• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.427-434
• /
• 2023

Oysters are an important organism, accounting for an average of 76% of shellfish aquaculture production. In this study, optimal habitat was searched for by calculating the Habitat Suitability Index (HSI) using water temperature, salinity, hydrodynamics, DO, SS and Chl.a in Jaran Bay. As a result, the inside of Jaran Bay was found to be a more suitable habitat than the outside with a wide entrance and rapid hydrodynamics. Oyster production and HSI showed a significant correlation (0.710, p<0.05). Hydrodynamics helps the growth of aquaculture organisms, such as food supply through seawater exchange in the bay, which showed a high correlation (0.709, p<0.05) with oyster production. It was found to have a greater effect on habitat suitability than Chl.a. The results of this study are expected to be helpful for the efficient conservation, use and management of coastal fisheries.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.15-27
• /
• 2010

This study investigated the sedimentary environment changes in the Baramarae beach of Anmyeondo through spatio-temporal surface sediment analysis. In the winter season 2009, surface sediments were classified into 7 sedimentary facies such as gravel, sand, gravelly sand, gravelly muddy sand, muddy sand, silty sand, and sandy silt. Time-series analysis of average grain size from 2002 to 2009 revealed that the average grain size of sediments became finer and sorting was much worse. On the contrary, during the same period, the grain size became coarsening-trend and sorting was much better in beach area. These different grain size patterns resulted from the different change characteristics of beach and tidal flats. The southwestern beach area was connected to the open sea and thus fine sediments were removed by the environments with relatively high-energy. The sedimentation of fine sediments in the bay resulted from the tidal current action and the reduction of energy by the topographic effects. Fine sediments in the outer part of southwestern tidal flats could be explained such that the Seomot isle blocked ocean waves and as a result, low-energy environments accelerated sedimentations of fine sediments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.14-21
• /
• 1997

This experiment was conducted to identify the growth and yield differences in rice cultural types: Broadcasting on flooded paddy surface(BF), drilling on flooded paddy surface(DF), puddled-soil drill seeding(PD), drill seeding on dried paddy flat(DD), and machine transplanting of lO-day old seedling(MT) at National Honam Agricultural Experiment Station in 1995. Among the cultural types of direct seeding, the number of seedling stand showed high in order of DD>BF>DF>PD. Tillering at early growth stage was faster in MT and effective tiller showed higher in MT than in direct seeding. Growth duration from seeding to heading was longer in direct seeding than in MT for 2-13 days of Dongjinbyeo and 10-18 days of Nonganbyeo. Root distribution ratio at the surface soil revealed high in order of BF>DF>PD>DD and MT. Culm wall thickness of 4th internode was thicker in machine transplanting of 10-day old seedling than in direct seeding, and the depth of buried culm showed deep by turns of MT> DD>PD>DF and BF. The height of center gravity and moment related to lodging revealed higher in direct seeding than machine transplanting that resulted high lodging index by turns of BF>DF>DD> PD among the direct seeding cultural type. Lodging was occured seriously in the order of BF>DF>PD>DD =MT in Dongjinbyeo but wasn't significantly different in Nonganbyeo among the cultural type. The yield components and grain yield showed varietal differences but was not significantly different between in MT and in direct seeding, and among cultural types of direct seeding.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.13-26
• /
• 2023

Recently, as the development of underground spaces has become active due to rapid urbanization and population density, interest in the ground behavior according to the construction of underground spaces is increasing. In large cities with high population density and many buildings, ground subsidence has a great impact on structures and there may be a risk of collapse, so the analysis of ground behavior due to underground construction is essential. Previous studies have been conducted on the subsidence pattern of the surface and the deformation of the tunnel when constructing the tunnel, but analysis has rarely been conducted by using actual topographic information. Therefore, this study analyzed the difference in ground behavior between the actual topography and the flat topography. As a result, it was confirmed that ground settlement occurs at higher elevations, such as in mountainous topography, and when the numerical analysis is performed considering topographical information, the crown settlement of the tunnel is up to about approx. It showed a difference of 10 mm, and it was found that the sensitivity was less in the case of displacement of tunnel wall compared to the crown settlement and ground settlement. The numerical analysis considering the actual GIS-based topographic information presented in this study can be used to obtain more accurate surface subsidence data to understand the behavior of the upper structure due to tunnel excavation.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.292-304
• /
• 2023

Purpose: This study was conducted to obtain experimental data for the establishment of preventive measures against fire, as large and small fire accidents occur at production and storage sites of superabsorbent polymers developed for the convenience of daily life. Method: The sample container was fixed at 0.2m in both length and width, and was shaped into a rectangular cuboid with heights of 3cm, 5cm, 7cm, and 14cm to access an infinite flat plane. The sample container was fixed in the center of a thermostatic bath that was heated to a predetermined temperature according to a preset temperature control program. If the central temperature of the sample rose more than 20℃ above the set temperature, it was determined to have 'ignited', and if it remained similar to the set temperature, it was determined to have 'unignited'. Result: The critical autoignition temperature was calculated to be 212.5℃ for a sample container with a height of 3cm, 202.5℃ for 5cm, 192.5℃ for 7cm, and 177.5℃ for 14cm. The ignition induction time to reach the highest temperature was approximately 42hours for 3cm, 91hours for 5cm, 151hours for 7cm, and 300hours for 14cm. Conclusion:① As the size of the sample container increased, the autoignition temperature decreased and the ignition induction time to reach the highest temperature increased. ② The apparent activation energy was calculated to be 39.30kcal/mol, with a correlation of 99.5%.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.280-291
• /
• 2023

Purpose: As fire accidents happen at the production and storage sites of superabsorbent polymers for convenience of daily life, an experimental study was conducted to secure basic data to establish practical preventive measures against them. Method: The sample container (20cm width × 20cm length) was made into a rectangular cuboid with the heights of 3cm, 5cm, 7cm, and 14cm, respectively, to allow access to the infinite flat plane. The front and back of the container were covered with a 300-mesh stainless steel mesh for one-dimensional heat transfer. The sample container was placed in the center of the thermostatic bath, which was heated to a predetermined temperature by setting the thermostat program in advance, and it was determined to be 'ignited' when the central temperature of the sample rose by more than 20℃ above the set temperature, and "unignited" when it was maintained at an approximate value of the set temperature. Result: The critical autoignition temperature was calculated to be 217.5℃ when the height of the sample container was 3 cm, 212.5℃ when it was 5 cm, 202.5℃ when it was 7cm, and 187.5℃ when it was 14cm. The ignition induction time to reach the maximum temperature was 34hours for 3cm, 76hours for 5cm, 143hours for 7cm, and 318hours for 14cm. Conclusion: ① As the size of the container increased, the autoignition temperature decreased and the induction time to reach the maximum temperature increased. ② An apparent activation energy was calculated to be 44.92kcal/mol, with a correlation of 96.93%.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2023

This study reveals the absence of standard design guidelines by region through investigation and analysis centered on public design cases by region in Jeollabuk-do and design elements that can reflect the integration, identity, and diversity of public design in each region by five regions. Through this, the following conclusions could be obtained. First, to improve the quality of street facilities in Jeollabuk-do, the design elements (design motif, color, pattern) applicable to the standard design were analyzed by dividing them into five regions. As a design motif, it was possible to extract patterns containing straight lines, sophistication, dignity, and smartness. In the Northeast region, it is comfortable with the motif of the mountain ridge reflecting geographical characteristics, and it can be extracted elements that contain warm and natural colors. In the southeastern region, patterns that reflect design elements were extracted by applying safe, lively, and peaceful colors with the design motif of curves that blend nature and agriculture. In the southwestern region, design pattern elements that highlight nature, history, and culture were extracted with various cultural assets and natural greenery as motifs. Lastly, in the Saemangeum region, the ocean flow and greenery could be used as a design motif to reflect a positive, clear, future-oriented image in the design spot zones by region. Second, based on the standard design elements (design motive, color, pattern) by region extracted for the standard design development of street facilities in each region in Jeollabuk-do, an integrated zone(Form, structure, material, color, functional element) to which regional design guidelines can be applied. Third, an integrated zone (form, structure, material, color, functional elements) was composed. In addition, design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region were designated. By designating design spot zones (patterns and colors in city and county units) that can contain the diversity and identity of each region, standard design development plans (integrated pillars, jaywalking prevention fences, roundabouts (urban type, rural type), street trees) Eight standard designs, including protective covers, street planters, flat benches, light benches, visual media for user guidance, and parking zones for personal mobile devices) were presented.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.4
• /
• pp.27-36
• /
• 2010

In this study, a series of flat dilatometer tests are performed for Busan sand reconstituted in a large calibration chamber to evaluate the state parameter ($\Psi$). Experimental result shows that the horizontal amplification factor ($K_D/K_0$) is linearly related with state parameter in semi-logarithmic space, but the $K_D/K_0$ of OC specimen is smaller than that of NC specimen because of the horizontal residual stress by stress history of OC specimen. The relation between the normalized dilatometer modulus ($E_D/\sigma_m'$) and the state parameter is also linearly expressed in semi-logarithmic space, and the effect of stress history is relatively insignificant in this relation. However, the variation in $E_D/\sigma_m'-\Psi$ relation of NC state is slightly higher than that of OC state due to the effect of the stress level, and the correlation curve is descending with increase of confining stress. The comparison of test result with previous results of Ticino and Toyoura sands shows that the $E_D/\sigma_m'-\Psi$ relation of Toyoura sand is located on upper side than that of Busan and Tieino sands due to the effect of the higher compressibility, whereas the $K_D/K_0-\Psi$ relation of each sand is irregularly distributed.

• Conservation Science in Museum
• /
• v.29
• /
• pp.47-64
• /
• 2023

Daehye Bogakseonsaseo (Letters of Master Bogak) in the possession of the National Museum of Korea is a Goryeo-era book produced in 1387, which was acquired in 2005 in a state of severe general damage. Subsequently, its production techniques and materials were examined using bibliographical characteristics and scientific analysis, based on which an overall conservation treatment was carried out. Janghwang(mounting) in bibliographical characteristics is a five-hole-stitch binding (五針眼線裝本), a single-lined rectangular box (四周單邊), and no column lines. The conservation treatment was examined in two aspects: the basic form and the conservation treatment process. The book is composed of the outer cover, original cover, end paper, and inner paper of 0.04-0.07mm thick, which is significantly thinner than general book paper. The conservation treatment was applied after the entire book was disassembled, based on the assessment that both the cover and the inner sheets of paper were in a dire condition due to deterioration. The conservation treatment comprised of the process of disassembly, cleaning, reinforcement of defective parts, scanning, and binding, with a paulownia box made for its storage. At the time of disassembly, samples were made for the inner sheets and the book string in order to conduct fiber identification. The fibers were identified using Safranin and C-stains. Safranin staining identified a thick fiber wall, in addition to cross-marking, dislocation, and transparent membranes. C-stain staining identified the fiber as mulberry, given the dark red residue. The book strap has a flat, circular cross-section, and was identified as cotton fiber, since a lumen was observed in the center.

• Journal of Popular Narrative
• /
• v.25 no.2
• /
• pp.279-302
• /
• 2019

This paper introduces Youngju Ryu's Writers of the Winter Republic: Literature and Resistance in Park Chung Hee's Korea, and examines its significance and limitations. The book examines the relationship between literature and politics during the Park Chung-hee Yushin era, focusing on Yang Sŏng-u, Kim Chi-ha, Yi Mun-gu, Cho Se-hŭi, and Hwang Sok-yong. The books starts by describing the relationship between the U.S. hegemony and the Park Chung-hee regime during the Cold War. The book shows how poets like Yang and Kim fought against the Park Chung-hee regime based on poems, trial records and memoirs, while it describes novelists such as Yi's resistance by how novels envisioned a community against the Park administration based on the keyword "neighborhood." This is significant in that it describes how literature from the Park Chung-hee era was able to stand on the front lines against the regime. However, it is regrettable that because the book adopts a heroic tale to describe their lives and literature, these are illuminated in a somewhat flat way. Also it is noteworthy that the lives and works of novelists after the 2000s were illuminated, but Yang and Kim's life and literature were not described. Furthermore, it is regrettable that women writers were not mentioned and its concept of "politics" is rather shallow. Overall, this book is very significant in that it introduces the relationship between Korean literature and politics in the Korea of the 1970s with rich data and a beautiful style, as well as allowing Korean studies researchers to reflect on the future of Korean studies.