, than in the East China Sea. Correlation was also found among the bathymetric positions of shoal to some degree higher in the southern coastal waters of the East Sea than in the East China Sea. The anchovy shoal of two areas was identified by artificial neural network. The contribution factor index (Cio) of the shoal descriptors between two areas were almost identical feature. The shoal volume reverberation index (Rv) was showed the highest contribution to the species identification, while shoal length and shoal height showed relatively high negative contribution to the species identification.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.341-351
• /
• 2022

During bolted flange assembly, the contact stiffness of some areas of the joint surface may be low due to the elastic interaction. In order to improve the contact stiffness at the lowest position of bolted flange, the correlation model between the initial bolt pre-tightening force and the contact stiffness of bolted flange is established in this paper. According to the stress distribution model of a single bolt, an assumption of uniform local contact stiffness of bolted flange is made. Moreover, the joint surface is divided into the compressive stress region and the elastic interaction region. Based on the fractal contact theory, the relationship model of contact stiffness and contact force of the joint surface is proposed. Considering the elastic interaction coefficient method, the correlation model of the initial bolt pre-tightening force and the contact stiffness of bolted flange is established. This model can be employed to reverse determine the tightening strategy of the bolt group according to working conditions. As a result, this provides a new idea for the digital design of tightening strategy of bolt group for contact stiffness of bolted flange. The tightening strategy of the bolted flange is optimized by using the correlation model of initial bolt pre-tightening force and the contact stiffness of bolted flange. After optimization, the average contact stiffness of the joint surface increased by 5%, and the minimum contact stiffness increased by 6%.

• 한국방사선학회논문지
• /
• 제7권1호
• /
• pp.25-30
• /
• 2013

본 논문은 1998년부터 2011년까지 강릉 지역의 지방 방사능 측정소에서 측정된 공간 감마선량률의 통계 적인 성질을 조사하였다. Autocorrelation Function Analysis(ACF), Rescaled Range Analysis(R/S Analysis), Detrended Fluctuation Analysis(DFA)의 방법들이 사용되었으며, 이 중 DFA는 non-stationary한 시계열의 장거리 상관성을 보여주는 좋은 방법으로 알려져 있다. 우리는 이 연구를 통해 다음의 사실을 알았다. 첫 번째, 공간 감마선량률은 두 가지 다른 경향을 갖는 크로스 오버가 나타난다. 이것은 연중 공간 감마선량률은 강한 장기 기억 특성이 나타나는데 비해 연간으로 넘어가면 상관성이 사라지는 것을 의미한다. 두 번째, 각 분석 방법들의 지수들이 있는데 이 지수들 사이의 관계식이 맞음을 확인 하였다.