• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.21-33
• /
• 1997

In this paper, a method of self-organizing for fuzzy logic controller(FLC) through learning of the proper direction of coritrol is proposed. In case of designing a self-organizing FLC for unknown dynamic plants based on the gradient descent method, it is difficult to identify the desirable direction of the change of control inpul. in which the error would be decreased. To resolve this problem, we propose a method as fo1lows:at first, assign representative values for the direction of change of error with respect to control input to each partitioned region of the states, and then, learn the fuzzy control rules using the reinforced representative values through iterative trials. 'The proposed self-organizing FLC has simple structure and it is easy to design. The validity of the proposed method is proved by the computer simulation for an inverted pendulum system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.3
• /
• pp.9-15
• /
• 1998

This paper presents an adaptive learning control method for unknown nonlinear systems by combining neuro control and iterative learning control techniques. In the present control system, an iterative learning controller (ILC) is used for a process of short term memory involved in a temporary adaptive and learning manipulation and a short term storage of a specific temporary action. The learning gain of the iterative learning law is estimated by using a neural network for an unknown system except relative degrees. The control informations obtained by ILC are transferred to a long term memory-based feedforward neuro controller (FNC) and accumulated in it in addition to the previously stored infonnations. This scheme is applied to a two link robot manipulator through simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.99-106
• /
• 2001

In this paper, an 1-Watt amplifier for IMT-2000 was designed and fabricated using feedfarward method which has the highest linearity and wide bandwidth. Since feedforward is sensitive to surroundings for example heat, input power level, time and so on, adaptive controller using micro controller is adopted. We fabricated a HPA with 35 dB gain, 40 dBm of 1-dB compression point, and utilized variable attenuator and variable phase shifter using reflection type to cancel loop signal. From the measured results, the fo11owing facts were obtained, in signal loop, main carrier over 35 dB was suppressed and error signal over 30 dB is cancelled in error loop, IMD characteristics above 60 dBc were obtained.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.194-198
• /
• 1998

A novel fuzzy basis function vector- based adaptive control approach for Multi-input and Multi-output(MIMO) system is presented in this paper, in which the nonlinear plants is first linearised, the fuzzy basis function vector is then introduced to adaptively learn the upper bound of the system uncertainty vector, and its output is used as the paramenters of the compensator in the sense that both the robustness and the asymptotic error convergence can be obtained for the closed loop nonlinear control system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3446-3450
• /
• 2010

This study aims to make class lighting that gives classroom to stability and activity. For the purpose, we develop a emotional lighting LED using LED source which is a environment-friendly and the lighting fo the next generation. We composed emotional lighting LED as controller for color conversion, power supply for supplying LED lamp a stable power, PCB board for LED lamp and lamp and case. We developed designed emotional lighting LED and proved that the system works and one can get intended color.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.428-433
• /
• 1994

This investigates the feasibility of applying fuzzy ogic controllers to the motion tracking control of a direct drive robot manipulator to deal with highly nonlinear and time-varying dynamics associated with robot motion. A fuzzy logic controller with narrow shape of membership functions near zero and wide shape far away zero is analyzed. Simulation and experimental studies have been conducted for a 2 degree of freedom direct drive SCARA robot to evaluate control performances, Fuzzy logic controllers have shown control performances that are often better, or at least, as good as those of conventional PID controllers. Furthermore, the control performance of fuzzy logic controllers can be improved by selecting membership functions of narrow shapes near zero and wide shapes far away zero.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.40-47
• /
• 2001

In this pater, the QLQG/LTR control method is applied for the position control of the nonlinear timing belt driving sys-tem. Parameters fo the plant are identified by genetic algorithm and nonlinear elements, such as Coulomb friction and dead-zone, and quasi-linearized by RIDE method. Comparing with the LQG/LTR contro. the QLQG/LTR has similar structures of the LQG/LTR, but this method can consider nonlinear effects in designing the controller. Thus, the QLQG/LTR control system is robust to hard nonlinearities such as Coulomb friction, dead-zone, etc. Forma given hard non-linear system through experiments, it is shown that the tracking performance of the QLQG/LTR control system can be very improved that the LQF/LTR control system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.131-144
• /
• 1995

This paper presetns modifications of a hydraulic shovel to robotize, and we derive a dynamic model of the hydraulic shovel arms,and hydraulic analysis are discussed . Then , our purpose is making to imitate a target railroad line of the grinder position by the PID control. Moreover, to determine the gains of the PId controller, we referenced the Ziegler and Nichols' method. In this paper, we demonstrated that the PID control is available for system. These results indicated the possibility of practical use fo the deburring robot with the hydraulic shovel.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.65-71
• /
• 2001

The step response of the Manabe standard form[2] has little overshoot and show almost same waveforms regardless of the order of the characteristic polynomials. In some situations it is difficult to control the rise time and settling time simultaneously of the step response of the Manabe standard form To control its rise time and settling time efficiently, We develop the Manabe standard form: We try to find out the SRFS(Slow Rise time & Fast Setting time) form which has the slower rise time and faster settling time than those fo the Manabe standard form. We also consider the other three forms: FRSS(Fast Rise time & Slow Settling time), SRFS(Slow Rise time & Fast Settling time) and SRSS(Slow Rise time & Slow Settling time) forms. In this paper, by using the evolutionary strategy, we obtain all the coefficient of the four forms we mention above. Finally, we design a controller for a given plant so that the overall system has the performance that the rise time is faster, the settling time is faster than those of the Manabe standard form.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3079-3094
• /
• 1996

Recently, the high-precision vibration attenuation technology becomes the essence fo the seccessful development of high-integrated and ultra-precision industries, and is expected to continue playing a key role in the enhancement of manufacturing technology. Vibration isolation system using an air-spring is widely employed owing to its excellent isolation characteristics in a wide frequency range. It has, however, some drawbacks such as low-stiffness and low-damping features and can be easily excited by exogenous disturbances, and then vibration of table is remained for a long time. Consequently, the need for active vibration control for an air-spring vibration isolation system becomes inevitable. Furthermore, for an air-spring isolation table to be successfully employed in a variety of manufacturing sites, it should have a guaranteed robust performance not only to exogenous disturbances but also to uncertainties due to various equipments which might be put on the table. In this study, an active vibration suppression control system using H.inf. theory is designed and experiments are performed to verify its robust performance. An air-spring vibration isolation table with voice-coil-motors as its actuators is designed and built. The table is modeled as 3 degree-of-freedom system. An active control system is designed based on $H_\infty$control theory using frequency-shaped weighting functions. Analysis on its performance and frequency responce properties are done through numerical simulations. Robust characteristics of$H_\infty$ control on disturbances and model uncertainties are experimentally verified through (i) the transient response to the impact excitation of the table, (ii) the steady-state response to the harmonic excitation, and (iii) the response to the mass change of the table itself. An LQG controller is also designed and its performance is compared with the $H_\infty$ controller.