• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.86-92
• /
• 2011

ITS(Intelligent Transport System) has been researched actively to guarantee the smooth traffic and the safety of the vehicle. In recent, as the sensor for the measurement of distance between vehicles, the FMCW radar system in millimeter wave band has been interested in ITS. Actually, 47, 60, 77, 94 and 139 GHz have been assigned for the vehicle radar frequencies in Europe and Japan. However, the performances of the FMCW radar are deteriorated due to the interferences from the surrounding radars and mobile devices. In this paper, in order to model and simulate the performance of FMCW radar under the exterior interference, we propose a new performance parameter, RER(Radius Error Rate), which contains the information of the range error due to the interferences, and show the effectiveness of the proposed parameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1130-1141
• /
• 2015

Conventionally, a pulse radar is used for middle-sized or large-sized ships to detect other ships or obstacles located at a long distance. However, it is hardly equipped for most of the small-sized ships due to mounting and maintenance costs. Therefore, FMCW(frequency modulated continuous wave) radar is suggested as an alternative for the small-sized ships. Since it operates with low power and has good range resolution for relatively close objects, it is eligible for the small-sized ships. In previously proposed FMCW radar system, it only estimates distance and velocity of a target ship placed in the direction of main beam and is hard to detect several ships simultaneously. Thus, we suggest the method for detecting several ships at the same time by applying MUSIC(multiple signal classification) algorithm to FMCW radar signal received by a phased array antenna. In addition, by combining digital beam forming with the MUSIC algorithm, better angle resolution is achievable.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2014

In this paper, we have implemented an FMCW radar for a near distance measurement. In the structure of the FMCW radar, it is a key problem to solve the VCO nonlinearity. In this work, we have adopted a VCO nonlinearity compensation algorithm using the spectrum correlation of beat signals. The radar experimented in this work uses an X-band(9.55~10.25GHz) microwave signal, and realizes precision of 3% in the range of 30m. The prototype can be applied to the front surveillance radar such as in vehicle anti-collision and probing robot mission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.684-685
• /
• 2017

FMCW radar, which is widely used as a front collision warning system for vehicles, is now being commercialized. In this study we develope the radar signal processing system using MPC5775K that is specialized for high performance ADAS. That has special features for ADAS such as 10Msps 12bit ADC, 50MHz Radix-4 FFT, CTE(Cross Triggering Engine) for synchronized triggering between DAC and ADC. The baseband processing board is implemented and shows the result in Matlab.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2628-2635
• /
• 2010

This paper analyzes the detection probability of FMCW (Frequency Modulated Continuous Wave) radar based on Doppler frequency and analog-digital converter bit and designs and implements signal processing part of FMCW radar. For performance evaluation, the FMCW radar system consists of a transmitted part and a received part and uses AWGN channel. The system model is verified through analysis and simulation. Frequency offset occurs in the received part caused by the mismatching between the received signal and the reference signal. In case of Doppler frequency less than about 38KHz, performance degradation of detection does not occur in FMCW radar with 75cm resolution The analog-digital converter needs at least 6 bit in order not to degrade the detection probability. And, we design and implement digital signal processing part based on DDS chip of digital transmitted signal generator for FMCW radar.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.939-942
• /
• 2000

본 논문에서는 차량 충돌 방지 시스템으로 많이 사용되고 있는 밀리미터파를 이용한 FMCW(Frequency Modulated Continuous Wave) 레이더의 신호 처리부를 분석 및 설계하였고, 설계한 레이더의 파라미터 값들을 이용하여 선행 차량의 거리와 속도 정보를 검출하는 신호 처리 과정을 시뮬레이션 해 보았다. 최종적으로 FMCW 레이더의 신호 처리부를 TI사의 TMS320C31 DSP을 이용하여 하드웨어로 구현하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1565-1571
• /
• 2010

FMCW(Frequency Modulation Continuous Wave) Radar is very useful for vehicle collision warning system because of the simplicity. In this work, a signal processing part of FMCW vehicle radar system is implemented with flexibility using DSP, FPGA, ADC, and DAC so that the system could adopt lots of algorithm and could be improved through road test. It is shown that the system meets basic requirements as designed, and finds some problems in road test. We briefly discuss the problem which are caused by shadow effect from overlapped target and the distortion of beat frequency from the nonlinearity of VCO and the RCS of vehicle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.899-905
• /
• 2012

Level Gauge using FMCW Radar is widely used and researched in many areas because of contactless, long range and flexibility. However FMCW level gauge requires wideband RF bandwidth for archiving high resolution of cm grade. In this paper we propose a new tx sawtooth waveform and processing algorithm with narrowband RF for wideband performance. The proposed method is based on STFT(Short-time fourier transform) and single sinusoidal carrier estimation method. From some experiments, we show that the resolution is improved upto 8 times with 300MHz FMCW radar.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.349-350
• /
• 2023

본 논문에서는 FMCW(Frequency Modulated Continuous Wave) 레이더를 사용하여 재난 상황에서 누워 있는 사람의 다양한 각도의 자세를 통해 사람의 상태를 파악하거나 위치를 추정하고자하였다. 사람의 세 가지 누운 자세 데이터를 전처리하고 이미지로 변환한 데이터를 CNN(Convolutional Neural Network) 1D 모델로 학습시켜 누운 자세를 다양한 각도에서 구별할 수 있는지 분석하여 확인하고자하였으며, 분석 결과 CNN 1D 모델은 99.27%의 정확도를 보였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.341-342
• /
• 2022

본 논문에서는 실내 재난 상황에서 재실자의 위치를 판단하기 위한 Frequency Modulated Continuous Wave(FMCW) 레이더 시스템의 정확도 향상을 위한 Generative Adversarial Networks(GAN) 기반의 신호 보간법을 제안한다. 제안된 실내 위치 추정 시스템은 딥러닝 학습 생성 모델을 활용하게 되는데, 학습을 위한 데이터의 수집이 용이하지 않아 부족하게 되는 학습데이터를 GAN 기법을 통해 확보하고자한다.