• 한국자기학회지
• /
• 제9권2호
• /
• pp.85-90
• /
• 1999

LPE(liquid phase epitaxy)방법으로 제작한 YIG박막의 정자파 모드를 연구하기 위해서 강자성공명 실험을 하였다. 시편면과 오부자기장이 평행할 때 주기적인 신호로 나타나는 정자표면파와 정자역체적파 모드를 관측하였으나 서로 수직할 때는 복잡한 신호를 관측하였다. 평행할 때 관측한 정자파 모드를 Walker와 Damon-Eshbach이론으로 분석한 결과 잘 설명되었다. 관측된 정자파 모드의 선폭은 0.4Oe이었고, 이론으로 분석할 때 구한 포화자화는 137emu/㎤이었다. 또한 시편의 포화자화 값의 변화와 두께의 변화에 따른 모드들의 변화를 알아보기 위하여 정자역체적파의 (1, 1)과 (3, 1)모드를 계산하고 서로 비교하였다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.608-615
• /
• 2022

Construction projects are large-scale projects that require extensive construction costs and resources. Especially, scheduling is considered as one of the essential issues for project success. However, the schedule and resource management are challenging to conduct in high-tech construction projects including complex design of MEP and architectural finishing which has to be constructed within a limited workspace and duration. In order to deal with such a problem, this study suggests resource and sequence optimization using constraint programming in construction projects. The optimization model consists of two modules. The first module is the data structure of the schedule model, which consists of parameters for optimization such as labor, task, workspace, and the work interference rate. The second module is the optimization module, which is for optimizing resources and sequences based on Constraint Programming (CP) methodology. For model validation, actual data of plumbing works were collected from a construction project using a five-minute rate (FMR) method. By comparing actual data and optimized results, this study shows the possibility of reducing the duration of plumbing works in construction projects. This study shows decreased overall project duration by eliminating work interference by optimizing resources and sequences within limited workspaces.

• Journal of Genetic Medicine
• /
• 제11권1호
• /
• pp.16-21
• /
• 2014

A 31-year-old woman, who was pregnant with twins, underwent chorionic villus sampling because of increased nuchal translucency in one of the fetuses. Cytogenetic analysis showed a normal karyotype in the fetus with increased nuchal translucency. However, the other fetus, with normal nuchal translucency, had a derivative X chromosome (der(X)). For further analysis, fluorescence in situ hybridization (FISH) and additional molecular studies including fragile X analysis were performed. FISH analysis confirmed that the Y chromosome was the origin of extra segment of the der(X). The X-chromosome breakpoint was determined to be at Xq27 by FMR1 CGG repeat analysis, and the Y-chromosome breakpoint was determined to be at Yq11.23 by the Y chromosome microdeletion study. To predict the fetal outcome, the X-inactivation pattern was examined, and it revealed non-random X inactivation of the der(X). To the best of our knowledge, the identification of an unbalanced Xq;Yq translocation at prenatal diagnosis has never been reported. This study was performed to identify precise breakpoints and the X-inactivation pattern as well as to provide the parents with appropriate genetic counseling.

• 한국재료학회지
• /
• 제5권8호
• /
• pp.1040-1044
• /
• 1995

Sm의 농도가 각각 0.3, 0.4, 0.6인 세종류인(YSmLuCa)$_3$(FeGe)$_{5}$ $O_{12}$ 가넷트 박막을 LPE법으로 비자성재료인 Gd$_3$Ga$_{5}$ $O_{12}$(GGG)기판상에 성장시켜, 버블 자성재료의 자기적 성질을 조사하였다. 공명폭 ΔH는 4$\pi$Ms의 증가에 따라 증가하였고 Sm 농도의 감소에 따라 감소한다. 수직 자기 이방성에너지 Ku는 Sm증가에 따라 증가하며 같은 Sm농도에서는 4$\pi$Ms의 증가에 따라 증가한다. 자벽 이동도는 4$\pi$Ms의 증가에 따라 증가하며 Sm의 증가에 따라 감소한다. Ms.ΔH의 곱이 일정한 사실로 부터 새로운 자기손실인자 Eι을 구할 수 있으며 이는 Sm의 농도에 의존한다.ι을 구할 수 있으며 이는 Sm의 농도에 의존한다.

• Journal of Magnetics
• /
• 제4권1호
• /
• pp.33-37
• /
• 1999

Unidirectional magnetic anisotropy field ($H_an$) was investigated for thin films of $CdCr{2-2x}In_{2X}Se_4 (0$\leq$x$\leq$0.2). This anisotropy originates from the microscopic anisotropic Dzyaloshinskii-Moriya (DM) interaction which arise from the spin-orbit scattering of the conduction electrons by the nonmagnetic impurities. This interaction maintains the remanent magnetization in the direction of the initial applied field. Then the single easy direction of the magnetization is parallel to the direction of the magnetic field. The anisotropy produced by field cooling is unidirectional I.e. the spins system deeps some memory of the cooling field direction. The chalcogenide spinel of$ CdCr_{2-2x}In){2X}Se_4$belongs to the class of the magnetic semiconductors. The magnetic disordered state is obtained when ferromagnetic structure is diluted by In. Then we have the mixed phase characterised by coexistence the magnetic long range ordering (IFN-infinite ferromagnetic network) and the spin glass order (Fc-finite clusters). The total magnetic anisotropy energy depends on the state of magnetic ordering. In our study we concentrated on the magnetic state with reentrant transition and spin glass state. The polycrystalline $ CdCr_{2-2x}In){2X}Se_4$ thin films were obtained by rf sputtering technique. We applied the ferromagnetic resonance (FMR) and M-H loop techniques for determining the temperature composition dependencies of Han. From the experimental data, we have found that Han decreases almost linearly when temperature is increased and in the low temperature is about three times bigger at SG state with comparison to the state with REE.

• 한국자기학회지
• /
• 제13권6호
• /
• pp.221-225
• /
• 2003

통상적인 rf 스파터 장비와 YIG 타켓으로 수 $\mu\textrm{m}$의 Fe-Y-O 비정질상을 Ga-Gd Garnet(GGG) (111) 기판위에 만든 다음 550-105$0^{\circ}C$의 온도에서 대기 중 열처리할 때 열처리온도가 결정특성과 자기특성에 미치는 영향을 조사하였다 .Fe-Y-O 비정질상의 결정화온도는 졸-겔 분말의 결정화온도보다 훨씬 낮은 600-$650^{\circ}C$이었으며, $650^{\circ}C$ 이상에서 열처리하면 YIG(888)면의 피크의 강도는 GGG(888) 면 회절강도의 80%정도이고 YIG(888)면의 록킹곡선의 반가폭도 0.14$^{\circ}$보다 작아 YIG박막의 우수한 에피택시성장을 확인하였다. 열처리온도가 높을 경우 격자상수가 작아지면서 YIG(888)면의 회절선이 강해지고 좁아져서 높은 온도가 YIG박막의 고상에피택시성장에 유리하였으며 이것은 자화곡선에서도 확인되었다. 또한 높은 온도에서 열처리된 박막에서 수직이방성이 유도되었으며 이것은 기판과 박막의 0.15%의 격자불일치 때문에 생기는 것이다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 자성 및 자성재료 국제학술대회
• /
• pp.7-8
• /
• 2011

Although yttrium iron garnet (YIG) has provided a great vehicle for the study of spin waves in the past, associated difficulties in film deposition and device fabrication using YIG had limited the applicability of spin waves to practical devices. However, microfabrication techniques have made it possible to characterize both the resonant as well as the travelling characteristics of spin waves in permalloy (Py). A variety of methods have been used for measuring spin waves, including Brillouin light scattering (BLS), magneto-optic Kerr effect (MOKE), vector network analyzer ferromagnetic resonance (VNA-FMR), and pulse inductive microwave magnetometry (PIMM). PIMM is one of the most preferred methodologies of measuring travelling spin waves. In this method, an electrical impulse is applied at one of two coplanar waveguides patterned on top of oxide-insulated Py, producing a local disturbance in the magnetization of the Py. The resulting disturbance travels down the Py in the form of waves, and is inductively picked up by the other coplanar waveguide. We investigate the effect of the pulse width of excitation pulses on the generated spin wave packets using both experimental results and micromagnetic simulations. We show that spin wave packets generated from electrical pulses are a superposition of two separate spin wave packets, one generated from the rising edge and the other from the falling edge, which interfere either constructively or destructively with one another, depending upon the magnitude and direction of the field bias conditions. A method of spin wave amplitude modulation is also presented by the linear superposition of spin waves. We use interfering spin waves resulting from two closely spaced voltage impulses for the modulation of the magnitude of the resultant spin wave packets.

• 국제학술발표논문집
• /
• The 10th International Conference on Construction Engineering and Project Management
• /
• pp.957-964
• /
• 2024

Universities own several campuses and many buildings within the campuses. During the operation & maintenance phase, some of the buildings have architectural components and MEPFs that must be maintained. In the authors' study, university campus Facility Manager uses paper drawings and paper documents for operations and maintenance of MEPFs, and building components, which are managed by human power. In this study, As-Built 3D model of school buildings, was developed by 3D scanning with MatterPort Pro2 camera. A digital twin of the school building was developed from integrating the As-Built 3D model with a COBie Sheet information that defines the building and facility components for FMr. This developed digital twin was used to verify the efficiency of conventional Facility Management (FM) operations. The specific procedures are as follows. (1) Conducted an interview survey on FM of conventional university campuses to organize the current operations. (2) The following building items, which are annual inspection items, were extracted from the conventional FM operations being performed, Speakers, fire alarms, fire doors, guide lights, air conditioning, and fire extinguishing equipment. (3) Since these items listed above are currently documented in different formats, the authors organized them into a database using COBie format. (4) The components of the organized COBie format and the As-Built 3Dmodel were integrated to complete the digital twin. (5) To verify the effectiveness of the digital twin, experiments were conducted on information search in current FM operations and workflows using the digital twin. (6) We also verified the effectiveness of the AS-Built 3D model by comparing between the As-Built 3D model and the BIM model. Finally, we discussed how process innovation through digitalization of FM operations contributes not only to the improvement of daily operations, but also to the productivity improvement of university management.