• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2004년도 춘계학술대회 디지털 컨버젼스(Digital Convergence)와 경영혁신
• /
• pp.85-85
• /
• 2004

• 한국컴퓨터산업학회논문지
• /
• 제8권3호
• /
• pp.167-172
• /
• 2007

일반적으로 응용프로그램에서 병렬성 추출에 대한 핵심 부분은 루프이다 따라서 본 논문에서는 Loop Interchange를 자동으로 처리할 수 있는 병렬컴파일러를 구현하고자한다. Loop Interchange는 반복문에서 cedar Fortran의 CDOALL문장을 바깥쪽으로 보냄으로서 특히 더 많은 병렬화 효과를 얻을 수 있기 때문이다. 이는 향후 선형변환과 혼합하여 더욱 효과적인 실행 결과를 기대하고 불완전 중첩루프에 적용하는 방법의 연구에 기여할 것으로 판단된다.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.1-6
• /
• 2005

본 연구에서는 형상기억합금 작동기의 열-기계적 특성과 구조물의 응용을 살펴보았다. Lagoudas 모델을 기본으로 3-D 형상기억합금의 구성방정식을 FORTRAN으로 해석 알고리즘을 만들어 user material(UMAT) subroutine을 개발하였다. 개발된 형상기억합금 해석 UMAT subroutine을 상용 프로그램 ABAQUS와 연계 해석하여 형상기억합금 작동기와 주 구조물간의 상호 특성을 수치적으로 살펴보았다.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.33-38
• /
• 2005

본 연구에서는 팽창형 막 구조물의 대변형 특성을 수치적 그리고 실험적으로 살펴보았다. Miller와 Hedgepeth의 막 이론을 이용하여 주름 효과를 고려한 막재료 구성방정식을 FORTRAN으로 해석 알고리즘을 만들어 user material(UMAT) subroutine을 개발하였다. 개발된 주름 해석 UMAT subroutine을 상용 해석 프로그램 ABAQUS와 연계 해석하여 팽창형 막 구조물의 주름 영역과 변형된 형상 특성 연구를 수행하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권7호
• /
• pp.771-781
• /
• 2006

Car acceleration or deceleration induce the surface slope of liquid fuel in the LNG tank. Slope changes the surface area wetted by liquid fuel in the tank and consequently heat leak to the tank. The Fortran program, 'Pro-Heatleak', is developed to evaluate heat leak on LNG tank. The verification test proves the high accuracy of the developed program. The difference between MathCad and computational results is less than 0.07 %. Computational analyses of heat leak are carried out for 10 gallons and 20 gallons of fuel vapor in the tank. With the increasing of fuel vapor volume by 10 percent the wetted surface area and heat leak respectively decrease by 13 percent. The difference between maximum and minimum heat leak is about 10 percent for both 10 gallons and 20 gallons of fuel vapor in the tank.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.905-915
• /
• 2000

In this article we discuss some aspects of operational Tau Method on delay differential equations and then we apply this method on the differential delay equation defined by $\omega(u)\;=\frac{1}{u}\;for\;1\lequ\leq2$ and $(u\omega(u))'\;=\omega(u-1)\;foru\geq2$, which was introduced by Buchstab. As Khajah et al.[1] applied the Recursive Tau Method on this problem, they had to apply that Method under the Mathematica software to get reasonable accuracy. We present very good results obtained just by applying the Operational Tau Method using a Fortran code. The results show that we can obtain as much accuracy as is allowed by the Fortran compiler and the machine-limitations. The easy applications and reported results concerning the Operational Tau are again confirming the numerical capabilities of this Method to handle problems in different applications.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.119-132
• /
• 1990

To design protection coordination for an electric power distribution system, an expert system is developed, using both the veteran expert's heuristics and the guide book for the distribution facility operation considering feeder configuration, service route, load characteristics fault current and load current. The expert system developed in this papaer determines the type of protective device(clearing current and sequence). The location and rating change of protective device in the old feeder is realized by using old database. Current(T-C) curves of various kinds of protective devices are stored in Knowledge Base (KB). The expert system is developed on a 32 bit personal computer using PROLOG, AutoCAD,dBASEIIIPLUS and FORTRAN. To compute the fault current and loadflow, FORTRAN is used.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.54-61
• /
• 2005

A simulator for virtual laser machining is developed to help understanding and predicting the effects of machining parameters on the final machined results. Main program is based on the model for polymer ablation with short pulse excimer lasers. Version f of the simulator is built using Visual Fortran to make the user work under visual environment such as Windows on PC, where the important machining parameters can be input via dialog box and the calculated results for machined shape, beam fluence, and temperature distribution can be plotted through the 2-D graphics windows. Version II of the simulator is built using HTML, CGI and JAVA languages, allowing the user to control the input parameters and to see the results plot through the internet.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.41-49
• /
• 1999

In general, FORTRAN is used for numerical analysis and OPS5 or LISP is used for expert systems, This causes problems at the interface because the various applications require different computing languages or environments. This paper describes the approach used to take AutoCAD as a user-interface for an existing finite element structural analysis package. Some principles concerning database management related to data-exchange interface of pre- and post-processing system for FORTRAN structural analysis program are discussed, and numerical examples demonstrate the power of the combination of these programs.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.38-42
• /
• 2007

본 연구에서는, 다분야 통합 해석을 이용한 순항미사일 형상 최적설계를 수행하였다. FORTRAN을 이용하여 개발한 공력, 중량, 성능 및 임무 해석 모듈을 프레임워크를 통하여 통합하였으며 최적화를 위하여 전역최적화 도구인 다윈 알고리즘을 사용하였다. 최적설계 결과, 다른 설계 구속조건을 만족시키면서 17% 가량 전체 무게를 줄일 수 있었다.