Search | Korea Science

Kang, Moo-Sung;O, Jae-Hyung;Park, Dae-Hee;Han, Sang-Ok
- Proceedings of the KIEE Conference
- /
- 1996.11a
- /
- pp.221-223
- /
- 1996
The test on the breakdown strength and the electrical conduction property about the PET flim have been done when the interface exist and do not exist between the PET flim. The PET flim that does not exist the interface uniformly maintained the breakdown strength as the temperature increase. But, the breakdown strength of the PET flim inserted carbon black flim decreased as the temperature increase. The initial current of the PET flim inserted carbon black flim was higher than the PET flim and the uniformly distributed between 2.2E-9 and 2.5E-9 above 5kV/mm.
PDF

Kim, Jayul;Ryu, Jiheun;Gweon, Daegab
- Applied Microscopy
- /
- v.46 no.1
- /
- pp.6-13
- /
- 2016
Fluorescence lifetime imaging microscopy (FLIM) has been considered an effective technique to investigate chemical properties of the specimens, especially of biological samples. Despite of this advantageous trait, researchers in this field have had difficulties applying FLIM to their systems because acquiring an image using FLIM consumes too much time. Although analog mean-delay (AMD) method was introduced to enhance the imaging speed of commonly used FLIM based on time-correlated single photon counting (TCSPC), a real-time image reconstruction using AMD method has not been implemented due to its data processing obstacles. In this paper, we introduce a real-time image restoration of AMD-FLIM through fast parallel data processing by using Threading Building Blocks (TBB; Intel) and octa-core processor (i7-5960x; Intel). Frame rate of 3.8 frames per second was achieved in $1,024{\times}1,024$ resolution with over 4 million lifetime determinations per second and measurement error within 10%. This image acquisition speed is 184 times faster than that of single-channel TCSPC and 9.2 times faster than that of 8-channel TCSPC (state-of-art photon counting rate of 80 million counts per second) with the same lifetime accuracy of 10% and the same pixel resolution.
https://doi.org/10.9729/AM.2016.46.1.6 인용 PDF KSCI

박수길;김종진;이창진;김상욱;김현후;임기조;이주성
- Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
- /
- 1997.04a
- /
- pp.269-272
- /
- 1997
The Lithium ion secondary battery has been developed for high energy density of portable electrical device and electronics. Among the many conductive polymer materials, the positive active film for Li polymer battery system was synthesized successfully from polyphenylene diamine(PPD) by chemical polymerization in our lab. And PPD-DMcT(2, 5-dimercapto-1, 3, 4-thi-adiazole) composite flim conductive material, at high temperature was also prerared with the addition of dimethylsulfoxide(DMSO). The surface morphology and thermal stability of prepared composite flim was carried out by using SEM and TGA, respectively. Electrochemical and electrical conductivity of composite flim were also discussed by cyclic voltammetry and four-probe method in dry box(<27pm). And the electrode reaction mechanism was detected and analyzed from the half cell unit battery system.
PDF

김정달;박재윤;정장근;김종석;하현진;이용길
- Journal of the Korean Institute of Electrical and Electronic Material Engineers
- /
- v.14 no.5
- /
- pp.391-396
- /
- 2001
The purpose of this study is to investigate the effect of hole or crack on the Insulation characteristics of a PET films for EHV(Extra High Voltage) VT winding. The hole or the crack in the PET films was made and the insulation characteristics of them were measured. Ad an experimental result, it was shown hat he PDIV(Partial Discharge Inception Voltage) and the BDV(Breakdown Voltage) of the PET films with hole or crack were lower than those without them, and were markedly dependent on their position and temperature. Therefore, the hole and the crack affected to insulation characteristics of PET films for SF$_{6}$EHV(Extra High Voltage) VT Winding.g.
PDF

Park, Pyeong-Whang;An, Chul
- Proceedings of the KIEE Conference
- /
- 1987.07a
- /
- pp.539-541
- /
- 1987
P+ ion implanted poly-Si flim with doses of 10E13-10E16 ions/$cm^2$ were annealed by CO2 laser and their sheet resistances were measured and compared with thoses of furnace annealed samples. In case of lightly doped samples, the measured sheet resistance of laser annealed samples were lower several orders of magnitude than those of furnace annealed samples. The origin of this reduction of sheet resistances is supposed to be the increase of the grain size to the extent of certain critical value.
PDF