• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.19-21
• /
• 1993

The perovskite type ferroelectrics has been studied to make a flim out of ceramic capacitor with large capacity and miniaturization. In this study. we make a capacitor in small size and high capacity, and measure SEM and dielectric permitivity of BCTM ceramic capacitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.228-228
• /
• 2008

본 논문에서는 epoxy bonding film의 phenoxy resin의 함량변화에 따른 특성 변화에 대하여 연구하였다. epoxy bonding film은 미세패턴 구현을 위해서 사용되는 기판재료로써 epoxy, hardener, silica, phenoxy resin 등이 첨가되어진다. phenoxy resin 함량을 변화를 주면서 tape casting 방법을 통해서 flim 형성을 한 후, 제작된 film의 phenoxy resin 함량변화에 따른 조도 특성의 연구를 위해서 sweller, desmear 공정을 후 RA(Roughness Average)를 측정하고, SEM으로 표면을 관찰하였다. 또한 제작된 bonding film을 가열 가압 후 구리 도금공정을 거쳐 peel strength를 측정하였다. phenoxy resin 함량이 증가 할수록 RA가 증가되어지는 것이 관찰되어졌고, 또 한 peel strength 증가하였다.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.439-445
• /
• 1992

최근 광자기 기록매체로 주목받고 있는 RE-TM계 비정질 박막을 T $b_{x}$ (F $e_{0.9}$ $Co_{0.1}$)$_{100-x}$ (x=14, 17, 20, 23, 27[at%])의 조성비를 갖는 모합금을 만든후 진공증착방법으로 합금박막을 제작하였다. 각시료의 조성에 따른 자기광학효과를 알아보기 위하여 80K부터 600K에서 포화자화( $M_{s}$ )와 보자력( $H_{c}$)에 대한 온도의존성과 자기이방성상수(Ku), Polar Kerr 이력곡선을 측정하였다. 또한 Curie 온도 근처에서 열처리 시간에 따른 자기 토크 곡선의 변화를 분석 함으로써 합금박막 표면의 산화정도를 정성적으로 평가할 수 있었다. 실험결과 T $b_{22.72}$(F $e_{68.78}$ $Co_{8.5}$)인 시료가 상온에서 8.4KOe의 보자력을 가졌으며 T $b_{x}$(x=23[at%])인 경우가 가장 큰 수직자기이방성을 나타냈다. Polar Kerr 이력곡선은 Tb함량 x=25~26[at%]에서 부호가 반전됨을 알 수 있었다.다.다.다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.196-198
• /
• 2012

TiN 박막을 자전거용 서스펜션 프레임의 재질로 사용되는 고비강도 경량 합금에 적용하기 위해 Arc ion plating 방식으로 코팅하고 기계적 특성을 분석하였다. TiN 박막의 코팅 특성 평가는 XRD, 박막 경도, 마찰 계수, 밀착력을 측정하였고 피로시험을 실시하였다. 박막의 경도는 약 19 GPa로 측정되었고, 마찰 계수는 약 0.4로써 박막의 코팅 전(마찰계수 0.8)보다 낮아졌다. 밀착력은 약 13.9 N로 나타났으며, 피로 시험은 약 30,000회의 수직 하중 실험에도 박막의 가시적 크랙과 파손이 관찰되지 않았다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.3
• /
• pp.512-520
• /
• 1995

This study investigates the simultanceous heat and mass transfer between a falling desiccant film and air in cross flow at the interface. The application of this work is the optimization of falling film evaporators for use in potential hybrid air conditioning systems. The specific geometry considered is liquid TEG films falling along the vertical cooled surfaces of a channel with air in cross flow. The equations to describe the coupled heat and mass transfer between a falling desiccant film and air in cross flow for a falling film evaporator have been presented and solved numerically. The effects of important design and operating variables on the evaporator performance predicted by the parametric numerical analysis and suggestions for performance improvements of the evaporator are presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.41-42
• /
• 2008

p-type(100) Si 위에 BTMSM과 산소를 혼합한 전구체를 가지고 PECVD 방법을 사용 하여 저유전상수를 갖는 SiOCH막을 형성하였다. 알루미늄 전극을 구현한 MIS (Al/SiOCH/p-si(100)) 구조의 커패시터를 가지고 C-V 특성을 측정하여 유전상수를 계산하였다. 상온에서 증착된 SiOCH 박막의 유전상수는 $450^{\circ}C$에서 30분 동안 열처리 후 뚜렷하게 감소하는 경향을 나타냈으며, 상온 및 대기압에서 공기 중에 노출시켜 자연 산화과정을 겪은 후에 각각의 유전상수는 전체적으로 증가하였지만, 열처리한 박막이 상대적으로 경시효과(aging effects)에 대하여 안정화된 것을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.230-231
• /
• 2006

We synthesized sol according to kinds(particle size/stabilized ion) of colloidal silica(CS), content ratio of alkoxysilane versus CS and reaction degree in sol solution and studied the surface property of coated gel materials. The contact angle of the thin films prepared from LHSA/N1030 CS/tetramethoxysilane(TMOS)/methyltrimethoxysilane(MTMS) sol-gel reaction system showed a little good relationship with content ratio of TMOS/MTMS silanes. The surface roughness of LHSA CS/TMOS/MTMS reaction system showed flatter than that of LHSA/N1030 CS. The thermal degradation of LHSA CS/TMOS/MTMS coating flim occurred at $550^{\circ}C$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.27-28
• /
• 2013

This study investigates the effect of a protective layer on the level of carbonation resistance of concrete. For the protective layer, a PE film, bubble sheets, double layered bubble sheets and styroform were placed in a mold before placing the concrete. In addition, PE film was retrofitted by attaching on the surface of the substrate concrete with a glue. Results showed that the carbonation depths of the control concrete were 4.6 mm and 5.2 mm at one week and two weeks exposure in an accelerated carbonation chamber, whereas the concrete with all types of protective layer except PE flim did not allow the ingress of carbon dioxide during the same period.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.146-148
• /
• 2012

In our study, we have focused on optimizing good quality of ZnS buffer layer by chemical bath deposition (CBD) from a bath containing $ZnSO_4$, Thiourea and Ammonia in aqueous solution onto CIGS solar cells. The influence of deposition parameter such as pH, deposition temperature, stirring speed played a very important role on transmission, homogeneity, crystalline of ZnS buffer layer. The transmission spectrum showed a good transmission characteristic above 80% invisible spectral region. CIGS thin flim solar cell with ZnS buffer layer has been realized with the efficiency of 14.2%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.223-227
• /
• 2007

The effect of Eu contents on the ferroelectric properties of $Bi_{4-x}Eu_xTi_3 O_{12}$ (BET) thin films has been investigated. Bismuth Europium titanate thin films with a Eu contents were prepared on the $Pt/Ti/SiO_2/Si$ substrate by metal-organic decomposition technique. The structure and the morphology of the films were analyzed using X-ray diffraction (XRD) and field emission scanning microscopy (FE-SEM), respectively. From the XRD analysis, it was found that BET thin films have polycrystalline structure, and the layered-perovskite phase is obtained when the Eu contents exceeds 0.2 (x > 0.2). Also, the ferroelectric characteristics of the BET thin films were found to be dependent on the Eu content. Particularly, the BET films doped with x = 0.75 show better ferroelectric properties (remanent polarization 2Pr = 60.99 C/$cm^2$ and only a little polarization fatigue up to $3.5{\times}10^9$ bipolar switching cycling) than those doped with other Eu contents.