• Journal of Environmental Science International
• /
• v.2 no.2
• /
• pp.135-144
• /
• 1993

The purpose of this experimental research was focused to improve the quality of the effluent and the yielded sludge when the papermill wastewater was treated by the indirect aerated submerged biofilter as a second treatment method of papermill wastewater. Changing the various experimental factors (Nutrient additions or not, HRT, Fh ratio, recirculation ratio, etc) with indirect aerated submerged biofilter, the results are as follows. 1) because of the microbes concentration could be sustained to 9, oho man in submerged biofilter and then the volumetric organic loads could be increased to 2.7 kg-BOD/$m^3$<\TEX>/day, the reactor volume can be reduced. 2) Because of the yield coefficient(Y) and the endogenous decay coefficient(kd) were revealed 0.4 and 0.07/d, the yielded sludge volume was reduced. 3) The concentration of the sloughed sludge in the reactor was 2.62~4.01 %, so the thickener could be omited in the papermill wastewater sludge treatment process. 4) When the operating was conducted at HRT of 4hrs, the treatment efficiencies of BOD and COD were obtained 80% and 70%. 5) The range of the theoretical recirculation ratios of this reactor was 14~26. According to those ratios, at the low loads ( BOD volumetric loads is less than 0.79 kg-BOD/$m^3$<\TEX>/day, FM ratio is less than 2.0/d) the results were fitted to the theoretical recirculation ratios (14 ~26) and at the high loads the efficiency were increased to the rise of recirculation ratios.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.44-49
• /
• 2001

In this paper, we propose a new technique to compensate for the VCO nonlinearity using only the returned beat signal whose spectrum contains the internal reflections and the targets simultaneously. In the case of a distance measurement system using single antenna, the reflections from the circulator and the antenna are much larger than the return signal from target. The beat signal by these reflections is at much lower frequency than that of the target, and the VCO nonlinearity can be compensated for using these signals. Indoor experiments were carried out and the results show marked improvement in the shape of range profile and the range resolution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.124-124
• /
• 2023

본 연구에서는 태풍의 이동속도(TS), 상륙각도(LA) 및 연안 지형이 최대 해일고(MSH)에 미치는 복합적인 효과를 분석하기 위해, 이상적인 시나리오와 실제 규모의 사상에 대한 수치모의를 수행였으며. 이를 통해 태풍 진행시 연안을 따라 분포하는 최대 해일고의 일반적 특성을 도출하고자 한다. Delft3D-FM의 2차원 모델을 사용하여 수치모의를 진행하였으며, 모델 도메인은 태풍의 상륙 지점을 연안 중심에 위치시켜고 16km에서 1km까지 다중 해상도 격자로 구성하였다. 가상의 태풍은 다양한 TS와 LA 조건에 따라 생성되었고, TS는 기존의 태풍 사상들의 특성을 통계적으로 분석하여 유의한 범위에서 변화하도록 설정하는 반면, LA의 경우 0도에서 180도까지 15도 간격으로 변화시켰다. 또한, 연안형상과 해저 지형도 다양한 형태를 고려하였는데 해저 지형의 경우일정수심 혹은 여러 가지 대륙붕 폭을 지닌 지형, 다중 경사 지형 등이 고려되었다. 연안형상의 경우 형태 비율로 특징 지어지는 개방 연안과 만이 고려되었다. 총 763개의 이상적인 시나리오가 모의되었으며 그 결과 연안을 따라 MSH 분포를 분석하였다. 이상적인 시나리오에서 개발된 효과의 적용성을 검증하기 위해 다양한 TS와 LA 조건에서 역사적인 태풍 매미를 기반으로 현실적인 규모의 시나리오 모의가 실시되었다. 그 결과 빠르게 이동하는 TS가 개방 연안을 따라 분포하는MSH를 증폭시킨다는 사실을 재확인하는 등, 연안지형, 태풍의 특성에 따른 최대 푹풍해이고 변화에 대한 다양한 결과를 얻을 수 있었다.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.103-113
• /
• 2020

The construction industry is undergoing a digital transformation in which Building Information Modelling (BIM) is a key technology. The potential of BIM in several areas such as design optimization, time management, cost management, and asset management/facility management (AM/FM) is widely acknowledged by the AECO (Architecture, Engineering, Construction, and Operation) industry around the world. However, BIM implementation in construction projects is faced with problems such as project delay and cost overruns. The lack of identification of risks in BIM projects and standard guidelines on mitigation techniques furthers poor performance, dissatisfaction, and disputes between employers and project participants, which results in low BIM adoption rates. Therefore, the objective of this paper is to identify the potential risks in BIM implementation under the primary categories - (1) technical, (2) contractual, (3) management-related, and (4) personnel-related risks in BIM projects and present solutions to reduce, manage, and mitigate risks. To meet the objective of this paper, a survey was designed and conducted in the Hong Kong construction industry in which over 140 respondents from different disciplines, with experience in BIM projects, have participated. Based on the analysis of the survey data, the most severe and frequently occurring BIM risks and their potential mitigation strategies were identified and discussed in this paper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.8
• /
• pp.1123-1132
• /
• 2015

Winter wheat is a suitable crop to be ensiled for animal feed and China has the largest planting area of this crop in the world. During the ensiling process, lactic acid bacteria (LAB) play the most important role in the fermentation. We investigated the natural population of LAB in whole-crop wheat (WCW) and examined the quality of whole-crop wheat silage (WCWS) with and without LAB inoculants. Two Lactobacillus plantarum subsp. plantarum strains, Zhengzhou University 1 (ZZU 1) selected from corn and forage and grass 1 (FG 1) from a commercial inoculant, were used as additives. The silages inoculated with LAB strains (ZZU 1 and FG 1) were better preserved than the control, with lower pH values (3.5 and 3.6, respectively) (p<0.05) and higher contents of lactic acid (37.5 and 34.0 g/kg of fresh matter (FM), respectively) (p<0.05) than the control. Sixty LAB strains were isolated from fresh material and WCWS without any LAB inoculation. These LAB strains were divided into the following four genera and six species based on their phenotypic, biochemical and phylogenetic characteristics: Leuconostoc pseudomesenteroides, Leuconostoc citreum, Weissella cibaria, Lactococcus lactis subsp. lactis, Lactobacillus buchneri, and Lactobacillus plantarum subsp. plantarum. However, the prevalent LAB, which was predominantly heterofermentative (66.7%), consisted of Leuconostoc pseudomesenteroides, Leuconostoc citreum, Weissella cibaria, and Lactobacillus buchneri. This study revealed that most of isolated LAB strains from control WCWS were heterofermentative and could not grow well at low pH condition; the selective inoculants of Lactobacillus strains, especially ZZU 1, could improve WCWS quality significantly.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.43-51
• /
• 1991

This study was carried out to determine the withdrawal strength of various screws according to root diameter of screw and embeded length on the face and edge of domestic particleboard and medium density fiberboard. The obtained results were as follows: 1. The withdrawal strength of screw in domestic particleboard and medium density fiberboard was closely related to embeded length of the screw but less dependent on root diameter of the screw. 2. The withdrawal strength on the face and edge of domestic particleboard could be predicted by means of the following expression: $F_{Pf}=4.60{\times}D^{0.24}{\times}L^{1.14}(R^2=0.87)$ $F_{Pe}=0.54{\times}D^{0.43}{\times}L^{1.73}(R^2=0.84)$ Where: $F_{Pf}$ : withdrawal strength on the face of particleboard(kgf) $F_{Pe}$=withdrawal strength on the edge of particleboard(kgf) D=diameter of the screw(mm) L=embeded length(mm) 3. The withdrawal strength on the face and edge of domestic medium density fiberboard could he predicted by means of the following expression: $FM_f=1.53{\times}D^{0.53}{\times}L^{1.39}(R^2=0.93)$ $F_{Me}=1.14{\times}D^{0.66}{\times}L^{1.36}(R^2=0.87)$ where: $F_{Mf}$ = withdrawal strength on the face of medium density fiberboard(kgf) $F_{Mf}$=withdrawal strength on the edge of medium density fiberboard(kgf).

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.517-527
• /
• 2020

Layer 2/3 pyramidal neurons (L2/3 PyNs) of the cortex extend their basal dendrites near the soma and as apical dendritic tufts in layer 1, which mainly receive feedforward and feedback inputs, respectively. It is suggested that neuromodulators such as serotonin and acetylcholine may regulate the information flow between brain structures depending on the brain state. However, little is known about the dendritic compartment-specific induction of synaptic transmission in single PyNs. Here, we studied layer-specific serotonergic and cholinergic induction of long-term synaptic plasticity in L2/3 PyNs of the agranular insular cortex, a lateral component of the orbitofrontal cortex. Using FM1-43 dye unloading, we verified that local electrical stimulation to layers 1 (L1) and 3 (L3) activated axon terminals mostly located in L1 and perisomatic area (L2/3). Independent and AMPA receptor-mediated excitatory postsynaptic potential was evoked by local electrical stimulation of either L1 or L3. Application of serotonin (5-HT, 10 μM) induced activity-dependent longterm depression (LTD) in L2/3 but not in L1 inputs. LTD induced by 5-HT was blocked by the 5-HT₂ receptor antagonist ketanserin, an NMDA receptor antagonist and by intracellular Ca²⁺ chelation. The 5-HT₂ receptor agonist α-me-5-HT mimicked the LTD induced by 5-HT. However, the application of carbachol induced muscarinic receptor-dependent LTD in both inputs. The differential layer-specific induction of LTD by neuromodulators might play an important role in information processing mechanism of the prefrontal cortex.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1782-1789
• /
• 2008

This paper presents the design of acoustic resonance(AR) free and dimmable electronic ballast for 1kW Metal-Halide Lamp(MHL). The proposed Ballast consists of a Full-Bridge(FB) rectifier, a passive power factor correction(PFC) circuit, a full-bridge inverter, an ignitor using LC resonance and a control circuit for frequency modulation and dimming control. Whereas a passive PFC provides advantages in terms of high reliability and low cost for constructing the circuit, it is difficult to supply a stable voltage because of the output voltage ripple that occurs with a period of 120Hz. Although the ballast can be designed with a small size and a light weight if it is driven at a switching frequency between 1 and 100 kHz, AR will occur if the eigenvalue frequency of the lamp coincides with the inverter's operation frequency. The operation frequency was modulated in real time according to the output voltage ripple to compensate for the variation in power supplied to the lamp and eliminate AR. For dimming, the method, which modulated drive frequency of FB inverter using the control of DC level by microprocessor, was used. The Dimming ranged at least from 600W to 1kw as rated power of the lamp with 4 stages. Performance of the proposed technique was validated through numerical analysis, computer simulation using Pspice and by applying it to an electronic ballast for a prototype 1kW MHL.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.155-163
• /
• 2006

The defects in a synthesized crystal of ${\alpha}-Al_2O_3$ used as substrate for growing of semi-conductor materials such as GaN were examined by the conventional transmission electron microscopy (TEM), Large Angle CBED and High-Angle Annular Dark Field (HAADF) STEM methods. The dominant defects found in the specimen are basal microtwins with the thickness of ${\sim}2\;to\;32 nm$ and the associated strong strain field at the interface of microtwin/matrix, basal dislocations and complex dislocations in the one of {$2\bar{1}\bar{1}3$} pyramidal slip plane. All these basal and pyramidal dislocations seem to be strong related to basal microtwins. It was also found that the density of defects is very uneven. In the certain area with the dimension of a few fm, the dislocation density is quite high as an order of ${/sim}10^{10}/cm^2, but the average density is roughly estimated to be less than ${\sim}10^5/cm^2, as is usually expected in general synthesized crystals.