• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.38-49
• /
• 1997

In this paper, w describe partitioning large circuits into multiple chips on the programmable FPCB for rapid prototyping. FPCBs consists of areas for FPGAs for logic and interconnect components, and the routing topology among them are predetermined. In the partition problem for FPCBs, the number of wires ofr routing among chips is fixed, which is an additonal constraints to the conventional partition problem. In order to deal with such aconstraint properly we first define a new partition problem, so called the topologybased partition problem, and then propose a heuristic method. The heuristic method is based on the simulated annealing and clustering technique. The multi-level tree clustering technique is used to obtain faster and better prtition results. In the experimental results for several test circuits, the restrictions for FPCB were all satisfied and the needed execution time was about twice the modified K-way partition method for large circuits.

• 기계와재료
• /
• v.22 no.1
• /
• pp.30-35
• /
• 2010

전자부품산업이 빠르게 발전하고 있기 때문에 고기능성 PCB의 수요 또한 많이 늘고 있다. 이러한 PCB는 전자제품의 굴곡성(flexibility) 있는 형태로 발전하여 전자제품의 소형화 및 고밀도화가 가능하고, 반복적인 굴곡에 높은 내구성을 갖는 연성(flexible) PCB(FPCB)의 사용이 증가하고 있으며, 이런 시장의 요구에 맞춰 연성 다층 구조의 FPCB에 대한 정밀 고속 가공 기술에 대한 수요도 급격히 확대되고 있다. 따라서 장비 운영의 효율성 극대화 및 설비 투자를 최소화하고 단일 장비로 절단(half cut, full cut), 제거, 트리밍, 리페어 고정 등을 수행할 수 있는 장비 개발을 위한 스캐너/스테이지 고정밀 제어, Z축 스텝가공, 멀티포인트 비전 인식을 통한 왜곡 최소화 등의 요소기술 개발관련 내용을 소개하고자 한다.

• Journal of the KSME
• /
• v.49 no.12
• /
• pp.60-64
• /
• 2009

이 글에서는 신속한 신뢰성 정보를 얻고자 시험기간을 단축하기 위한 목적으로 실시하는 가속시험인 가속수명시험과 가속열화시험의 정의, 설계 및 시험방법에 대하여 기술하였으며, 사례로서 슬라이드형 휴대폰에 적용되는 FPCB에 대한 가속수명시험법을 소개하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.17-22
• /
• 2013

We investigated the optimum bonding conditions for thermo-compression bonding of electrodes between flexible printed circuit board(FPCB) and rigid printed circuit board(RPCB) with Sn-58Bi solder as interlayer. In order to figure out the optimum bonding conditions, peel test of FPCB/RPCB joint was conducted. The peel strength was affected by the bonding conditions, such as temperature and time. The fracture energies were calculated through F-x (Force-displacement) curve during peel test and the relationships between bonding conditions and fracture behaviors were investigated. The optimum condition for the thermo-compression bonding with Sn-58Bi solder was found to be temperature of $195^{\circ}C$ and time of 7 s.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.31-36
• /
• 2009

In this paper, the laser cutting characteristics of the flexible PCB using high power Nd:YAG UV laser were investigated. A specific FPCB model was selected for the experiment. Test sheets were made, which had equal materials and layer structure to those of the outline (OL) region and the contact pad (CP) region in the FPCB. The experiment is made up of two stages. In the first stage of the experiment, the laser cutting fluence was found, which is the threshold fluence to cut the test sheets completely. The laser cutting fluence of the OL sheet is $1781.26{\sim}1970.16\;J/cm^2$ and that of the CP sheet is $2109.34{\sim}2134.34\;J/cm^2$. In the second stage, cutting performance and its qualities were analyzed by the experiment. The laser cutting performance remained almost unchanged for all laser and process parameter sets. The average cutting width (top side/bottom side) of the OL sheet was $40.45\;{\mu}m/11.52\;{\mu}m$ and that of the CP sheet was $22.14\;{\mu}m/10.93\;{\mu}m$. However, the laser cutting qualities were different according to the parameters. The adjacent region of the cutting line on the OL sheet was carbonized as the beam speed was low and the overlap coefficient was high. The surface quality around the cutting line of the CP sheet was about the same. Carbonization and debris occurred on the surface of the cutting line. As a result of the experiment, the cutting qualities were better as the overlap coefficient was made low and beam speed high. Therefore, the overlap coefficient 2 or 3 is proper for the FPCB laser cutting.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.81-81
• /
• 2010

전자 패키징은 미세화, 경량화, 저가화를 지향하고 신뢰성의 향상을 위해 발전해 왔다. 이러한 경향은 전자부품 자체의 성능 향상 뿐 아니라 전자부품을 장착, 고정할 수 있게 하는 인쇄회로 기판(PCB : Printed Circuit Board)의 성능에 많은 관심을 가지게 되었다. 전기적 신호의 손실을 줄이기 위해 전기, 전자 산업체에서는 가볍고 굴곡성이 우수한 연성인쇄회로기판(FPCB : Flexible PCB)과 가격이 싸고 신뢰성이 입증된 경성인쇄회로기판(RPCB : Rigid PCB)이 그 대상이다. 본 논문에서는 이 PCB중에서도 RPCB와 FPCB간의 열압착 방식으로 접합 시 전극간의 접합 양상을 보았다. 이 열압착 방식은 기존에 PCB를 접합하는데 사용하고 있는 connector를 이용한 체결법을 대체하는 기술로써 솔더를 중간층(interlayer)로 이용하여 열과 압력으로 접합하는 방식이다. 이 방식을 connector를 사용하는 방식에 비해 그 부피가 작고 I/O개수에 크게 영향 받지 않으며 자동화 공정이 쉬운 장점을 가지고 있다. 접합의 대상 중 RPCB의 경우는 무전해 니켈 금도금(ENIG : Electroless Nickle Immersion Gold)로 제작하였으며 FPCB의 경우는 ENIG와 유기보호피막(OSP : Organic solderability preservation) 처리하였다. 실험에 사용한 PCB는 $300\;{\mu}m$ pitch의 미세피치이며 솔더의 조성은 Sn-3.0Ag-0.5Cu (in wt%)과 Sn-3.0Ag (in wt%)를 사용하였다. 접합 온도와 접합 시간 그리고 접합 압력에 따라 최적의 접합 조건을 도출하였다. 접합 강도는 $90^{\circ}$ Peel Test를 통해서 측정하였으며 접합면 및 파괴면은 SEM과 EDS를 통하여 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.92-98
• /
• 2014

In this paper, the reconfigurable frequency selective surface for C-band was designed using patch array and grid structure. Frequency reconfigurability was obtained by varying the capacitance from varactor diode. From the optimized design parameters, we fabricated the reconfigurable frequency selective surface using the FPCB(Flexible Printed Circuit Board) and commercial varactor diode and measured the frequency reconfigurability for different bias voltage. From the measurement results, proposed structure has the wideband operating frequency of 6.6~7.6 GHz. We can applied this proposed structure to the smooth curved surface like as radome of aircraft or warship.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.525-526
• /
• 2013

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.172-174
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.711-712
• /
• 2007