• 한국운동역학회지
• /
• 제22권3호
• /
• pp.277-284
• /
• 2012

The purpose of this study was to find out the changes in beginners' batting movements after taking undergraduate baseball lectures, by comparing and analyzing the speed of bat, the angle of body and its segments, the angular velocity and so on. For this purpose, the author picked up five undergraduates who had not taken baseball lectures, and conducted three-dimension computerized tomography twice on them, that is, before and after taking baseball classes, with eight infrared cameras and two force platforms. The conclusions are, first, the time required for swing was shortened after taking the classes. Second, the maximum velocity of the bat-end was increased. Third, at the time of impact, while the rotation angles of the pelvis and the tip of left foot were increased, the left elbow had more flexion after the classes. Fourth, the size of ground reaction force was increased at the point of swing where the ground reaction force of left foot became maximized. As we can infer from these conclusions, beginners' hitting movements before taking baseball classes tended to swing only with the arms, without waist rotation and weight shift of the lower body, but after the classes, their movements were proved to be corrected into the swing using the lower body. For the future studies, the author expects a research in a close to real environment by using pitching machine.

• 한국운동역학회지
• /
• 제19권4호
• /
• pp.749-759
• /
• 2009

본 연구는 정구 남자 국가대표 전위선수 4명($33.3{\pm}2.16$세)을 대상으로 포핸드 미들발리에 대한 운동학적, 운동역학적 분석을 통하여 기초 자료를 제공하는데 있다. 분석결과, 스윙시간은 1구간이 64.7%로 가장 길게 나타났고, 인체중심의 이동변위는 1구간에서 오른쪽으로 48.1%, 전방으로 54.4%를 차지하였다. 임팩트 시 팔꿈치 관절의 속도와 상완분절의 각속도에서 각각 평균 3.67m/s와 201deg/s로 가장 빠르게 나타났으며, 이는 네트 위에서 임팩트 되도록 하기 위해 팔을 빠르게 신전시켰기 때문이라 사료된다. 이때의 팔꿈치 각도와 볼 속도는 각각 평균 $149^{\circ}$와 18.9m/s이였다. 지면반력에 있어서 왼발과 오른발의 X와 Y방향의 분력에서 통계적으로 유의한 차이가 나타났으며, 이는 왼발이 오른쪽으로 밀 때 오른발은 그 힘에 대칭적으로 비례하여 왼쪽 방향으로 지지대 역할을 한 것으로 사료된다.

• 대한족부족관절학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 2023

Purpose: Toe-in gait is defined as a style of walking in which the foot turns inward. It may be caused by an increase in femoral bone anteversion, tibia torsion, and metatarsus adductus. There are some conservative treatment approaches used to correct this condition. This review aimed to determine the effects of the toe-in gait on joint loading, kinematics, and kinetic parameters while walking. Moreover, it sought to determine the efficiency of various conservative treatments used to correct the condition. Materials and Methods: A literature search was conducted in the following databases: PubMed, Institute for Scientific Information (ISI), Web of Science database, EBSCO, and Embase, using the following keywords in toe, toe-in, toeing, in-toe, pigeon toe, and conservative treatment published between 1950 and 2021. The quality of the studies was evaluated using the Down and Black tool. Results: A total of 13 papers on the impact of toe-in gait on joint contact force, kinematics, kinetic parameters, and conservative approaches to management were found. The quality of the studies varied between a score of 11 and 22. The toe-in gait influences the joint contact forces and kinematics of the joints, especially the hip and pelvis. The effects of conservative treatment on the toe-in gait appear to be controversial. Conclusion: As the toe-in gait influences the joint contact force, it may increase the incidence of degenerative joint diseases. Therefore, treatment is recommended. However, there is no strong evidence on the efficacy of conservative treatments, and there are no recommendations for the use of these treatments in subjects with toe-in gait.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.89-95
• /
• 2015

In this paper, we propose the method and development of custom-made golf insole recommender system to optimize the foot balance during golf swing. This system development procedures are as follows : (1) Using the measured data of the golf swing, the analysis of the individual golf hitting and balance will be done. (2) Based on the analysis results, the system will recommend the golf custom-made insole to optimize the individual balance using recommender algorithm. (3) After the golf custom-made insole is recommended, the modeling and design of the recommended insole is processed. Golf custom-made insole will be possible to reduce the excessive shaking and increase the lower-body supporting force. Therefore, we have expected that the recommended insole will improve the swing results through the optimization of golf swing balance. In the future, it is necessary to secure the higher validity and reliability through the more diverse experiments and research.

• 센서학회지
• /
• 제26권5호
• /
• pp.353-359
• /
• 2017

This paper describes the design and manufacture of a ankle two-axis force sensor of a walking assist robot for hemiplegic leg patient. The walking assist robot for the hemiplegic leg patient can safely control the robot by detecting whether the foot wearing the walking assist robot is in contact with the obstacle or not. To do so, a two-axis force sensor should be attached to the robot's ankle. The sensor is used to measure the force of a patient's ankle lower part. The two-axis force sensor is composed of a Fx force sensor, a Fy force sensor and a pulley, and they detect the x and y direction forces, respectively. The two-axis force sensor was designed using by FEM(Finite Element Method), and manufactured using by strain-gages. The characteristics experiment of the two-axis force sensor was carried out respectively. The test results indicated that the interference error of the two-axis force sensor was less than 1.2%, the repeatability error and the non-linearity of the two-axis force sensor was less than 0.04% respectively. Therefore, the fabricated two-axis force sensor can be used to measure the force of ankle lower part in the walking assist robot.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1974-1981
• /
• 2004

This paper is concerned with the numerical investigation of the transfer characteristics of the landing impact force exerted on court sport shoes to the sport surface condition. The reaction force occurred by the impact between court sport shoes and sport surface is absorbed by shoes to some extent, but the remaining impact force is to transfer the human body from the sole of a foot. We consider four surface conditions, asphalt, urethane, clay and wood court surfaces. For the dynamic response analysis, we construct a coupled leg-shoes FEM model and create the multi-layered composite surface model. The numerical simulations are performed by an explicit nonlinear finite element method. Through the numerical experiments, we examine the transfer characteristics of the landing impact force to the surface condition.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.178-180
• /
• 1994

We developed a prototype force plate equipped with five load cells, a 12-bit analog-to-digital converter and three integrated circuits. The force plate displays the center of foot pressure, the magnitude and two (vertical and anterior-posterior) directions of the ground reaction force on a personal computer monitor. Although the force plate data are valid only for two directions, it can be a preliminary version of a more versatile 3 dimensional force plate in terms of the resolution and reliability.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.231-241
• /
• 2011

The purpose of this study was to analyze the distribution of foot pressure generated by active materials of a functional insole. Comfort is an important consideration while selectingfootwear and insoles. Consequently, it has an influence on injury. The development of new materials for functional insoles is considered one of the more important points for their manufacture. The method adopted in this study is as follows. First, ten healthy males were selected as subjects for the study. Each subject's foof was pre-screened podoscope(Alfoots, Korea) to check for the presence of any foot abnormalities, Two kinds of equipment were used for the study: a foot pressure device from Pedar-X, Germany, and a treadmill from Pulsefitness, UK. Next, each subject was asked to test four types of insoles(insoles of outdoor shoes, indoor shoes, walking shoes, and sports shoes) via walking trials on the treadmill at a constant speed of 4.2 km/h. The pressure distribution data(contact area, maximum force, maximum peak pressure, and maximum mean pressure) was collected using the pressure device at a sampling rate of 100 Hz. Results of the tests showed that all four types of functional insoles increased contact areas whit the foot. Further, functional insoles of walking shoes and sport shoes decreased the foot pressure. From these results, we conclude that the active materials of functional insoles of shoes can increase the contact area and provide greater comfort.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.131-136
• /
• 2007

In this study, we developed an active ankle-foot orthosis(AAFO) which can control dorsi/ plantar flexion of the ankle joint to prevent foot drop and toe drag during walking. 3D gait analyses were performed on five healthy subjects under three different gait conditions: the normal gait without AFO, the SAFO gait with the conventional plastic AFO, and the AAFO gait with the developed AFO. As a result, the developed AAFO preeminently induced the normal gait compared to the SAFO. Additionally, AAFO prevented foot drop by proper plantarflexion during loading response and provided enough plantarflexion moment as a driving force to walk forward by sufficient push-off during pre-swing. AAFO also could prevent toe drag by proper dorsiflexion during swing phase. These results indicate that the developed AAFO may have more clinical benefits to treat foot drop and toe drag, compared to conventional AFOs, and also may be useful in patients with other orthotic devices.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.25-29
• /
• 2011

The purpose of this study was to analyze quantitative and qualitative differences according to shoe type for the grand jete landing in ballet. The subjects for this study were 9 female ballet majors with an average of 12 years of experience. Subjects jumped, performing a front split, and landed on 1 foot, a movement called the grand jete. Analysis was performed on the students' landing. Independent variables were 3 shoe types: split sole, traditional out sole, and 5-toed forefoot shoes, with bare feet as a control group. Dependent variables were vertical passive ground reaction force and qualitative elements. Passive ground reaction force variables(maximum passive peak value, number of passive peaks, passive force-time integral, and center of pressure) were measured by the Kistler 9281B Force Platform. Qualitative elements were comfort, cushioning, pain, and fit. Statistical analysis included both 1-way ANOVA and Tukey's test for follow-up. Finalized data demonstrated that the 5-toed forefoot shoe allows the forefoot to expand and the toes to individually press down upon landing, increasing foot contact with the surface. Five-toed forefoot shoes minimize passive peaks and pain, while increasing comfort, cushioning, and fit. Most ballet movements are composed of jumping, balancing, landing, and spinning. Wearing 5-toed forefoot shoes allows for a natural range of movement in each toe, to improve both technique and balance. Pain and injuries from ballet can be minimized by wearing the correct shoe type. According to this analysis, it is possible to customized ballet shoes to increase the efficiency of techniques and movements.